Used Welding Dust Extraction for sale (12,079)

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Bwedpfxjzq A Ezs Am Ejw Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Bwedpfx Ameuy N S Uo Ejw Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 201000090615, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 6,000 m³/h, Coral Eurofilter 3000 Bwodpfx Aj Ahuq Nsm Eow Machine Number 201000090615 Year of Construction 2010 Specifications: Manufacturer: CORAL S.p.A. (Italy) Model: EUROFILTER 300 Production Year: 2011 Motor Power: 7.5 kW Operating Voltage: 400 / 690 V Frequency: 50 Hz Rotational Speed: 2800 rpm CE Marking: Yes

Year of construction: 1985, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower Bwedsz Im I Eepfx Am Eew -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-300- -Volume flow rate: 50000 m³/h -Total pressure: 2600 Pa -Motor: Schorch 55 kW 1470 rpm -Inlet connection: Ø 800 mm -Outlet connection: Ø 800 mm -Fan wheel: Ø 1340 x 300 mm -Protection class: IP 54 -Dimensions: 3140/1500/H2480 mm -Weight: 1770 kg

Condition: new, WAM FLO dust collector, extraction filter unit, filter, extraction system New Fan motor power: 3 kW, 3000 rpm Filter area: 22 m2 Bwodjwyf Aqepfx Am Esw Equipped with electro-pneumatically cleaned filter cartridges Stainless steel 304 Zero dust emission 5 units in stock See our other listings VMA Wekerom

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: Bsdpfx Aou Aafdjm Eeww - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka Bwodpfx Aeuud Irom Ejw (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency Bjdpfx Amjy N Duqe Esww - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm Bjdpfx Ameb A Sius Eoww -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Condition: good (used), Year of construction: 1992, radial fan, dust extraction blower, fan, extraction, dust blower Bwedpfxsb Rh U Tj Am Eew -Motor power: approx. 3 kW -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Condition: excellent (used), OptiAir unit to extract dust when predusting food products with fine flour. Bwjdpfx Asx Hamqsm Esw

Condition: used, volume flow: 930 m³/h, intake manifold diameter: 180 mm, filter area: 17.6 m², nominal power: 15 kW (20.39 HP), Kiekens filter including filter bags (used) Separate fan unit with matching ductwork from filter to fan. filter surface area 17.6 m² 15 kW fan 32.0 kPa max. 930 m³/h max. mechanical cleaning: Bwjdpow Rbwwjfx Am Esw 0.25 kW 1.1 A 690 rpm

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils Bwedpfjzxtz Nex Am Eew - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Year of construction: 1982, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-250-A -Volume flow rate: 5000 m³/h -Total pressure: 3000 Pa -Motor: Schorch 7.5 kW 2930 rpm Bwodoz Hu Svspfx Am Esw -Inlet connection: Ø 240 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 420 x 100 mm -Protection class: IP 54 -Dimensions: 1400/760/H870 mm -Weight: 230 kg

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Bedpjv Taq Refx Am Eeww Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Year of construction: 1986, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL-450- Cex -Volume flow rate: 12500 m³/h -Total pressure: 2100 Pa -Motor: Schorch 11 kW 1450 rpm -Inlet connection: Ø 450 mm Bjdpez Im U Esfx Am Eeww -Output connection: 635 x 510 mm -Fan wheel: Ø 770 x 160 mm -Protection class: IP 44 -Dimensions: 1530/1360/H1290 mm -Weight: 578 kg

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 252 m², suction capacity: 16,000 m³/h, Extraction unit, dust collector, work station Donaldson Torit ECB-2. The ECB work station is ideal for finishing work on large components with irregular shapes. This efficient, flexible, and cost-effective self-contained workstation is engineered to remove fine airborne dust without restricting operator movement or visibility. Thanks to Donaldson’s patented filter media, no other standalone workstation offers a more effective or efficient dust filtration system. The Donaldson ECB is a budget-friendly choice for autonomous workstations. There is no need for duct installation, which reduces installation costs. The ECB further saves costs by recirculating cleaned air, helping to reduce energy expenses. Operators can be more productive when working in a cleaner and safer environment. Designed as a standalone unit, the Donaldson ECB booth is the ideal solution for work environments that require maximum flexibility. It can boost productivity by adapting to the requirements of almost any task, and is easy to relocate, allowing for adjustment to changes in plant layout. Brand: Donaldson Torit Model: ECB-2 Year of manufacture: 2008 Specifications: EX fans – 2 x 4 kW Bodpfx Amjx Hf Rno Ejww Capacity – 2 x 8,000 m³/h (16,000 m³/h total) Option to operate with a single fan Filtration area – 252 m² Donaldson Ultra WEB filter cartridges – 12 pcs Inventory number: 1041

Condition: excellent (used), For sale is a powerful, industrial radial fan from the renowned Italian brand Euroventilatori International S.p.A. This machine stands out for its high-quality construction and ATEX certification, meaning it is suitable for use in potentially explosive environments (e.g., dust extraction in woodworking plants, paint shops, or the chemical industry). ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Euroventilatori International S.p.A. (Italy) Fan Type: TH 1002/A LG315 ES4 Year of Manufacture: 2010 Serial Number: X100638 Motor Power: 37 kW Bwodpfx Aozp Alfem Eew Motor Type: 225S (4 poles / 50 Hz) Fan Speed: 1470 rpm ATEX Certificate: CE Ex II 3D c T125 (compliant with directive 94/9/EC) Permissible fluid temperature: from 15°C to 80°C Permissible ambient temperature: from -15°C to 40°C Reference documentation: SAXN1010 🛠️ ADVANTAGES AND APPLICATIONS: Operational Safety (ATEX): The fan meets stringent explosion-proof standards for dust zones (3D). Ideal for extensive dust extraction systems, silos, and filters where there is a risk of dust ignition (e.g., wood dust). High Performance: A 37 kW motor guarantees enormous suction and discharge force, allowing it to handle entire production lines or extensive ventilation systems. Italian Reliability: Euroventilatori is one of the leading European manufacturers of industrial fans, guaranteeing a robust construction and long-lasting, trouble-free continuous operation. Durability: Designed for the transport of dusty air in harsh industrial conditions. 📍 ADDITIONAL INFORMATION: Condition: Used, fully functional. The machine is ready to be implemented in a demanding production environment.

Condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: unfortunately no longer readable -Motor: Loher eA 112MA-4 (EX) e G 1/2 3.6 kW 1410 rpm -Inlet connection: Ø 450 mm -Output connection: 450 x 275 mm -Fan wheel: Ø 600 x 190 mm -Protection class: IP 44 -Dimensions: 1030/760/H1020 mm -Weight: 132 kg Bodpez Syx Hjfx Am Eoww

Condition: good (used), Storage location: 3129 Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Bjdpfx Amozmaw Hj Eoww Maximum operating temperature: 50 °C Impeller diameter: 480 mm Suction port diameter: 380 mm Connection: 0.37 kW 220/380 V Condition: good Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. Bodpfetq Ufvsx Am Esww As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan Bwedjt Hy Ulspfx Am Esw -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1010215351, overall weight: 95 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating Temperature Range: 0 – +50°C Operating Voltage: 400V/50Hz Control Voltage: 24V DC Connected Load: 7.5 kW Max. Device Airflow: 750 m3/h Min. Airflow: 150 m3/h Max. Vacuum: 380 mbar Bedpfxowq Rvws Am Eoww The Fumator Minivac 500D is a powerful and reliable extraction system designed to effectively remove smoke, dust, and fumes from industrial work areas. Its compact design enables flexible integration into various production environments, while its efficient technology ensures a clean and safe working atmosphere.

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Bedpfxswcd I Ro Am Eeww Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Bwjdpfx Amjpgnfds Eew Filtration area - 14.56 m2