Used Welding Robot Cell for sale (8,528)

Condition: excellent (used), Here, we offer you an Omron SCARA industrial robot. Omron SCARA industrial robot with PB programming box, R6Y XGL400 XG series. Tjdpfjzdywhjx Abtob SCARA robots for industrial applications: • Higher reliability (no belts in the XG series, no moving electronic parts) • High precision and speed • Minimal maintenance • Easy to use • High stiffness • Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Max. payload ranges: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/- 0.01 mm R: +/- 0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/- 140° Y-axis +/- 144° Z-axis ——° R-axis +/- 360° Type: R6Y XGL400150 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs Tedpfszkanaox Abtsb - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2002, Technical details: x-travel: 1500 mm z-travel: 1300 mm control: YASNAC XRC Steuerung total power requirement: 3,3 kVA Total weight, approx.: 3.200 kg Welding robot plant consists of: -welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and E-welding up to 500A; air cooling; protection class IP 23 -Wire feed EWM, type Phoenix Drive 4 ROB WE, wire Ø 1,0 - 1,2mm, feed 0,5 - 24 m/min., protection IP 23 -MIG/MAG gas shielded welding torch BINZEL for wire Ø 0,8 - 1,6mm -Robot ERCS UP6-RE00 with control YASNAC XRC control, travels Y-way=1.500mm and Z-way=1.300mm, circular movement swivel=approx. 90° right/left, swivel radius=1.000mm, turn 360°, welding gun rotate 360° with projection max/min: 1.500 / 500mm -1x control cabinet L:900 x W:900 x H:2500mm -1x control cabinet ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900mm -1x welding table L:4.400 x W:550 x H:1.100mm, with compressed air connection 10 bar, working area LxW 1.200 x 340mm, X-way 3.250mm. furthermore: Tjdpfx Asu R Dfkebtjb 1x straightening station DETEC manufacturing (with working table and straightening unit) 1x butt welding station with feeding table i.D. *

Condition: used, Year of construction: 2006, Technical details: workpiece weight: 1,1 t control: RobAssist über makro-Technik / VME-Bus-CPU Tedpfx Aevzq Hrebtob Rotary-table: Ø 800 mm rotary table tiltable: 370° Grad table - tiltable: 115° Grad total power requirement: 35 kVA Total weight, approx.: 4000 kg dimensions L x W x H: Roboter: ca. 2,5 x 4,5 x 3,8 m dimensions electric cabinet: ca. 600 x 800 x x2200 mm dimensions L x W x H: Absaufanlage: ca. 0,7 x 0,8 x 2,7 m dimensions L x W x H: Drehmodul: ca. 1,4 x 1,4 x 1,1 m The system is currently in the technical department. Welding robot system consists of: -Gantry with robot: Reis Robotics, RVL20-16.3 kVA, stroke radius max. approx. 1600 mm, speeds = axis 1: 3 m/sec, axis 2: 185°/sec. Axis 3: 150° / sec., axis 4: 450° / sec., axis 5: 450° / sec., axis 6: 500° / sec, -2x columns: Column spacing 3300 mm, columns on base plate 900x900mm; columns Ø 350 mm -Turntable/tilt and turn module: Model RIS, type RDK11 Torque max. tilting axis = 4,200 Nm and turning axis 2,200 Nm Speed of tilting axis = 19° / sec. and turning axis 45° / sec. -Welding unit: Fronius, type TPS 2700; welding current range: MIG/MAG 3-270 A and electrode 10-270 A as well as TIG = 3-270 A; protection class IP 23 -Welding fume extraction: Teka, type DUST Buster DB-302 R, air volume flow max. 300m³/h, filter class Kategori C, filter area 2.2 m² -Cooling unit: Type FK 4000 R, power 2 kW, protection class IP 23, pressure 4 bar Equipment: -safety light barrier with transmitter and receiver Hand-held programming device *

Condition: like new (used), Description of system area This is a pure component delivery Robot KR 8 R 1620 arc (HW) The KR 8 R1620 arc HW industrial robot stands out in its class thanks to its high flexibility and long reach with optimum payload capacity. Furthermore, the robot was specially designed and developed for the welding process. - Nominal payload: 8 kg - Maximum reach: 1621 mm - Number of axes: 6 - Position repeatability (ISO 9283): ± 0.04 mm - Installation position: any angle, floor, ceiling, wall - Protection class (IEC 60529): IP54 - Degree of protection central hand (IEC 60529): IP54 - Hollow shaft The robot mechanics are supplied in the color R0000 KUKA Orange. The color of the base frame differs depending on the robot model (exception: KR 3 AGILUS and KR AGILUS-2, delivered with grey base frame). Linear unit Todpfxjudb E Ej Abteb KL 250-3 1CA (carrier length = 8m/ stroke = 7.1m) -further data on request-

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: Serial No. 130594, load capacity: 100 kg, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Motoman, Equipment: documentation/manual, Complete Yaskawa ES165D-100 robotic palletizing cell with DX100 controller For sale is a complete, fully functional palletizing cell, which is currently still in use in our production facility and can be inspected under load by appointment. The system is used for the automatic palletizing of cartons containing snack products and is fed via two infeed lines. Scope of supply: Yaskawa Motoman ES165D-100 (100 kg payload) Yaskawa DX100 controller complete control cabinet gripper system protective enclosure / safety fences two vertical conveyors two outfeed conveyors complete palletizing cell Technical data Year of construction: 2013 Robot: Yaskawa Motoman ES165D-100 Controller: DX100 Payload: 100 kg System currently in production regular maintenance performed and documented Currently used carton sizes (external dimensions) (sizes can be changed): 386 x 143 x 110.5 mm Tedpfx Abszi Ay Astsb 382 x 170 x 124 mm 376 x 170 x 210 mm Weight per carton: Max. 5 kg Optional An end-of-line packer from Meurer can also be offered. The buyer is responsible for organizing the dismantling and transport. An inspection of the running system is possible by arrangement.

Condition: like new (used), Year of construction: 2019, operating hours: 253 h, Welding robot KUKA from December 2019, very little used. 253 hrs. Todpsrgqx Usfx Abteb The robot is connected, available for testing, inspection in Lithuania. Industrial robot KUKA KR8 R2100-2 arc HW Working lifting load: 8 kg Maximum reach: 2100 mm Number of axes: 6 Positioning accuracy (ISO9283): +-0.04 mm Fixing: floor Protection class: IP54 Three-axis positioner KUKA KP3-H2H500 Axes: 3 Working load: 500kg (per conductor side) Positioning accuracy (ISO9283): +-0.04 m Distance between discs: 3 200 mm Merkle Hight Pulse 452 rs welding source kit Phases: 3*400V Working range: 20 - 450A Welding voltage: 15 - 36.5 V Protection class: IP23 Applications: MIG/MAG, Pulse ARC, MMA/s Components: torch, cables, wire feeding mechanism, wire reel with bracket. Software: KUKA Office Lite KSS 8.5 offline TBI automatic clamp. Burner cleaning station 3 functions: pniaumo - nozzle cleaning, wire cutting, silicone coating. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 1720 kg Measurements height 2300 mm Tedpsx D Dizofx Abteb Dimensions Machine Length 3990 mm Main Drive Number of axis 6 This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information. Application Types Welding

Condition: new, Year of construction: 2024, warranty duration: 12 months, 6-AXIS WELDING ROBOT WITH TWO 2-AXIS SERVO-DRIVEN POSITIONERS KIBOT R2200 is multi-axis welding robotic system. with arms moving in horizontal plane and robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. The jointed two-link arm covers a 360° area around the robot base without any blind-spots to reach. While the linear vertical axis provides high access equally at any point of the robot’s work-area. The tool center point (TCP) optimizes the robot motion to a minimum reaching the desired position in the work space. The unique kinematics offer unmatched reach and versatility for any welding application. The electrical cabinet (robot controller) has been integrated in the robot base to minimize floor space requirements. Application KIBOT R2200 welding robot has a cylindrical work-area with radius of 2200mm by the two rotational axes and vertical motion of 1200mm by the linear axis. The maximum range of the tool center point is 3000mm. The unique design allows 360° reach around the robot’s base creating multiple work-zones. The three rotational axes for welding torch rotation and inclination offer infinite capabilities of welding all joint types and positions. MOTION RANGE Maximum reach radius A1 + A2: 2200mm Transverse stroke А1: ± 180° Transverse stroke А2: ± 160° Vertical stroke А3: 1200mm Rotation range around A3: ± 360° Range of torch tilting angle: ± 135° Rotation range around А3: ± 360° MAXIMUM SPEED Rotational axis А1 + А2: 90°/s Linear axis А3: 1 m/s Rotational axis А4, А5, А6: 120°/s Max. interpolated speed: 2 m/s ACCURACY Repeatability: ± 0.20mm TWO 2-AXIS SERVO-DRIVEN POSITIONERS - High accuracy and minimal backlash; - Precise synchronization between robot and positioner; -High accuracy and repeatability of positioning in details; Number of axis - 2 Motor type - AC, servo Payload - 500 kg Max. speed of axis 1 & 2 - 60°/sec Tedjvxi Hlspfx Abtjb Nominal torque axis 1 - 1040 Nm Nominal torque axis 2 - 1040 Nm Repeatability of axis 1&2 - +/-0.01° WELDING EQUIPMENT Kemppi A7 450A MIG/MAG PULSE Power-source ROBOTIC TORCH AND COLLISION SENSOR Robotic torch set TRM612W, liquid cooled, 1.6m torch leads, collision sensor, hollow wrist

Condition: new, Year of construction: 2026, Large-scale welding robotic systems High-dynamic robotic, multi-axis automated welding system. KBWELD HDC is a console-type linear-drive system with a robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. KBWELD HDC6 has a wide range of applications - complex, ribbed beams with slopes, panels, boards, ribbed sections; For straight and circular seams, various building elements, machine housings and more. Number of axes (all in interpolation) - 6 Axis type - 3 linear and 3 rotary for torch Motor type - AC, servo synchronous motors Motion principle - Rack and pinion on linear axes, high precision cycloid reducers on rotary axes Longitudinal stroke (along the rail) - on request Transverse stroke - Y axis - 2000 - 4000 mm Vertical stroke - 1500 - 2500 mm Rotation range around Z-axis +/- 360 ° Range of torch tilting angle +/- 90 ° Linear axes speed range 0 – 30 000 mm/min Rotary axes speed range 0–120°/s Positioning accuracy +/-0.3 mm/m Repeatability +/-0.1 mm Supply voltage 3-phase, 380V +/-10%, 50Hz Nominal consumption 3.5 kW PROCESS MANAGEMENT • A library of settings that includes all parameters • Welding speed, power source parameters • Ability to change the welding mode during welding • Arc start delay • Delay of motion at the arc end for the crater filling time • Separate control of arc burning times and cold wire feed in TIG process • Weaving function with frequency and amplitude adjustment • Seam (part) search function with touch sensing with wire , gas nozzle or other sensor • Seam tracking through arc current and weaving motion ▲ WELDING EQUIPMENT OPTIONS: 450A KEMPPI A7 - PULSED MIG/MAG WELDING - Full welding parameters robot control Mains connection voltage 3~ 50/60 Hz 400 V, -15 …+20 % Supply current (maximum) 32 A Supply current (effective) 25 A Fuse (delayed) 35 A No-load voltage (peak) U0 = 80 V – 98 V Open circuit voltage (average) 85 V – 103 V Operating temperature rang -20…+40 °C Degree of protection IP23S Efficiency (100 % duty cycle) 87 % Power factor at max. current 0.88 OR ▲ TANDEM (TWIN-WIRE) WELDING MIG/MAG EQUIPMENT 2 x 450A KEMPPI A7 - Full robot control ▲ ROBOTIC PERIPHERALS OPTION: 1-axis Servo-positioners - payload on request from 500 to 6000kg 2-axis Servo-positioners - payload on request from 250 to 2000kg DESCRIPTION KBSPOS500 Payload 500 kg Number of axes 1 Type of motor AC, servo Max Torque 860 Nm Max Load inertia 100 kgm2 Max Speed 70°/sec Flange diameter 400 mm DESCRIPTION 2-axis Servo-positioner KBS2AxPos 500 Number of axes 2 Type of motor AC, servo Payload 500 kg Max Torque Axis 1 1700 Nm Max Load inertia Axis 1 400 kgm2 Max Speed Axis 1 30°/sec Max Torque Axis 2 860 Nm Max Load inertia Axis 1 100 kgm2 Tedpoh Imyajfx Abtsb Max Speed Axis 1 70°/sec Flange diameter 400 mm ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 10 days

Condition: new, Year of construction: 2026, functionality: fully functional, arm reach: 955 mm, type of input current: AC, total height: 955 mm, total width: 955 mm, total length: 955 mm, load capacity: 5 kg, control cabinet length: 5 mm, overall weight: 35 kg, input voltage: 230 V, type of cooling: air, protection type (IP code): IP62, FAIRINO COBOTS – MODERN AUTOMATION FOR YOUR BUSINESS We offer advanced FAIRINO collaborative robots (cobots) designed to increase productivity, improve quality, and enhance safety in manufacturing processes. Thanks to their intuitive operation, fast deployment, and excellent price-to-performance ratio, FAIRINO cobots are the ideal automation solution for small, medium-sized, and large enterprises. Why Choose FAIRINO Cobots? ✅ Safe human-robot collaboration without the need for expensive and complex safety fencing. ✅ Easy programming through hand-guiding, graphical programming, and a user-friendly interface. ✅ Fast return on investment through process automation and 24/7 operation capability. ✅ High precision and excellent repeatability for demanding industrial applications. ✅ Compact design that allows operation even in limited production spaces. ✅ Easy integration with vision systems, grippers, CNC machines, AGVs, and other automation equipment. Available Models The FAIRINO FR Series includes collaborative robots with payload capacities ranging from 3 kg to 30 kg, allowing the perfect solution for virtually any industrial application. Available models: • FR3 • FR5 • FR10 • FR16 • FR20 • FR30 Typical Applications • CNC machine tending • Welding and spot welding • Assembly and fastening operations • Packaging and palletizing • Quality inspection • Pick-and-place applications • Dispensing and gluing • Sorting and order fulfillment • Logistics and material handling automation Benefits for Your Business FAIRINO cobots help reduce production costs, increase operational efficiency, and improve process consistency and product quality. Their flexibility allows them to be quickly redeployed between workstations and adapted to new tasks, making them an ideal solution for modern Industry 4.0 manufacturing environments. Tjdpjzaz Eyefx Abteb Warranty and Support ✔ 12-month distributor warranty. ✔ Professional technical support and service coverage throughout Europe. ✔ Assistance with implementation, configuration, and integration into existing production processes. Contact us today to find the right FAIRINO cobot for your application and receive a customized automation solution tailored to your business needs.

Condition: used, Year of construction: 2011, overall weight: 1,622 kg, load capacity: 240 kg, arm reach: 2,700 mm, This is a used, tested welding robot system comprising a KUKA KR 240-2 2000 and a KRC2 ed05 controller from 2011, combined with a welding unit from SKS Welding Systems. The system is designed for industrial welding and automation applications and is typically used for arc welding, heavy-duty assembly operations, and combined handling/welding tasks. The robot has a payload capacity of 240 kg and a reach of 2700 mm, making it suitable for large-scale workpieces. The system is equipped with an SKS LSQ 4 welding power source featuring wire feeder, welding torch, and a complete hose package. Tedpfx Asy Nfl Debtjb

Condition: like new (used), Fronius used -TPS4000CMT / TransPuls Synergic 4000 CMT R Tsdpfx Aepa N Aaobtob - cooling unit FK4000-RFC (4,045,837,632) water cooled - RCU5000i remote control Univ.SD (4,046,098) - VR7000 CMT R (4,045,963,000 - Angle encoder CMT (43,0001,1219) with robot hose package kPL Robacta - Interface Interbus Rugged Line(4,045,885) (optional Profibus and Profinet connections available)

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam Tsdecrtliepfx Abtob start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm warranty: 6 month for material

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, arm reach: 3,000 mm, type of input current: three-phase, load capacity: 500 kg, control cabinet width: 600 mm, control cabinet height: 2,000 mm, overall weight: 300 kg, input voltage: 220 V, controller manufacturer: Tawers, input current: 22 A, pivoting range: 270 °, teach pendant manufacturer: Panasonic, Equipment: documentation/manual, type plate available, Panasonic Welding Robot TA-199WG/PA-C Frame, complete with controller, software, and full set of control cables; Tjdpfx Aeyzn D Hsbtob Robot Controller GIII Modules for rotator and bearing unit Rotator Pana Dice 500 and rotator, Pana Dice 500 (can operate simultaneously on the machine) Wire feeder Power source for MIG/MAG and TIG welding, Panasonic Tawers Pulse Anthropomorphic manipulator Water-cooled welding torch with anti-collision function Water chiller Tawers TA-1900 WG III Manipulator Number of controllable axes: up to 12 Maximum welding speed - 180 m/min linear Maximum working area: 1895/3790 mm Panasonic Pulse Power Source Welding methods - MIG/MAG and TIG Duty cycle 350A/80% Panasonic Controller 7-inch color display Windows operating system Panasonic Pana Dice 500 Rotator Max load - 500 kg Panasonic Pana Dice 1000 Rotator Max load - 1000 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kawasaki RA006L Robot with E-Controller Year of manufacture: 2022 Control unit: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consists of: • Robot kinematics • Controller (10 m cable to robot kinematics) • Teach pendant (10 m cable to controller) Interfaces: • RS232 • 2x Ethernet (individually configurable) • 2x USB • 32 digital inputs / 32 digital outputs (freely assignable) Todoympvtopfx Abtsb • User interface on robot upper arm R-Series 12E / 8A / 2x air (10 mm) (The signals from the user interface are available in addition to the 32 inputs and 32 outputs.)

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Model: IRB4600 Tedpfowrcn Uox Abteb Year of manufacture: 2017 System consists of: ABB robot IRB4600 Control cabinet Handheld control unit Laser cleaning unit Clean Laser type intelliScan30 Extraction system TEKA 11526ä

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control system V 6, Tjdpfx Abjizwv Njtsb stand base for vertical arrangement, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure amplifier 1 tilting and rotating table WPK 5000, load capacity 500 kg, 1 start pre-selection, 1 control unit for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor System will be completely overhauled and serviced before delivery. A second station with another identical tilting and rotating table is possible.

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) Tedpfx Aboh Ad E Hjteb 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free. Tsdpfx Ajrfucqebtsb

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 5 h, functionality: fully functional, overall weight: 150 kg, load capacity: 6 kg, arm reach: 1,445 mm, repeat accuracy: 0.06 mm, Industrial welding robot with a payload of 6 kg and a reach of 1445 mm. Tsdpoqcunaofx Abtsb The robot served as a demonstration exhibit.

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L from the year 2019 Tjdpfxomu Agps Abtsb Power source - Fronius TPS 400i from the year 2019 Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation.

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. The welding robot is being offered complete with enclosure and is available immediately. (Technical data can be found in the photos) Type: Reis RV 20-16 Control and operator unit PHG 10-2 The system is located at our facility in Hungary / 2699 Szügy and will be sold from site. (Disassembly possible after consultation with buyer) We would be happy to welcome you for an inspection and demonstration of the system (by appointment). Todpfswra S Dex Abtob The system is sold with an unperforated welding table only!!!! (see last photo) The perforated version is not included in the sale.

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Tedpfx Aow U Ezzjbteb Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 35 kg, empty load weight: 570 kg, Equipment: documentation/manual, Welding robot with control cabinet & welding unit! TECHNICAL DETAILS Maximum payload: 35 kg MACHINE DETAILS Own weight: 570 kg EQUIPMENT Control cabinet Welding unit Tjdoxnw E Repfx Abtob