Used Wire Rope Hoists for sale (8,306)

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Ksdoq R N Tmopfx Aanonf Stepless control with inverter and radio with belly console optionally available!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Reeving 4/1 Lifting height 10m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Kodpsvx E Ncsfx Aanjnf Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Kjdsvx E I Sepfx Aanjnf Several immediately available in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 3M Knodpovx E Ixofx Aanjf Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2t Reeving 4/1 Lifting height 6m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Knjdpevx E Iljfx Aanjf Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Condition: used, Steel wire ropes, lifting slings made of steel Length: 10 m Kodpfx Ajgzpw Isanonf Diameter: 25 mm Loops right/left Load capacity: 5 t 6 pieces available 161225ä

Condition: good (used), Zip Wire closed spiral in spools Knsdpfx Aaswunmbenof 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Kjdpfx Aasmk S Slenenf Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Knsdpfx Aoxtwddoansf

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg Ksdpfx Aasfcl H Ujnonf

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. Knodef Nku Ropfx Aanof On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg Knjdpfx Aefcl H Ieanjf

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate Knedpfeq Rxz Tex Aanof -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Kedpfxoxz Ufhe Aanonf Mast: X + i - 120 - 3F7000 ID: 26021.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1657 hours Battery capacity: 48 V / 750 Ah Options: - VNA (Very Narrow Aisle) truck - with wire guidance Condition: Like new!!

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm U/V-AXIS TRAVEL: ± 80 mm MAX  PIECE WEIGHT: 450 Kg TANK SIZE: 895 x 650 x 220 mm Knodpfxerhl Iij Aanef TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT

Year of construction: 2015, condition: ready for operation (used), General Data Machine weight 3000 kg Control Unit Brand FANUC Model RoboCut α-C600iA Knodpfx Aex D Duqsansf Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.3 mm Movement X-Axis Movement 600 mm Z-Axis Movement 310 mm Y-Axis Movement 400 mm This 5-axis FANUC RoboCut alpha C600iA was manufactured in 2015, featuring X/Y axis travel of 600 mm × 400 mm and a Z-axis option up to 410 mm. It supports a maximum workpiece weight of 1000 kg and utilizes a FANUC Series 31i-W MODEL B CNC for precise control. Equipped with AI technology for enhanced accuracy and automatic wire threading, it's ideal for detailed machining tasks. Consider the opportunity to buy this FANUC RoboCut alpha C600iA wire edm machine. Contact us for more information. Application Types EDM

Condition: good (used), Hohner Favorit wire stitcher Very good condition, ready to work. A reliable machine, with legendary durability. Technical data: performance: 160-225 cycles / min Ksdpfx Aaswungbjnjnf sewing thickness: 25mm (piercing up to 40mm without closing the clamp from the bottom) wire diameter: max. 1mm Power supply: 380V Weight: 280kg The machine has an adjustable table for block and booklet sewing.

Condition: good (used), Year of construction: 2001, The machine is in good working condition but needs some maintenance. Knodpfx Aaox Ec S Donsf

Condition: used, Year of construction: 1973, functionality: fully functional, • 4-roller configuration Knodpfox It Spsx Aanjf • Asset description text: "4-ROLLER Z-CALENDER" • Several documented upgrades and overhauls listed (hydraulic system overhaul, electronic systems update, control upgrade, preheating system, bubble destruction device, etc.), including specified due dates

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, AGIECUT Progress V2 Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Kedpsvax Iujfx Aanenf Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 1800 mm Measurements height 2200 mm Movement X-Axis Movement 550 Y-Axis Movement 400 Z-Axis Movement 350 This 5-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Application Types Kodpsx D N Hrefx Aanjnf EDM

Condition: used, Year of construction: 2001, functionality: unexamined, used in good condition Kjdpex D Uvxjfx Aanjnf

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm Kjdpfxox D Rqfj Aanonf U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 1997, condition: ready for operation (used), General Data Measurements width 2610 Measurements depth 3270 mm Measurements height 2240 mm Machine weight 2600 kg Control Unit Model System 16-WB Brand FANUC Main Drive Max taper angle ± 30 degrees/80 mm (option ± 45 degrees/40 mm) Number of axis 5 Movement X-Axis Movement 520 mm Y-Axis Movement 370 mm Z-Axis Movement 300 mm (275 mm in water bath) U-Axis Movement ± 60 mm W-Axis Movement ± 60 mm Workpiece Workpiece X 790 mm Workpiece Y 730 mm Workpiece Z 275 mm Workpiece weight 650 kg (with coaxial spindle), 450 kg (with water bath) Table Outer length 750 mm Outer width 590 mm Kjdpfxex Imp Ie Aanonf Additional Equipment Bedra wire unwinding device BAS 45/100E (to the left of the machine), capable of handling wire spools weighing up to 45 kg This 5-axis FANUC Robocut Alpha 1C erosion machine was manufactured in 1997. It features a coordinate travel of 520 x 370 mm on the X and Y axes, and a Z-axis adjustment of 300 mm. The machine can handle a maximum workpiece weight of 650 kg and offers a rapid traverse of 900 mm/min. Ideal for precision erosion tasks, the FANUC Robocut Alpha 1C machine we have for sale. Contact us for further details regarding this erosion machine. Application Types EDM

Year of construction: 2000, operating hours: 4,800 h, condition: ready for operation (used), General Data Machine weight 1200 kg Measurements height 2000 mm Dimensions Machine Length 3200 mm Control Unit Brand FANUC Model 18i-W Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Knodpfx Aajx H U Ebenof Z-Axis Movement 180 mm Y-Axis Movement 220 mm This 5-axis FANUC ROBOCUT α-0iA was manufactured in 2000. It features a travel distance of X-axis 320 mm, Y-axis 220 mm, Z-axis 180 mm, U-axis 120 mm, and V-axis 120 mm. With a maximum workpiece weight of 500 kg and total power consumption of 13 kVA, it's equipped with a Fanuc 18i-W control system. Consider the opportunity to buy this FANUC ROBOCUT α-0iA wire edm machine. Contact us for more information about this machine. Application Types EDM