Used Windows Center for sale (22,044)

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, Posmill C1050 3-Axis Machining Center (2010) Manufacturer: POSmill Model: C1050 3-Axis Machining Center (2010) Year of manufacture: 2010 Machine type: 3-axis machining center Condition: Powered on, ready for immediate use Operating hours: approx. 29,800 h Spindle hours: approx. 9,000 h CNC Control: iTNC 530 Spindle speed: 10,000 rpm Tool magazine: 30 slots X-axis (mm): 1,050 Y-axis (mm): 530 Z-axis (mm): 630 Distance spindle/table (mm): 85-715 Accessories: Itjdpex Iv Hvjfx Aansr Documentation Chip conveyor Coolant system 30-position tool changer Linear scales on all axes X / Y / Z 3D probe Electronic handwheel Available immediately.

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Itsdpfox Hy R Nex Aansr Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Iodpfxsx Iikbe Aanjtr Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm Itodjxwp Ebepfx Aansr spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, two turrets, dual Y-axes, spindle bore 66 mm, sub spindle, parts catcher with conveyor, short bar loader, tool measuring arm, Hainbuch chuck, immediately available. Itedpjx Ic Ndjfx Aaner

Condition: excellent (used), Year of construction: 2004, operating hours: 7,987 h, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: 160 is-MB, table width: 500 mm, table length: 500 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,979 h, spindle motor power: 22,000 W, spindle nose: SK 40, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, high-speed machining center of Japanese construction with continuous 5-axis capability, complete with: remote handwheel, high-pressure coolant through spindle, chip conveyor, random tool changer, laser tool measurement system, wireless workpiece probe RENISHAW MP 10, FANUC high-speed package, network interface, serial interface, memory card Itedpfxox H Tx He Aanjr

Condition: used, Year of construction: 2013, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, WORKING RANGE -CUBIC- .. X-axis travel: 1270 mm .. Y-axis travel: 660 mm .. Z-axis travel: 635 mm SPINDLE / HEAD .. spindle revolutions (max): 7500 /min BASIC FUNCTIONS .. number of spindles: 1 .. number of turrets: 0 .. live positions: yes .. number of c-axes: 0 .. number of y-axes: 1 .. number of b-axes: 0 ATTACHMENTS .. chip conveyor: yes WORKING RANGE TURNING .. swing diameter (max): 635 mm .. worpiece length max.: 1372 mm .. workpiece weight max.: 1814 kg MAIN SPINDLE .. spindle revolutions (min): 0.001 /min .. spindle revolutions (max): 7500 /min X/Z SLIDE .. Z-axis travel: 635 mm .. X-axis travel: 1270 mm .. Y-axis travel: 660 mm Ijdpfex H Iuijx Aanjtr TOOL MAGAZINE .. tool diameter max.: 178 mm .. tool length max.: 406 mm .. tool weight max.: 13.6 kg

Condition: used, Year of construction: 2007, Double-spindle machining center in 5-axis design (on both sides) Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle distance 600 mm Rapid traverse 45 m/min Itodpfotgu Ixex Aanjr Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions HSK 63 tool holder CNC control Siemens 840D 1 x tool breakage control 2 x clamping bridge support H75 mm 2 x clamping bridges 5th axis Knoll coolant system, 70 bar 1 x chip conveyor KB1000 1 x drill head indexing 2 x tool planning system control 2 x A/U axis torsion compensation upgrade kit

Condition: used, Year of construction: 2008, x-travel 2500 mm y-travel 2500 mm z-travel 1700 mm control Siemens Sinumerik 840 D max. workpiece weight 6000 kg spindle diameter 130 mm quill stroke 700 mm tool taper ISO 50 DIN 69871 - AD max. torque at the spindle 1847 Nm total power requirement 65 kW weight of the machine ca. 45 t dimensions of the machine ca. 10,9 x 9,3 x 5,7 m Work table -Clamping surface 2500 x 2000 mm -Table height above floor 800 mm Iedpsw N S E Njfx Aanjtr Feed speed -x-axis 0.5 to 10000 mm/min -y-axis 0.5 to 10000 mm/min -Z-axis 0.5 to 10,000 mm/min -Rapid traverse (x/y/z) 25 / 25 / 25 m/min -Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm -Gear stage 1: 6 to 1004 rpm -Gear stage 2: 950 to 4000 rpm Equipment/accessories: -Approx. 30 SK 50 tool holders -1 measuring probe -Coolant system/paper belt filter & chip conveyor -Cooler -Oil mist extraction -Fixators -Technical documentation

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer is an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - EVOLUTION diamond formatting cutter set Itjdpfxou Tid Hs Aansr - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen 21.5", 16:9 - Workpiece length measurement LASER - Milling unit 7830 - 7887 tool changer 6-position magazine pick-up - ECO vacuum system - Air conditioning unit for switch cabinet cooling - Tool changer 7874 - Angular gear 7869 - Adapter for Clamex milling cutters - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Manual control unit - Tool set - EVOLUTION for XL drilling head 7885 - new exhibition machine -

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: S/N 1193, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, rotary table diameter: 600 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 35,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Full working, perfect condition machine for sale! * 5-axis simultaneous * HEIDENHAIN iTNC 530 controller * Spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW - Spindle -> 4,200 operating hours (almost new!) - Axes -> 16,800 operating hours * HSK-A 63 tool magazine with 34 tool stations * Additional TM99 side tool magazine with 99 tool stations * HEIDENHAIN remote controller * KinematicOpt * DCM Collision (HEIDENHAIN) * Job InfraRed touch probe with HEIDENHAIN software * High-pressure through-spindle coolant system (38 bar) * Air blast through spindle * Chamber mist extractor * Tool cleaning system * Chip conveyor * Oil skimmer for coolant tank * Coolant gun * Coolant washdown for chamber * Remote machine diagnostics (via network) * Voltage 400 V, 50 Hz, TN-S Itedpfx Aaexpf Hfjner Machine is located in production facility in Mielec 39-300, Poland, connected and available for trials. Buyers - Welcome!

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Spindle hours approx. 25,600 Operating hours approx. 44,900 Itodpfxex Him Hj Aaner

Condition: refurbished (used), Year of construction: 2003, operating hours: 47,000 h, functionality: fully functional, Manufacturer: Deckel Maho / DMG MORI Model: DMU 70 eVolution (extensively overhauled; new guideways, new motor spindle, new hoses, etc.) Year of manufacture: 2003 Serial number: 15035707964 Operating hours (as of 08/2025): Power-on hours: 100,115 h Cycle hours: 48,302 h Availability: from January 2026 Equipment and Accessories - CNC control: Heidenhain MillPlus V530 / 00m - Renishaw MP10 infrared probe - Motor spindle SK40, 18,000 rpm, operating mode 4 - Quick Set software for kinematic compensation - Blum laser system for tool measurement and tool breakage control - Tool magazine with 92 positions - Tebaron extraction/filter unit - ICS (internal coolant supply) through the spindle, 80 bar - Chip conveyor - Photos and videos available via MONTRASIO WhatsApp Business Maintenance, Servicing, and Upgrades (all carried out in 2025) - Annual maintenance by Maschinen- und Industrieservice ULRICH - Ongoing overhaul of individual components as part of normal wear - Y-card replaced - Y power module exchanged (new) - Mixer in the coolant system replaced with a brand-new mixer - 4-DO card A5-09A71 replaced - Complete overhaul of the motor spindle - GKT Z-axis completely overhauled Itedjx H S D Uopfx Aanor - Guideways of all axes overhauled, including Y and Z-axis (brand-new guideways) - Coolant pump replaced by new pump - Connector on the high-pressure pump renewed (new) - Buffer battery replaced (new battery) - Lubrication hoses renewed (new hoses) - General maintenance performed by DMG MORI Direct Service in 2024 and 2025 (last service in 2025) - Monitor replaced (new) - Oil skimmer replaced Known Issues: Only age-related, visual or optical signs of use Application / History The machine will remain powered up and in production until calendar week 02/2026 Delivery calendar week 04/2026 Previously used at LIEBHERR Aerospace Toolmaking machine – meticulously maintained high-precision machine with documented maintenance history, complete logbook, structured spare parts management, and regular spindle inspections (every six months) Reason for sale: Acquisition of a brand-new GROB 550 5-axis machining center

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout, from Vocational School Technical Data: Ijdpfx Aex H S D Ieanstr >> Year of manufacture: 1992; Machine No.: 92 160 3271 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting capability: metric, inch, module, and diametral pitch threads >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Switchable spindle brake >> Dimensions: 1.6 m (L), 1.25 m (H), 0.7 m (D) Accessories and Features: >> 3-axis digital readout by K&C incl. operating manual Functions: mm/inch switching, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet system with NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck (clamping jaws) with 1 set of jaws >> Quick-change system with 4 toolholders >> Bed stop >> Electronic spindle guard >> Rear cover >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and enables the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see for yourself its excellent condition.

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: Itsdow Rf Tiopfx Aaner - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: new, - Edition Partnership - With our TF 100 2.0 "Partnership Edition" we offer CNC technology for the highest demands. And at a sensational price. Drilling, grooving, milling Unique in operation and in the "Partnership Edition" even more so in terms of features: The TF 100 2.0, specially developed for furniture and interior TF 100 2.0, specially developed for furniture and interior than 5 m² production area, it can perform drilling 5 levels of the workpiece, groove sawing work and also milling work. The machine impresses with its extremely high processing speed with maximum precision Itedpsu Tiwvefx Aanor and ease of operation. The standard pre-equipment for angular gears, the optional the optional CLAMEX and lock case milling cutters can be can be retrofitted easily and at any time. The TF 100 2.0 "Partnership Edition" is completely manufactured in in our large factory in Rimini, the headquarters of Masterwood, and is 100% "Made in Italy". ----- Technical data ----- Max. workpiece length X: unlimited, max. workpiece length Y: 1,000 mm, max. tool thickness Z: 60 mm, Vertical spindles X - direction: 5 pieces, Vertical spindles Y - direction: 5 pieces, Horizontal double drilling spindles X - direction: 2 + 2 pieces, Horizontal double drilling spindles Y - direction: 1 + 1 piece, Units: 16 drill head, Drilling spindle speed: 4,000 rpm, Distance between drilling spindles: 32 mm, Motor power: 1.7 kW, Grooving saw: X - direction, Saw blade Ø: 125 mm, Extraction connection Ø: 150 mm, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 1,80,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Travels 1500X1100X600 mm 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) CNC HEIDENHAIN iTNC 530 Remote electronic handwheel Chip conveyor Itjdpex H Iylsfx Aaner

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm Itodpfx Aex Himtjanor -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. The machine/system does not include product-specific tools/fixtures or grippers (robot).

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 61 kVA, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 4,000 kg, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 500 mm, table length: 630 mm, table load: 4,000 kg, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 19,500 h, number of slots in tool magazine: 120, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Iedpfxorxrkle Aanstr Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: Iodpfjx H Szyex Aanetr - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 Itsdpfx Aaovu E R Ssnor quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: excellent (used), Year of construction: 2005, operating hours: 64,000 h, functionality: fully functional, turning length: 4,500 mm, WFL M60 x 4500 Turning, Milling and Drilling Center with 5 Axes Manufacturer: WFL MILLTURN Model: M60 x 4500 Location: Europe Year of manufacture: 2005 Turning length: 4,500 mm For all technical details of the machine, please refer to the attached technical documentation and photos. Below is a summary of the key specifications: Lubrication and Cooling Systems Central lubrication system Tank capacity: 6 l Oil type: ISO VG 68 Delivery rate: 0.5 l/min Max. pressure: 27 bar Minimum Quantity Lubrication (MQL) Tank capacity: 6 l Oil type: Klübersynth GH 6–100 Delivery rate: 0.5 l/min Max. pressure: 27 bar Pneumatic System Air consumption: approx. 200 l/min Operating pressure: 6 bar Working Area Nominal length (turning length): 4,500 mm Swing diameter over bed (linear guide X-axis): 690 mm Swing diameter over cross slide: 610 mm Swing diameter over telescopic covers: 650 – 730 mm Swing diameter over steady rest: 530 mm Spindle center height from floor: 1,193 mm Main Spindle Spindle mount: DIN 55026, Type A, Size 11 Front bearing: Ø 160 mm Rear bearing: Ø 150 mm Spindle bore: Ø 115 mm Draw tube passage: dependent on chuck type used Main Drive Motor power (100% duty cycle): 40 kW Spindle torque (gear 1 / 2): 1,830 / 458 Nm Total speed range: 8 – 3,300 rpm Gear 1: 8 – 825 rpm Gear 2: 33 – 3,300 rpm Itjdpfx Asx H Awfeanjr Upper Slide (X/Z) Feed force (Z / X): 2,000 daN Ball screw drives (Z / X): 63 × 20 / 63 × 10 mm Rapid traverse (Z / X): 20 / 15 m/min Travel Z-axis: 4,650 mm Travel X-axis: 700 mm (+670 / −30) Milling and Drilling Unit Max. spindle power: 25 kW Max. spindle torque: 300 Nm Front spindle diameter: 100 mm Speed range: 10 – 4,000 rpm Travel Y-axis: 300 mm (+175 / −125) Rapid traverse Y-axis: 12.5 m/min Feed force Y-axis: 1,500 daN Ball screw drive Y: 40 × 5 mm B-axis torque: 1,200 Nm B-axis swivel range: 200° (−110° / +90°) Tool holder: SANDVIK Capto C8 C-Axis Max. speed: 25 rpm Max. torque: 1,500 Nm Smallest programmable increment: 0.001° Clamping torque (disk brake): 4,000 Nm This offer is non-binding and subject to prior sale. We are pleased to answer any questions, provide a more detailed specification of the equipment, or coordinate further details (e.g., clamping devices, tool package, commissioning, and training).

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: -> 60 positions Iedex Hilvopfx Aanotr This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: used, Year of construction: 2010, longitudinal traverse (z-axis) 6870 mm cross movement. (x-axis) 920 mm centre distance 6500 mm swing diameter over slide rest 900 mm Control Siemens Sinumerik 840D tool taper CAPTO C8 7352 mm max. workpiece weight 9000 kg tools in tool magazin 72 total power requirement 145 kW weight of the machine ca. 47 t dimensions of the machine ca. 11 x 3,2 x 3,5 m Rotary spindle -Spindle diameter - 320 mm -Spindle bore - 245 mm Main drive: -Max. spindle speed - 1600 rpm -Max. torque at the spindle - 4472 Nm C-axis servo-controlled main spindle: -Max. speed - 20 rpm -Max. torque at the spindle - 3000 Nm -Holding torque of the disc brake - 6000 Nm Tailstock: -Quill diameter - 180 mm -Quill stroke - 200 mm -Quill force (adjustable) - 5400 to 40000 N Itedpfx Aajxzuvtener Tool holder: -AC drive power - 30 kW -Max. spindle speed - 6000 rpm -Max. torque at the spindle - 315 Nm -Travel perpendicular to the X/Z plane (y-axis) - 500 mm [-200/+300]mm -Milling spindle diameter in the front bearing - 100 mm Equipment/accessories: -with internal coolant supply -chip conveyor -paper belt filter system -boring bar with device -measuring equipment -clamping sleeves -tool holders -spare parts -technical documentation

Condition: used, Year of construction: 2007, x-travel 4000 mm y-travel 3000 mm z-travel 2200 mm control Siemens Sinumerik 840 D quill stroke 800 mm max. workpiece weight 20000 kg tool taper ISO 50 BIG PLUS DIN 69871 max. torque at the spindle 2346 Nm spindle diameter 160 mm total power requirement 65 kW weight of the machine ca. 50000 t dimensions of the machine ca. 12,8 x 11,8 x 5,7 m Work table - Clamping surface 2500 x 2000 mm - Table height above floor 800 mm Feed speed - x-axis 0.5 to 10000 mm/min - y-axis 0.5 to 10000 mm/min - Z-axis 0.5 to 10,000 mm/min - Rapid traverse (X/Y/Z) 25 / 25 / 25 m/min - Max. feed force (X/Y/Z) 28,000 / 27,000 / 28,000 N Spindle speeds in 1/min - Gear stage 1: 6 to 848 rpm - Gear stage 2: 850 to 3000 rpm Tool magazine: - 306 slots divided as follows: Number of slots max. length 700 mm: 54 Number of slots max. length 450 mm: 54 Number of slots max. length 300 mm: 63 Number of slots max. length 200 mm: 135 - Tool weight max. 35 kg - Tool diameter with free auxiliary slots max. 325 mm - Tool diameter without free secondary spaces max. 105 mm Accessories - Approx. 30 nos. SK 50 tool holders - 1 measuring probe - Coolant system/paper belt filter & chip conveyor - Cooler Itsdsw Sfkkspfx Aanjr - Oil mist extraction - Fixators - Documentation