Used Widoberg for sale (61)

Condition: good (used), Year of construction: 1999, Built in 1999 400 V; 50Hz 1.5 kW Linishing belt 100 x 1500 Belt speed 25m / sec. Gkodpfxsba Hz Ue Ah Def Weight approx. 50 kg

Condition: new, Bowl vibrator without pneum. separating ramp - total volume approx. 15 l - inner diameter bowl approx. 410 mm - max. parts size 90 mm - PU-layer bottom 10 mm - PU-layer side wall 8 mm - motor 0,17 kW - motor speed 1500 rpm - total height 620 mm - total weight 42 kg Gkodjd Ai Enopfx Ah Dsf - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm

Condition: excellent (used), Year of construction: 2004, Doublesided manual polishing stand make METABO, type 72730 with 5.5 kW, 1500 rpm, incl. two polishing covers. Machine was overhauled, blasted, repainted, new bearings for motor and polishing shaft, new v-belts. Gjdjfw Uzxjpfx Ah Djkf

Condition: new, Bowl vibrator incl. pneum. separating ramp and noise isolation cover - total volume approx. 720 l - inner diameter bowl approx. 1460 mm - max. parts size 320 mm - PU-layer bottom 20 mm - PU-layer side wall 18 mm - motor 4 kW - motor speed 1500 rpm - total height 1300 mm - total weight 1270 kg - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm Gkjdpsd Ai D Rofx Ah Dof

Condition: good (used), Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture Gjdozmbhopfx Ah Djkf

Condition: new, Year of construction: 2012, hydraulic linishing or polishing unit for hollow ware like cooking pots Gsdpfx Aobdnuash Djkf

Condition: new, - without sideward drain - total volume of bowl 53 l - working volume of bowl 40 l - dimension approx. 790 x 415 x 670 mm (h) - dim. of working trough approx. 590 x 290 x 290 mm (h) - motor 0,55 kW - engine (rpm) 1500 - bottom P.U. layer of the trough 10 mm - side wall P.U. layer of the trough 8 mm - weight 80 kg Gkodpfxjd I Dnye Ah Def - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm)

Condition: new, - incl. sideward drain - total volume of bowl 240 l - dimension approx. 1350 x 950 x 925 mm (h) Gkjdpfx Ahod Nnuis Dof - dim. of working trough approx. 1235 x 480 x 460 mm (h) - motor 1,5 kW - 380 V / 50 Hz - engine (rpm) 1500 - bottom P.U. layer of the trough 15 mm - side wall P.U. layer of the trough 12 mm - weight 500 kg - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm) - as option with noise isolation cover - as option with seperating walls

Condition: new, Bowl vibrator incl. pneum. separating ramp - total volume approx. 420 l - diameter bowl approx. 1355 mm - max. parts size 240 mm - PU-layer bottom 15 mm - PU-layer side wall 15 mm - motor 1,1 kW - motor speed 1500 rpm - total height approx. 1100 mm - total weight 780 kg Godpfx Asd Nnr Dsh Dokf - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm

Condition: new, - incl. sideward drain - total volume of bowl 380 l - dimension approx. 1350 x 930 x 950 mm (h) - dim. of working trough approx. 1250 x 520 x 520 mm (h) Gedpfx Ahed Nnupo Dekf - motor 1,5 kW - 380 V / 50 Hz - engine (rpm) 1500 - bottom P.U. layer of the trough 16 mm - side wall P.U. layer of the trough 12 mm - weight 750 kg - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm) - as option with noise isolation cover - as option with seperating walls

Condition: new, - incl. sideward drain - total volume of bowl 53 l Godpfx Ahjd I Dn Ne Djkf - working volume of bowl 40 l - dimension approx. 790 x 415 x 670 mm (h) - dim. of working trough approx. 590 x 290 x 290 mm (h) - motor 0,55 kW - engine (rpm) 1500 - bottom P.U. layer of the trough 10 mm - side wall P.U. layer of the trough 8 mm - weight 80 kg - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm)

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. Gedjt Rrkspfx Ah Dskf - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, The tube linishing / satin finishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Gksdsd Hfnbjpfx Ah Djf Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system Gjdsd Hbp Ejpfx Ah Dskf - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, MSP – Manual Hand Spray Systems Gkodpfx Aeh E Szmjh Dof The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants.

Condition: new, Year of construction: 2023, Pipe drilling / slant drilling machine automatic drilling machine TDM100 2D AT - automaticwith two opposite drilling units - minimum quantity lubrication - manual material clamping - automatic feed and automatic pipe turning - max. pipe length 3.000mm - positioning accuracy +/- 0,2mm - power drilling unit 2 x 2,2 kW - manual insertion and removal of material - drilling heads +/- 50° swiveling - manual 360 degree swiveling - motor speed 295 - 2950 rpm - operation via touch panel - 100 positions programmable Gedpslgzytefx Ah Dskf - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door Gksdpfj T D R Djx Ah Dof - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, FC120 ZK flat finishing machines were developed thinking in simplicity of operation whenever flat bars, rectangular tubes or flat elements need to be belt finished or polished. Gedpfod Ix I Aex Ah Dskf These machine enable the work up to 120 mm width with a range of 3 possible combinations of belt heads and brushes. FC120 ZK combines the abrasive belt head (Z) with an abrasive brush (K). Abrasive belt head: Finishing and removing imperfections of square of rectangular tubes, flat bars or any flat component. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube - also flat bars finishing. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. NS Máquinas can supply different conveyor solutions in order to grind small items. Technical Details - FC120 ZK Working capacity (Ø mm) 120x120 No. belt stations (Z) 1-2 No. brush stations (K) 0-1 Abrasive belt dimensions (mm) 120x1850 Abrasive brush dimensions (mm) 120xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 12 Abrasive belts motor per head (kW) 3 Abrasive brush motor per head (kW) 2.2 Feeding motor (kW) 0.25 Total power (kW) 5.5 (ZK) Consumption (A) 12 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1450x800x1800 (ZK) Weight (kg) 500 (ZK)

Condition: good (used), internal grinding machine for pots / holloware up to Ø 400 x 600 mm Gedjbdfr Tjpfx Ah Dskf hydraulic movement of grinding heads complete with vacuum pump and basic vacuum fixture incl. hydraulic unit and control cabinet

Condition: good (used), Indexing table HAU RK 4-800, 4 work piece spindles, max. 3 polishing units, more details and inspection on request. Pictuer shows RK 6/800 Gkodpfxjv Na Sj Ah Djf

Condition: ready for operation (used), - double grinding and plishing machine Gjdpfx Ahsdz Uzbj Dskf - 1,5 kW - speed 1420 U/min - working hight is 600 mm - conical shaft

Condition: good (used), Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request. Gksdpfx Ahe R Ecgo Dsf

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. Gkjdpfjpugwiex Ah Dof The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, centerless for pipes and rods, used, with pneumatic belt tensioning, year of manufacture 1999, in very good condition Gkjdpsqk Uyasfx Ah Def

Condition: excellent (used), functionality: fully functional, grinding width: 75 mm, power: 1.5 kW (2.04 HP), input current: 16 A, Centerless belt grinder for round tubes, GRIT GX752H + GCX + GXW Godjucq Dnspfx Ah Djkf - including tube support - Incl. coolant container for wet grinding - including sanding area with surface belt - mobile, on a base with wheels