Used Wet Dry Vacuum Cleaner for sale (6,519)

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Hjdpoygvniefx Ag Nei

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Hedpfx Ajx R D Efjg Noi Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1988, Manufacturer : Comber Model: Pharmadry PH 100 Year : 1988 Type : vacuum dryer   Maximum temperature: 99°C Material: 304 and 316 stainless steel (in contact with product). Classification: Atex EEx IIB T4   Main tank diameter : ø 500 mm Main tank depth: 700 mm Power: 4 HP Filter Pressurised receiver tank Tubular heat exchanger   Gaskets: new Hodpfx Aox R Avijg Nei Paint: new Mechanical seal: As is, good condition

Condition: used, // Sold as is or reconditioned // Vacuum paddle dryer mixer Used for products such as powders/powdery substances. 316 stainless steel Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Loading via 400 diameter Discharge 350 diameter with guillotine valves Hjdpfox Rz Spex Ag Noi ADF 15 kW motor Self-cleaning filter

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Hjdpfx Asya Ik Ajg Nei Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: used, WSA Lignomat vacuum dryer Hodpfxoxxpdtj Ag Noi Control unit: Bollmann Tromatic 910GH Depth approx. 10 m

Year of construction: 2001, condition: excellent (used), RICE REDUCTION!!! Instead of 1.150 EUR only 950 EUR!!! Hsdpfepgultex Ag Nsi Dryer with material conveyor Moretto Type SHD25 power 2940 Watt Moretto material conveyor Type T 2L Vacuum pump Moretto Type VI T2

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers Hsdpfx Aev Si Szeg Noi 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 2021, Binder VDL 115 (2021) – Laboratory Vacuum Chamber, Perfect Condition, Demo Unit Hsdpfxjvq I Tnj Ag Nji Model: Binder VDL 115 Year of manufacture: 2021 Condition: As new – showroom specimen, post-factory testing Capacity: 115 liters Power supply: 230 V Availability: Immediate Warranty: Yes (start-up warranty) VAT Invoice: Yes Location: Grabina 92-701, Poland Optional: Transport available — Description: We offer for sale a Binder VDL 115 vacuum chamber designed for drying organic solvents and flammable substances under vacuum conditions. This is a VDL safety series model meeting ATEX requirements, intended for operation in explosion hazard zones (class 3). The unit was used solely for demonstration purposes – it is in perfect visual and technical condition and comes with complete documentation. — Key features: • Temperature range: from +9°C above ambient to +200°C • Usable capacity: 115 liters • Interior made of stainless steel (1.4571) – chemically resistant and easy to clean • Controlled, safe vacuum with adjustable level • ATEX 2014/34/EU compliant, safety class 3 • Control panel with LCD display, programmable parameter regulation • Standard equipment: 2 aluminum shelves + inert gas valve — Applications: • Pharmaceutical and chemical industry • R&D laboratories • Drying of solvents, non-reactive materials, and temperature-sensitive samples • Production of electronic and precision components — Why it’s worth considering: • The chamber is in immaculate, as-new condition • No signs of wear, full technical documentation included • A perfect alternative to a new unit – no lead time • Attractive price, possibility for on-site testing or remote demonstration

Condition: ready for operation (used), Technical characteristics tank 1000 mm tank length 4600 mm trays dimension 700 x 4000 mm height 700 mm max closed length 4700 mm electric boiler programming example: wood thickness 45/60 mm initial humidity 35/45% plate temperature 45/60 C ° total time 90 H (manufacturer data cannot be committed) Power and Motors Hsdpst Hzvwefx Ag Nsi Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 4600 mm Width: 1000 mm Height: 1100 mm Weight: 1500 Kg

Condition: ready for operation (used), Technical characteristics Hodpfx Agst Hzvqe Nsi Total volume 1,6m3 Length 4800 mm Width 700 mm Loading height 500 mm Brand new membrane Cycle and temperature adjustable on the control panel according to the species and thickness of the wood Brand new heating resistance and vacuum pump 6 heating plates Ideal for carpentry and fast drying (-90h) of small volumes of lumber Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Volume: 12 m3 Useful dimensions : Length 7400 mm Width 1500 mm Height : 1350 mm External dimensions: 8400 mm x 2700 mm Hjdpjt Hzvkjfx Ag Nji 28 circulation heating plates (Dimensions 6400 mm x 700 mm) Completely revised New vacuum pump 5,5 kW (TRAVIANNI) Power and Motors Overall dimensions

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: GSVW-3080-1250-1-F, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. Hsdpfx Agswrb Nko Nji - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price.

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Hsdpsitcu Ejfx Ag Noi Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: excellent (used), I sell the pump FEZER 016-118 94213 Hodjud Ryrspfx Ag Nei - Pump in bdb condition. - Capacity 16m3/H

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety Hodpfx Ajvg U Dxog Nei

Condition: new, fuel type: electric, Year of construction: 2025, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. Hedpfx Ajq Igiiog Nei 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 512.3 kW (696.53 HP), type of cooling: air, overall weight: 1,386 kg, total width: 2,400 mm, total length: 6,800 mm, total height: 1,570 mm, warranty duration: 6 months, Dry-cooler THERMOKEY GH2390.BZ 2/03 V Q1EEpF(EC)S 512.3 KW Hodpfx Aexyw Dqeg Noi Cooling capacity: 512.3 kW (44/37 — +28C) Year of manufacture: 2022 Fluid: Glycol + Water Fluid flow: 67,4 m³/h Air flow: 152415 m³/h Number of fans: 6 pcs. Fan Diameter: 900 mm Volume: 248 dm³ External surface: 1329 m2 Dimensions: 6.8 x 2.4 x 1.57 m. Weight: 1386 kg.

Condition: good (used), Year of construction: 2006, functionality: fully functional, cooling capacity: 945.4 kW (1,285.38 HP), type of cooling: air, overall weight: 2,600 kg, total width: 2,230 mm, total length: 8,190 mm, total height: 2,500 mm, warranty duration: 6 months, Dry-cooler ALFA LAVAL S.p.a. VDDS906CD196 945.4/779.4 KW Cooling capacity: 945.4 / 779.4 kW / 268.8/221.6 tons (40/35 — +25C) Year of manufacture: 2006 Fluid: Glycol + Water Fluid flow: 164.4 / 135.5 m³/h Air flow: 251913 / 195147 m³/h Number of fans: 12 pcs. Hjdsw Sr R Djpfx Ag Noi Fan Diameter: 910 mm Volume: 336.9 dm3 External surface: 3868.2 m2 Dimensions: 8.19 x 2.23 x 2.5 m. Weight: 2600 kg.

Condition: ready for operation (used), functionality: fully functional, total length: 1,100 mm, total width: 1,300 mm, total height: 1,600 mm, input voltage: 380 V, load capacity: 500 kg, empty load weight: 550 kg, Equipment: documentation/manual, Chamber washing system with rotary rack. Max. workpiece weight 500 kg, basket size 74x74 cm, max. workpiece height 66 cm. Includes loading trolley and cleaning powder. Operating manual available. Hedpfoymggvox Ag Noi

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Hodpfxeul T Ice Ag Nei Length: 300 Width: 180 Height: 200 Electric power: 7.5 kW

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Hodjtwn E Ujpfx Ag Nji Square max 120 mm X 120 mm

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Hodpfxeym U Syj Ag Nsi Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Hodpfxsym U Ino Ag Nji Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Year of construction: 2015, condition: ready for operation (used), Heating surface: 3200x1480mm, 2x heating plate dimensions: 2120x1480/1060x1480mm, max. temperature: 180°C, connected load: 17.8kW, length: 3300mm, width: 1650mm, height: 1100mm, weight: 887kg. Elements: insulated lid, lid handle, quick-release clamps, industrial rollers with stoppers, electrical switch box/control panel, U-shaped support rails, signal light tower, POWER signal light, on/off timer switch, digital timer, temperature control unit left heating plate, temperature control unit right heating plate, on/off switch left heating plate, on/off switch right heating plate, RESET push button, EMERGENCY STOP switch, signal light circuit breaker (BREAKER), main switch. With documentation. An on-site inspection is possible. Hsdpfx Ajw S Tx Asg Nei