Formier

WEINIG Unimat 1000 Star

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Ksdpfx Asvrq U Dopdslu

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Kedpfxou Damdj Apdelu

Condition: good (used), functionality: fully functional, roll diameter: 80 mm, total width: 1,250 mm, total length: 40,750 mm, conveying length: 40,750 mm, power: 1.1 kW (1.50 HP), roll spacing: 160 mm, axle spacing: 160 mm, frame height: 185 mm, frame width: 85 mm, Pallet roller conveyor/roller conveyor/pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive System consists of 9 segments 6 x approx. 5.75 meters long 1 x approx. 5.30 meters long 1 x approx. 2.00 meters long 1 x approx. 0.95 meters long Each element is equipped with its own motor. Total length: approx. 40.75 meters Total width including motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveyor width: approx. 820 mm Roller diameter: approx. 80 mm Axles/axle spacing: approx. 160 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Kljdpfxjtrv Anj Apdou Color: Blue Includes pallet guide Includes SEW motor (1.1 kW) Includes feet (height-adjustable) The conveyor system was in operation until dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. Ksdpfjif N Sxsx Apdelu 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.

Condition: used, Number of boring spindles 6 St. Working width 230 mm Ksdjya Hh Tspfx Apdslu Working height 120 mm

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Klodpjrb An Uefx Apdju Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Klsdov Si Szepfx Apdou Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, K+G Wetter Bowl Cutter Klsdpfxex A Tx No Apdju -Type: SM 90 -Power: 33 kW -Bowl capacity: 90 L -2 bowl speeds -Power supply: 380V 50Hz -Weight: 1420 kg -Made of stainless steel -Dimensions: 2000 x 1400 x 1600 mm -Sound-absorbing enclosure (Plexiglas) -Stock quantity: 1 -Condition: Used in very good condition, overhauled, ready to work

Condition: excellent (used), Year of construction: 1998, I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Kljdpfx Apjfzzhyjdsu Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Klodew S Tyajpfx Apdju