Used Wire Edm for sale (4,099)

Condition: excellent (used), Year of construction: 2003, Machine with water tank and automatic wire threader, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters etc.) Gusdpfju Thd Hjx Aabeh

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Gjdpjwlq Hlefx Aabeuh Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Transport dimensions: 2,635 x 2,865 x 2,200 mm Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000. Gedpsvw Ag Aefx Aabjuh

Condition: good (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, workpiece width (max.): 1,050 mm, No reserve price - guaranteed sale at the highest bid! Condition: Machine has been resealed at the basin TECHNICAL DETAILS Max. workpiece dimensions (W x D x H): 1,050 mm x 800 mm x 295 mm Max. workpiece weight: 1,500 kg Max. workpiece weight: 780 x 630 kg Table dimensions: 780 x 630 kg Axes movement range (X, Y, Z): 500 mm x 350 mm x 300 mm Axis speed (rapid traverse): 0.1 m/s Wire diameter: 0.1 - 0.3 mm Wire tension: 0.1 - 0.25 N Bevel cut unit axis travel range (U x V): ±21° x ±21° Detection method for each axis position (X, Y, U, V): Linear scale Dielectric liquid tank Working volume: 750 l Filter flow rate: 60 l/min Filtration accuracy: 3 μm Filter element: Paper filter x 2 Dielectric conductivity (range): 0.5 - 30 x 10^4 Ωcm External dimensions (W x D x H): 880 mm x 2,070 mm x 1,565 mm Weight (dry): 400 kg Gusdpfovphzvox Aabjh MACHINE DETAILS External dimensions (W x D x H): 2,210 mm x 2,873 mm x 2,150 mm Weight: 3,500 kg

Condition: new, The clamping devices from Becker Erodiertechnik are suitable both for the initial equipment of your EDM machine or expansion of an existing equipment. Round parts, small pins or punches can be clamped quickly and precisely just like larger plates. From the fixed holder with vice or clamping beam including pendulum function, we manufacture everything ourselves at the Karlsbad location. Adaptations to other interfaces or systems are possible. Gedpjlk Hvrsfx Aabsuh We manufacture our products from stainless steel and harden them. Please do not hesitate to contact us if you have any questions or need technical support.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P0050I553, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Max. workpiece weight: 500 kg Travel paths X-axis: 320 mm Y-axis: 220 mm U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse X-axis: 900 mm/min Y-axis: 900 mm/min U-axis: 450 mm/min V-axis: 450 mm/min Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine Gujdpfx Aaov Iazlsbjh - Automatic wire feeder - Many spare parts and wear parts

Year of construction: 2007, condition: excellent (used), Makino SP 43 CNC control MGW-R Travels X: 450 mm Y: 300 mm Z: 320 mm U/V axis: +/- 101 mm Gujdpfjiv H Dqox Aaboh table: 730x580 mm tub: 890x850 mm max.workpiece weight: 900 kg dimensions approx: LxWxH 3000x3000x2300 mm weight approx: 3400 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 60 rpm, TECHNICAL DETAILS Travel X/Y/Z axes: 500 x 350 x 500 mm Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Bath height: 0 - 390 mm Machine table Clamping surface: Grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 Integrated C-axis Indexing and rotation: Interpolation with X, Y and Z as well as spiral machining Speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Guedpfevuqxbsx Aabeh Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Loading volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Distance floor - clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control and dielectric Norms and guidelines Standards: Directive 89/336/CEE Electromagnetic compatibility

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Gusdpfsvuqtfsx Aabjh Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 7,700 h, X travel 600 mm Y travel 400 mm Gsdexgqitjpfx Aabjuh Z travel 350 mm U travel 150 mm V travel150 mm Max. workpiece weight 1 000 kgs Size of working area (L × W) 1 050 × 710 mm Wire dia 0,1 ‒ 0,3 mm (optional 0,05 mm is still possible) Range of wire tension ~3 ‒ 23 N Max. wire speed cca. 420 mm / s Dimensions (L × W × H) cca.. 2 575 × 2 945 × 2 345 mm Place required (for installation) ca. ~3 860 × 4 245 mm Weight cca.4600 kgs High from floor to table surface cca. 995 mm Power required 3 Phasys, 50/60 Hz, cca. 13 kVA Tolerance: “Fine Corner Control”, “Digital PIKA-W Plus” options Visual / additional functions / controller: Smart Pulse (SPW) generator, Linearmotor (X/Y/U/V), absolut linearscales, ceramic working area, automatic wire threading (AWT), wire rotation, sparing power circles, optional Extra-taper (±45°) function, etc.

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Guodpfxsw Syyyo Aabsh

Condition: ready for operation (used), Sillmann EDM LCD12L-CACS-SIL monitor from AGIE machine SN: 1183, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Gsdpfxoi D Tvce Aabjuh

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 Gjdofcl H Ujpfx Aabsuh -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. Gsdpef Nku Rsfx Aabouh On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: excellent (used), For sale: professional rotary electrospindle by the renowned brand System 3R (Sweden), designed for use with Charmilles EDM machines. The device is intended for precise rotation of graphite and copper electrodes during the EDM drilling process, ensuring high machining accuracy and quality. Technical data and features: • Manufacturer: System 3R, Sweden • Model/Reference: 1.6 SER 202101 • Compatibility: 3R clamping system • Original rotary spindle dedicated for EDM • Belt drive – stable torque transmission • Robust industrial design, suitable for continuous operation • System 3R holder with quick-change electrode mechanism • Fits machines incl. Charmilles (e.g. Roboform series) Condition: used, complete, in working order, with normal signs of use. Equipment of this class guarantees precision, reliability, and compatibility with 3R systems – an ideal solution for toolrooms, mould shops, and companies specializing in precise EDM machining. Gusdpfjw Sat Hox Aaboh

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Gjdpfx Aoxaiiljabeuh

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Gjdpfx Aofcl H Isabsuh -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan Gusdpsq Rxz Tofx Aabjh -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 25101.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Gsdpfjw U Dhysx Aabjuh Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Operating hours: 1,657 hours Battery: 48 v / 750 ah Options: - VNA truck - with wire guidance Condition: LIKE NEW!!

Year of construction: 2022, operating hours: 3,973 h, condition: ready for operation (used), Main Drive Gusdjxnd Ifjpfx Aabjh Number of axis 4 This Mitsubishi SG12S was manufactured in 2022. It features a 20-position automatic tool changer and linear glass scales on all axes. The machine includes approximately 300 liters of dielectric fluid, a complete set of original accessories, manuals, and a tool kit. Additional EROWA equipment is also included. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi SG12S machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Gsdpfx Aogiplvsabsuh Length: 5100 mm Width: 1700 mm Height:3100 mm

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Gujdpfxjxk U Hds Aabeh Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Year of construction: 2014, condition: like new (used), functionality: fully functional, • 4 bending rolls with long lifetime tungsten carbide inserts • Bending and breaking of scale in 2 levels (4 directions) • Outstanding bending angle (approx. 540° in total) • Very compact machine housing • Transport of scale by a scale waggon on wheels (screw conveyor optional) • Wire break control as an option • Wire diameter (low carbon) 5.5–6.5 mm • Wire diameter (high carbon) Gjdpfx Aowu Dxmoabeuh • Wire passing speed up to 3.0 m/s

Year of construction: 2018, operating hours: 2,000 h, condition: ready for operation (used), General Data Measurements width 2858 mm Measurements depth 1600 mm Measurements height 2700 mm Machine weight 4150 kg Gusdpfx Aexmbzyoabeh Movement X-Axis Movement 600 Y-Axis Movement 400 Z-Axis Movement 400 Table Outer length 800 mm Outer width 600 mm Table load 1000 kg Additional Equipment Control system: AC FORM HMI with 17" touch screen Linear tool changer capacity: 6 electrodes / Max electrode size: 75 mm diameter, 280 mm length / 4-position electrode changer Best surface finish: Ra = 0.2 μm Erowa ITS-50 automatic chuck Glass scales on X/Y axes Fire protection system Optimal ambient temperature: 20°C / Relative humidity: < 80% This GF Agie Charmilles Form E600 Erosion machine was manufactured in the year 2018 in China. It is equipped with a GF AC FORM HMI control unit. Application Types EDM

Condition: like new (used), functionality: fully functional, Witech brushing machine (for wire) 4 pcs Year of production: 2015 Gusdpfxswu Da Ro Aabsh The brush descaling/cleaning unit is designed for all wire qualities (low-high carbon) wire rod with diameter 5.5–8mm and wire speed up to max 4m/s Used for a very short time (1 year). Very good condition Price: 18,000 euro/piece