Used Welding Robot Cell for sale (12,345)

Condition: good (used), dimensions: 4200x2750mm Dodpfxjhtzgpo Addola height: 2400mm

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Dodpfswypqljx Addjla Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Dledpfxewc A Rdo Addja

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Dodpfx Aenr E Eneddjla Plant can still be visited in operation.

Condition: good (used), Dimensions: 5500x2750mm Height: 2400mm Dlsdpfx Aohtzgdsddja

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Dljdpjxctwlofx Addja

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Djdpfx Ajxct Anoddsla

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Dlsdsxgqy Ejpfx Addja Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch. Dledpfx Adjp Am T Ujdsa

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Dledpfxorl S Ufs Addja Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Djdpehzhynefx Addela Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Lifting capacity: 20kg Dlodpfx Ader Aka Aodja Reach: 1726mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Elite Robot CS620 (1750mm range) with programming flange and software Fronius TPSi 500 Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Machine frame System is ready for welding immediately Djdpfx Adjv Dvllodola

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 1720 kg Measurements height 2300 mm Dimensions Machine Length 3990 mm Main Drive Dedpfox D Dizox Addjla Number of axis 6 This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information. Application Types Welding

Condition: as good as new (ex-display), Year of construction: 2015, load capacity: 6 kg, arm reach: 1,445 mm, Industrial welding robot with 6kg capacity and 1445mm reach. The robot was used as an exhibit. It is unused. Dsdpfx Aeqcunaeddola

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Model: IRB4600 Year of manufacture: 2017 System consists of: ABB Robot IRB4600 Control cabinet Handheld operating device Dodowrcn Uepfx Addsla Laser cleaning unit Clean Laser type intelliScan30 Extraction system TEKA

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,670 h, functionality: fully functional, overall weight: 29 kg, load capacity: 5 kg, We have dismantled the robot from a cell and inspected it. It is fully operational and has completed a test run. Previously, it was used to place injection-moulded parts into packaging. The operating hours are accurate. The machine can be inspected at our premises upon request. It can also be shipped after prepayment. The unit is placed on a pallet measuring 1000x1000x700 mm and weighing approx. 110 kg. Dljdpjx A Agpefx Addsa

Condition: reconditioned (used), Year of construction: 2002, operating hours: 12,900 h, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, Dodpfocrtlijx Addela control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm warranty: 6 month for material

Year of construction: 2020, condition: ready for operation (used), A Panasonic welding robot cell with two rotary tables is available. Fixture contour rotary table/per side: 3800mm/1200mm, working height: 900mm, robot: TM-2000, positioner: PanaDice, max. load capacity: 2x1000kg, welding cell: PA-ET-2PD-XL, torch equipment: ATU011060. Overall system dimensions X/Y/Z: approx. 7050mm/4100mm/2500mm, weight: approx. 5300kg, control: Siemens PLC S7-1200, HMI: Siemens KTP 900 Basic. Documentation vorhanden. An on-site inspection is possible. Dsdpfjx Auppex Addola

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand ABB Additional Equipment Robot arm specialized for welding Single axis rotator Rotating device holder disc of positioning equipment Support page Automatic welding head cleaning equipment Automatic TCP checking and correction equipment Seam detection sensor Arc sensor seam tracking system integrated into the robot control Complete safety system (without exhaust system) This Yaskawa Motoman AR1440 was manufactured in 2019. A robust welding robot, it offers precision and efficiency for your welding needs. Consider the opportunity to buy this Yaskawa Motoman AR1440 welding robot. Contact us for more information. Djdpfx Adjx D Nxbsdsla Application Types Welding

Year of construction: 2004, condition: good (used), Manufacturer: KUKA Type: KR 210 L 180 Dodoh Dwxwspfx Addsla Year of manufacture: 2004 Net weight: 1245 kg The robot is fully functional, tested! Addendum to the measurement report!

Condition: ready for operation (used), Year of construction: 2015, This KOVACO SP 50 DP was manufactured in 2015. It features a robust welding positioner with a table size of 1200x1800 mm and a capacity of 5000 kg. The stroke reaches up to 1200 mm, and it offers a tilt range of 0-90 degrees and full table rotation from 0-360 degrees. Consider the opportunity to buy this KOVACO SP 50 DP welding robot. Contact us for more information about this machine. Application Types Dlodpfx Adox D N A Hedja Welding

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand KUKA Model KRC4 Dlsdpfx Asx D Hzmsddja Main Drive Number of axis 6 Additional Equipment Component holder (cradle) between the rotary tilting table and the counter bearing. L = 4250mm x 1000mm. 16mm holes as provided. Connection to the faceplates with standard Bräuer drilling pattern (installation height is still to be adjusted to ensure the largest possible turning radius). The component holder is designed for quick change. (Brauer Standard) These KUKA welding robots are featuring a turn-tilt module with a maximum load capacity of 2600kg and a KUKA KL4000 track. If you are looking to get high-quality welding capabilities, consider this pack of weding robots we have for sale. Contact us for more information about it. Application Types Welding

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Dsdpox D Hdhjfx Addela Media Power consumption 36 kVA This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Application Types Welding

Condition: ready for operation (used), Year of construction: 2022, Table Table load 12.5 kg Media Chip conveyor Yes Additional Equipment operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Application Types Dlsdpfxex D E Hue Addsa Welding