Used Wire Rope for sale (8,048)

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Stepless control with inverter and radio with belly console optionally available! Ksdpfx Afsq R N Tmj Sjnd

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Reeving 4/1 Lifting height 10m Knjdpfevx E Ncsx Af Sed Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Several immediately available in stock Knedevx E I Sjpfx Af Sjd

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 3M Operating voltage 400V Knodpevx E Ixefx Af Sed Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2t Reeving 4/1 Lifting height 6m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Knjdpevx E Ilefx Af Sed Flange width 300mm Available immediately in stock

Condition: used, Steel cables, wire ropes, lifting slings made of steel Length: 10 m Diameter: 25 mm Loops right/left Kodpfxegzpw Ij Af Send Load capacity: 5 t 6 pieces available 31125ä

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. Ksdpfx Asmk S Slof Sjnd We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Knedpjxtwddofx Af Ssd

Condition: good (used), Zip Wire closed spiral in spools Kjdpfx Afewunmbo Ssnd 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg Ksdpfxsfcl H Ue Af Ssnd

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Knedpfx Afef Nku Rs Ssd Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 Knodsfcl H Ijpfx Af Sod -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm Knjdpoq Rxz Tjfx Af Ssd -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 Knodpfx Aoxrrbbjf Ssd ID: 25101.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Operating hours: 1,657 hours Battery: 48 v / 750 ah Options: - VNA truck - with wire guidance Condition: LIKE NEW!!

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm Knedpferhl Iijx Af Sjd U/V-AXIS TRAVEL: ± 80 mm MAX  PIECE WEIGHT: 450 Kg TANK SIZE: 895 x 650 x 220 mm TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT

Year of construction: 2012, condition: ready for operation (used), General Data Machine weight 3950 kg Measurements height 2220 mm Measurements depth 2395 mm Dimensions Ksdpfxexx Dzmo Af Send Machine Length 2225 mm Main Drive Number of axis 5 Movement X-Axis Movement 400 mm Z-Axis Movement 250 mm Y-Axis Movement 300 mm This 5-axis Sodick AG 400 L wire EDM machine was manufactured in 2012. It features a work tank of 850 × 610 mm, supports a maximum workpiece weight of 500 kg, and offers extensive travel with X-axis at 400 mm, Y-axis at 300 mm, and Z-axis at 250 mm. Wire diameters range from 0.15 to 0.33 mm with a feed speed up to 420 mm/sec. Consider the opportunity to buy this Sodick AG 400 L wire EDM machine. Contact us for more information. Application Types EDM

Condition: used, offer consist of: - control for stitching wire Ksdpfeu Srv Hjx Af Send Horizon stitching wire control function: prevents the stitching wire is used up completely and must be threaded into the stitching head - compatibel with: Horizon SPF-200A

Condition: used, x-axis 370 mm y-axis 270 mm z-axis 250 mm control Sodick LQ33W workpiece length 570 mm Knjdoxx A Ixepfx Af Ssd work piece width 420 mm max. workpiece weight 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, High-precision wire EDM machine at a special price! AGIECUT Excellence 2 Year of manufacture: 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.1 µm Ra Maximum cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.10 - 0.33 mm Including AGIE universal clamping frame Including AGIE Jogger handbox Kedpfxsxx Tgxj Af Sond Including console with 4x USB ports Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. We are also happy to offer commissioning and training on request.

Condition: used, Year of construction: 2015, functionality: fully functional, load capacity: 600 kg, total height: 900 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 49 kg, Metal Wire Baskets with Solid Bottom Dimension: 1200x800x900 mm Material Weight: 48–49 kg/pc Wire & Mesh: Wire diameter 6.0 mm, mesh pitch 50×100 mm Kedpoxwwfpjfx Af Ssnd Solid Bottom: 0.8 mm thick steel plate Load Capacity & Stacking: Load 600 kg/pc in use, stackable up to 6 layers Quantity: 3,000 pcs.

Year of construction: 2011, condition: ready for operation (used), Movement X-Axis Movement 600 mm Z-Axis Movement 300 mm Knjdpfxjxx Dv Ro Af Sjd Y-Axis Movement 400 mm This 5-axis Sodick AQ 600L wire EDM machine was manufactured in 2011. It features a large workzone with internal tank dimensions of 1135 × 890 mm, capable of handling workpieces up to 930 kg and 300 mm in height. It supports wire diameters from 0.15 to 0.30 mm and offers taper cutting of ±20° on 100 mm thickness. If you are looking to get high-quality EDM capabilities, consider the Sodick AQ 600L machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2016, condition: ready for operation (used), This 5-axis FANUC ROBOCUT C600IB was manufactured in 2016, featuring a maximum workpiece size of 1050 × 820 × 400 mm and a weight capacity of 1000 kg. It includes XY table travel of 600 × 400 mm and Z-axis travel up to 400 mm. The machine supports a wire diameter range of 0.10 to 0.30 mm and is controlled by the FANUC 31i-WB system. Consider the opportunity to buy this FANUC ROBOCUT C600IB wire edm machine. Contact us for more information. Application Types EDM Knjdpfx Asxxnhqef Sod

Year of construction: 1995, condition: ready for operation (used), General Data Machine weight 3800 kg Measurements height 2220 mm Measurements depth 3200 mm Movement X-Axis Movement 370 mm Z-Axis Movement 250 mm Y-Axis Movement 270 mm Main Drive Kodpfx Afexxnd Es Ssnd Number of axis 5 Dimensions Machine Length 3200 mm This 5-axis Sodick AQ 327 L wire EDM machine was manufactured in 1995. It features a table/work tank of 570 × 420 mm, supports a maximum workpiece weight of 500 kg, and offers a taper angle of ±25° for 80 mm cutting height. If you are looking to get high-quality precision cutting capabilities, consider the Sodick AQ 327 L machine we have for sale. Contact us for more information about this machine. Application Types EDM

Year of construction: 1991, condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Z-Axis Movement 270 mm Y-Axis Movement 350 mm This 3-axis Sodick A500L wire edm machine was manufactured in 1991. It features a 500 mm X-axis, 350 mm Y-axis, and 270 mm Z-axis, providing precise and efficient operations. If you are looking to get high-quality wire EDM capabilities, consider the Sodick A500L machine we have for sale. Contact us for more information. Kjdexxnklepfx Af Send Application Types EDM

Year of construction: 2014, condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 400 mm Z-Axis Movement 230 mm Y-Axis Movement 300 mm This 5-axis Sodick SL400Q wire EDM machine was manufactured in 2014, featuring a 400 x 300 x 230mm work envelope and U/V axes of 90mm each. If you are looking to get high quality EDM capabilities consider the Sodick SL400Q machine we have for sale. Contact us for more information. Knsdpfxjxxdqzs Af Sjd Application Types EDM