Used Koch Wire Drawing Machine for sale (98)

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Gujdpfxjr Nfvms Aabeh Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2016, condition: excellent (used), Multiblock wire drawing line Brand - KOCH Model - KGT 25/10 10-BLOCK DRAWING MACHINE WITH MODEL KEW IV STATIC COILER Inlet tensile strength: 400-500 N/mm2 Inlet dia. range: 7.70 - 2.70 mm Outlet dia. range: 5.60 - 1.60 mm Block diameters: 630 mm (24.8”) 45 KW AC per block (60 HP) Speed: 10 m/sec. (2000 FPM) Gjdpfxenzhwtj Aabsuh KEW IV Static Coiler: 600mm (24.6”) block; 30 KW AC (40 HP AC) KP700 Operator Panel Siemens S7 400 controls Payoff system Dust collecting system 400V, 60 Hz, 3 Ph Mfg. year: 2016

Condition: used, Year of construction: 1974, wire dia. 5 - 17 mm wire length max. 5.000 mm straightening feed stufenlos bis ca. 60 m/min 11 kW, 380 V, 50 Hz 45 kW, 1480 U/min; 380 V, 50 Hz total wight ca. 15 t +++++ Gsdpfx Aashtbfijbouh Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1982, x-travel 390 mm y-travel 330 mm Guedpfsw Spbgex Aabeh z-travel 380 mm control konventionell table surface area 850 x 255 mm max. table load 200 kg number of T-slots 5x T-slot - width 12 mm H8 T-slot - distance 45 mm turning speed range - milling 63 - 2.800 U/min transmission ratio 12 pos. feed 0 - 1.500 mm/min tool taper SK 40 rapid traverse 1.500 mm/min weight of the machine ca. 1,9 t dimensions of the machine ca. 2,0 x 2,5 x 2,8 m Tool Room Milling Machine Universal HECKLER & KOCH - AM 442

Condition: used, Year of construction: 2006, functionality: fully functional, Drilling, Milling, and Dowel Insertion Center – KOCH Model WINDOOR-L, Year of Manufacture 2006 Working Length (Y): 150 – 800 mm / 50 – 1,350 mm (2,100 mm in 2 cycles) Material Thickness (Z): 14 – 60 mm Guedoxgfd Sjpfx Aabsh Maximum material length: 2,100 mm. Material stops on the right and left are automatically lowered to allow processing of oversized workpieces. The machine is equipped with 2 working fields. 2 workpieces, each with a maximum width of 650 mm, can be placed independently. Wider workpieces are positioned separately. Working height: 900 mm Machine features: • 1 horizontal drilling station • Guide bush for drill bits • Glue injection and dowel insertion station Drilling unit: 2 kW Drill speed: 2,800 rpm, with air nozzles for cleaning the dowel holes 1 dowel drill bit, 8 mm dowel diameter Dowel length: 30 mm Dowel protrusion: 7–14 mm, set to 12 mm 2 Milling units, 3 kW each (12,000 rpm): One right-hand, one left-hand rotation with vertical spindle. Frequency inverter for stepless speed control from 6,000 – 12,000 rpm. Spindle diameter: 40 mm, collet length: 70 mm, profile diameter: 100 – 200 mm. 1 brake for the profiling motors, without acoustic enclosure. 1 Vibratory dowel feeder 1 glue pump 1:1 with central lubrication Electronic glue monitoring 1 material clamping system with 10 pneumatic cylinders • 1 material stop on the left and right • Mechanical digital readouts for adjustment Machine cycle is started by push buttons • Modem for remote diagnostics via telephone line KOCH Numeric positioning control PC Pentium CPU Screen area in local language OS (Windows XP Professional): English 15” touch panel VGA graphics + touch screen via LVDS connection USB interface to PC and touch panel Serial and parallel interface to PC 2.5” hard drive All machine functions, including motor control, entered via the touch panel Electrical supply: 400 V, 50 Hz, 3 phase Pneumatic connection: 1 x R 1/2" female thread, 7 bar Dust extraction airspeed: approx. 30 m/sec Ambient temperature at installation: min. 10°C (50°F), max. 40°C (100°F)

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm No of Top Units: 1 Gjdpjikwm Ajfx Aabjuh Positioning of Units by NC: yes Lateral horizontal groups: yes

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Gujdpfx Aod Exwgeabjh Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 980275865, workpiece weight (max.): 1,500 kg, space requirement height: 2,600 mm, space requirement width: 1,700 mm, space requirement length: 3,000 mm, The machine was in production use until recently. It has now been dismantled and stored at our facility. The machine can be inspected by appointment. If you have any further questions about the machine, please feel free to write to us or call us. Gedsxclk Dopfx Aabouh

Condition: used, Year of construction: 1984, CNC Milling Machine Heckler & Koch BA 20 CNC Manufacturer: Heckler & Koch (Germany) Type: Vertical CNC Machining Center (Milling Machine) Control system: Depending on the version – Siemens, Heidenhain, or proprietary HK system (the photos show a panel with a monitor and traditional keyboard, most likely Heidenhain or Siemens Sinumerik control). Worktable: typically 2000 × 500 mm (designation BA 20 = 2000 mm table length) Working travels (X/Y/Z axes): X: approx. 2000 mm Y: approx. 500 mm Z: approx. 500–600 mm Spindle power: usually 10–15 kW Spindle speed: up to approx. 6000 rpm (depending on the version) Tool holder: SK40 or SK50 (SK40 holders visible in the photos) Tool magazine: usually 16–20 tools Cooling: via external coolant nozzle (flexible blue pipe visible in the photos) Total weight: approx. 6–8 tons Power supply: 400 V, 50 Hz, connected load approx. 20–25 kVA Applications: Gjdpfow Uac Hsx Aabjuh - Production of medium-sized metal parts - Defense, machinery, and automotive industries - Suitable for batch and single-piece production Equipment: control panel, keyboard, mouse, vices, guards 📌 Applications: - Metalworking - Batch and single-piece production - Metalworking shops, manufacturing plants

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm Godpfswd Rlfox Aabouh - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: used, Magnet Drilling Machine, Magnet Drilling Machine core hole drilling machine, metal core hole drilling machine DR. BENDER Type EK 323 machine no. 180543 year of construction approx. 1988 drilling capacity 23 mm spindle mounting MK 2 Gusdpfxegmi U De Aaboh spindle speed 160 / 400 / 1250 rpm. magnet 215 x 105 mm drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear steps - left and right rotation - E-magnet KOCH, type KL32/6 - drill head height adjustment guided in linear guide - manual ejector - drill stand rotatable on magnetic base, clamping via tommy screw dimension L x W x H 680 x 380 x 630 mm weight 35 kg good condition

Condition: used, machine/vehicle number: 008050, Max. panel width: 1200 mm Max. panel length: 800 mm No of Top Units: 1 Gujdpfxew Idbae Aaboh No of injectors: 1 Positioning of Units by NC: yes

Year of construction: 2012, condition: excellent (used), Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Machine structure - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm Gusdjmrqriopfx Aaboh - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel - 1 x glue pump 18:1 - 2 x electronic glue control ELC - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X)

Year of construction: 1997, condition: good (used), I sell the multiple drilling machine with inserting KOCH WinDoor Year: 1997 Number of drilling spindles 1 (suitable for dowels 8x60mm) Number of inserting heads 1 Motorical axes adjustment Workpc. length 200-3500mm Workpc. width 20-200mm Workpc. height 30-100mm Available immediately Godpfx Ajfyn Tyjabeuh

Year of construction: 1995, condition: reconditioned (used), multi-spindle drilling machine Koch 25 automatic spindle drill spacing 32 mm setting in the X and Y axes and using a ruler. The machine has been overhauled. Machine type SPRINT 4kW motor. cylinder stroke 300 mm year of manufacture 1995 machine complete and ready to work Heads 25 spindeln pins size width between pins 32 mm standard Godpfxokytcfo Aabjuh

Condition: used, Year of construction: 1993, Machine: Double-sided through-feed operation with additional: 4 drilling supports vertically from above 4 drilling supports horizontally from behind Units: Tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cuts) Workpiece thickness (mm): 15 - 80 mm Dowels (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel projection (mm): 10 - 25 Machine dimensions: Length (mm): 8040 Width (mm): 5850 Height (mm): 2500 Guedpfx Aajwbuw Tebsh

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: A 0204/6707, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 600 mm, TECHNICAL DETAILS Workpiece length: 120 - 2,500 mm Workpiece width: 50 - 600 mm Workpiece thickness: 12 - 40 mm Control: KOCH Numeric with Windows 2000 Sawing station Sawing station part length: up to 560 mm Saw guide: in measuring rail Measuring stop: tear-free cuts Thickness measurement: bar encoder Separate Z-adjustment: for manual and machine operation Gujdpfjvcm Uusx Aabsh Frequency converter: for saw motor Saw blade take-off: available Horizontal drilling station Drilling spindles: 5 spindles per side Dowel tool: 1 x type 3B for dowels 10 x 40 mm Dowel spacing: 7-14 mm Electronic glue monitoring: KOCH ELC Vertical drilling station Empty station: between horizontal and vertical processing Top support: 1 x with 2 guide tracks Vertical drilling support: 1 piece, NC in X + 2 x Y + Z Vertical drilling support: 2 separately adjustable drilling spindles in Y Drilling head: 28 drilling spindles (14 spindles each for X and Y) Suction and clamping shoes: 2 pieces Horizontal drilling spindles: 2 pieces for longitudinal drilling on the front and rear side Grooving head: 0°/90° swiveling Carrier: with linear guides for center support Workpiece center support: (automatically lowerable) with NC adjustment in X Workpiece support Workpiece stop: for processing strips Workpiece width: max. 140 mm Clamping of strips: via back gauge MACHINE DETAILS Height: 2,300 mm Length: 5,600 mm Width: 6,000 mm Basic equipment - NC width adjustment - 1 support with NC axis in Y on each side - 1 horizontal drilling station with 1 drilling spindle per side - 1 doweling tool with ELC glue monitoring per side - 1 vibratory conveyor with control mirror per side - Central axis with 1:1 glue pump - 2 NC height adjusters (Z-axis) - Belt infeed with NC-adjustable belt pulley - Workpiece transport with toothed belt and spring-loaded cams - Central lubrication - Telephone modem for remote diagnosis

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Gusdpfx Aog E Th Soabsh Lateral horizontal groups: yes

Condition: reconditioned (used), Year of construction: 1995, machine/vehicle number: 9511/5376, workpiece height (max.): 40 mm, working width: 1,200 mm, number of spindles: 1, table width: 1,300 mm, table height: 900 mm, working height: 900 mm, pressure: 6 bar, workpiece width (max.): 1,200 mm, KOCH drilling and dowel insertion machine Type SPRINT PTP Workpiece dimensions Workpiece length (Y) 100 - 800 mm Workpiece width (X) 20 - 1200 mm Gsdpfx Aajrc A Nwebouh Workpiece thickness (Z) 10 - 40 mm Machine equipment - Horizontal drilling station with one drilling spindle -Drill holder Ø 10 mm - Dowel hole blow-out and extraction system - Glue application and dowel insertion station with a DW34 dowel tool for dowels Ø 8 mm - ELC electronic glue monitoring system - Vibratory conveyor - Glue pump 1:1 - Workpiece support table 1300 mm wide - 1 stop each left and right - Mechanical digital displays for height adjustment (workpiece thickness) -PC positioning control

Condition: good (used), Construction Site Price: Lot with approx. 350 Corlettes, Cordes and Koch brands, width 1.30m, height 1.88m not stackable and height 1.40m stackable, with runners - used - : Prices (net) per piece ex location: only €29 (net) / piece Manufacturer: partly Koch, partly Cordes Type: unknown Year of manufacture: unknown Load capacity: 600kg For stackable types: additional load of 600kg, stackable 3 times Most with runners for placement/storage in Corlette racks Condition: good – very good Available: immediately Location: Würzburg Gusdpfx Asxnmbhsabeh Type 1a – approx. 51 pieces stackable, plus 1x not stackable 1.30m Low Type: mc-130.641 Own weight: 72kg Stackable three times Dimensions: Width: 1.28m, Depth: 1.14m, Height: 1.40m Type 1c – approx. 300 pieces not stackable 1.30m Year of manufacture: unknown Dimensions: approx. Width: 1.28m, Depth: 1.14m, Height: 1.88m Not stackable Own weight: approx. 85kg

Condition: excellent (used), Förder Geräte Koch, 1.200 W Guedpfxowrpryj Aabsh

Year of construction: 2004, condition: used, Koch dryair tanks 2x200 L 2x100 L with auxiliary heating Regulator Gsdpfxjxltf Ue Aabeuh Art.-Nr.: 2295 year: 2004 price: 7.900.00 contact: Mr. Rainer Eckerle

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Art.-Nr.: 2294 Gjdpfsxltdwox Aabsuh year: 2004 price: 7.400.00 contact: Mr. Rainer Eckerle

Year of construction: 2004, condition: used, Koch dryair tanks 1x400 Liter + 3x100 L heating + controler Art.-Nr.: 2293 year: 2004 price: 7.900.00 contact: Mr. Rainer Eckerle Guodpfx Aaoxltctjboh

Year of construction: 2004, condition: used, Koch dyairdryer EKO 800 800 m³/h Art.-Nr.: 2292 year: 2004 Godpexltb Njfx Aabeuh price: 9,800.00 contact: Mr. Rainer Eckerle