Used Wire for sale (2,952)

Condition: used, Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm Nlodpfxsf D A Abe Airoh -Weight: 32 kg

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Nedpfeq R N Tmex Airolh Stepless control with inverter and radio with belly console optionally available!

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm Njdeuzbayspfx Airslh max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: excellent (used), Year of construction: 2001, loading capacity: max. 2.000 Kg. wire diameter range: 0,8 - 8,0 mm table diameter: 1.300 mm coil outside diam. max. 1.250 mm Nsdpfxsu S Eqho Airolh coil inside diam. min. 320 mm coil hight: max. 1.000 mm speed: 0 - 80 U/min

Condition: ready for operation (used), Year of construction: 2017, operating hours: 30,600 h, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Nlodpfez Hwt Aox Aireh - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: ready for operation (used), Year of construction: 2024, load capacity: 20 kg, arm reach: 3,000 mm, number of axes: 6, This 6-axis OTC Daihen FD19-V25L robot arm was manufactured in 2024. It is designed for versatility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the OTC Daihen FD19-V25L robot arm we have for sale. Contact us for further details. • Robot model: MEGAWELD-V25L • Robot module: MEGAWELD-V25L robot module • Robot controller: Included • Teach pendant: Included; 15 m cable Additional equipment Nledpoz I S I Dofx Airsh • External axis: 1-axis kit, 4.5 kW • External-axis servo motor: AC servo, 2.0 kW • External-axis cable: 20 m • Robot monitoring: Robot Monitoring Unit • Fieldbus: PROFINET board • Multi-axis software: Multi Synchromotion (up to 4 mechanisms) • Laser sensor: HD19-QF laser search • Sensor head: HD19-QF • Sensor controller: HD19-QF, 10 m • Shock sensor: Included • Welding system: WPS, type P403 • Cooling: Water-cooling unit • Welding torch: 500 A, 45°, water-cooled, Fe/SUS • Wire feeder: 4R wire feeder • Pneumatic cleaning station: WRS-SC22XA SE • Transformer: 7 kVA • Control voltage/system: CE kit / transformer case & noise filterThe robot and welding quipment is brand new. Newer installed. We have 3 identical units for sale.

Condition: used, mileage: 6,804 km, power: 81 kW (110.13 HP), first registration: 05/2024, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,032 mm, total height: 1,975 mm, loading space length: 2,602 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and omissions excepted! Internal number: 0906. PM79411 ----EQUIPMENT * Airbag (passenger side) * Trailer coupling, preparation kit - Electrical preparation kit for trailer coupling - Wiring harness, 13-pin socket, and trailer module for retrofitting a trailer coupling * Exterior mirrors, electrically adjustable, heated, and foldable * Acceleration control, intelligent * Double locking for central locking * Rear window, heated, fixed - Interior mirror - Partition with window * Fuel tank 70 liters * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated LED turn signals at the front - Cornering lights, static - High beam assistant * Load compartment protection package - Side panel lining, high - Load compartment floor, vinyl floor covering "Easy Clean" - Load compartment lighting (LED), extra bright * Load securing package - Airline rails on the side walls, left and right, in the middle position, for load securing and 8 lashing points, incl. load securing box with ratchet straps and hooks. * Socket: 12-volt socket in the load compartment (D-pillar) * Partition (metal) with window * 2-stage release for passenger compartment and load compartment (rear door flaps or rear swing door). Prevents locking of open doors. * Transmission: 6-speed manual transmission Nsdpfsz Ik Hfox Airolh * Anti-lock braking system with electronic brake force distribution (EBD) * Airbag driver side * Exterior mirror housing made of plastic, black-grey * Battery: H7 AGM single battery * On-board computer with fuel consumption and mileage information (e.g. remaining range) and outside temperature display * Roof, flat * Roof console * Double-wing rear door with 180° opening angle * Rev counter * Third brake light * Electronic Stability Program (ESP) - Hill start assist - Safety brake assist (EBA - Emergency Brake Assist) - Traction control (TCS) * Power windows front, electric - with quick-down/-up function for the driver's side * Parking brake electronic * FordPass Connect - incl. live traffic information and 5G Modern WLAN hotspot * Windscreen, heated * Grab handle, driver and passenger side * Glove compartment with lockable lid * Interior lighting front with delay function * Automatic climate control front - with recirculation heating - with R-1234yf refrigerant * Headrests front (3) * Paint: Solid color * Steering wheel: Steering wheel made of plastic * Center console, small * Emergency call assistant eCall emergency call system to send an emergency call in the event of an accident or manual activation * Technology package 2 (Trend) - Ford audio system with 13 multifunction display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver drowsiness warning - Traffic sign recognition system - Wrong-way driver warning - Lane keeping assistant incl. lane departure warning - Park pilot system front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particle filter: Diesel particulate filter * Radio: Ford audio system with 13 multifunction display and Ford SYNC 4 - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - FordPass Connect incl. live traffic information and 5G Modern WLAN hotspot - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant - 4 speakers * Tire pressure monitoring system (TPMS - Tyre Pressure Monitoring System) * Windsh

Condition: used, mileage: 35,834 km, power: 107 kW (145.48 HP), first registration: 12/2023, fuel type: diesel, overall weight: 4,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale are subject to change! Internal number: 1417.8757176 Nlodpjz Emqbsfx Airoh ----EQUIPMENT * GAMO conversion into a sales vehicle, including FRESH?MASTER 460 - AIRPLUS refrigerated display case - body in GAMO® sandwich construction, exterior and interior made of GRP (glass fiber reinforced plastic), corrosion-resistant, exterior: white - GELCOAT? surface coating, insulation with high-quality PU hard foam, edge and frame profiles made of aluminum, thermal bridge-free roof and body profiles, white RAL 9016 - adjustable roof ventilation, 2-component cast floor with flocking and sealing, driver's cab connection with passage door, sales flap on the right side in driving direction - REFRIGERATED DISPLAY CASE SYSTEM AIRPLUS? refrigerated display case, two-part stainless steel tub, circular brushed, approx. 4,500 x 785 mm display area, electronic control with hot gas defrosting, digital display, programmable defrost times, refrigeration unit, thermostat-controlled auxiliary fan, continuous, insulated under-counter refrigeration compartment with five openings for installing flaps or drawers, internal roller fans, the evaporator is directly accessible via the service flap - heated condensate tray under the evaporator - REAR WALL washing and hygiene area, hot water supply, double washbasin, under-counter boiler with knee switch, two canisters, refrigeration unit conversion, continuous wall worktop, wheel arch conversion - ELECTRICAL SYSTEM: 230V electrical basic installation with FR distribution box, RCD circuit breaker, fuse 16 amps up to max. 3.5 kW, FR light switch, two FR double sockets (2 at the counter, 1 under the worktop), CEE wall socket 230V/16A. DIMENSIONS: Internal dimensions: 4500x2320x2050mm LWH. External dimensions: 4900x2420x2720mm LWH * Renault air suspension rear axle - Goldschmitt auxiliary air suspension for rear axle * Exterior mirrors with extended arm for 2.35 m body width * Package: Sound & Climate DAB+ - air conditioning with pollen filter - radio MP3 DAB+ with integrated Bluetooth hands-free system * Interface for bodywork (CAN) * Seat: Driver's individual seat, height-adjustable - with lumbar support * Extended rear wiring harness * Pre-wiring for body electrical system * ABS with EBV and brake assist - with automatic activation of hazard warning lights during emergency braking * Storage compartment above the windshield * Airbag: Driver side * Trailer hitch * Exterior mirrors, electrically adjustable and heated * On-board computer * Tachometer * ESP with load detection and ASR - Electronic Stability Program with traction control including hill start assist and trailer stabilization * Power windows * Transmission: 6-speed manual transmission * Glove compartment, closed * Headrests - height-adjustable * Fuel tank 105 liters * LED daytime running lights * Paint: Solid color * Steering wheel adjustable in height * Light and rain sensor * Alternator 185 A * Engine: Start & Stop automatic ENERGY = Technology package to reduce consumption, including start-stop automatic and Energy Smart Management (ESM), a system for recovering braking energy * Pollen filter * Upholstery: Fabric "Kaleido" * Diesel particulate filter, self-cleaning * Side wind assist * Power steering * Seats: Driver's seat height adjustable * Seats: Suspended driver's seat - with lumbar support - with center armrest * Socket: 12V sockets on the dashboard (2 pieces) * Connection for engine information * Underrun protection front axle * Immobilizer, electronic * Ce

Condition: used, mileage: 13,487 km, power: 160 kW (217.54 HP), first registration: 08/2010, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro5, total length: 6,390 mm, total width: 2,420 mm, total height: 3,100 mm, loading space length: 2,961 mm, loading space width: 2,385 mm, loading space height: 1,685 mm, Equipment: all wheel drive, Errors and prior sale excepted! Internal number: 1111. V224078 ----EQUIPMENT * Paint finish 2 6431 bronze green, matte, CARC/IR paint * Lights HELLA/VIGNA+ * Trailer coupling RINGFEDER * Windshield wipers * Heater SOFICA * Rims LEMMERZ * A99 push rod control for long wheelbase * B28 Mech. quick-release device for spring accumulator cylinder * B42 Trailer brake system, two-line * B56 Compressed air filling connection, front * B68 Brake connection, front, left * C04 Chassis parts lowered for superstructures Nodpfx Aoz Emrxoirelh * C34 Anti-slip coating on bumper * C67 Fuel tank enlarged * C75 Protection for tilting hinges, cab * C87 Exhaust pipe pointing upwards * D65 Fastening parts for external superstructures * E11 Electrical system 24V, with camouflage lighting system * E22 Extendable battery box slide * E33 Battery main switch on the battery box * E35 Circuit breaker * E40 ABS trailer socket 24V, 7-pin / 5-pin * E41 Trailer socket 24V, 12-pin * E43 Trailer socket 24V, 7-pin * E44 Socket for external starting * E48 Power supply and warning system (cab-platform) * E52 Antenna cable, power supply for radio * E55 Pre-installation, wiring/antenna, for radio * E57 Socket front and rear, 2-pole * E58 Socket 7-pin, for reversing lights * E59 Socket 6-pin, for battery maintenance * E69 Reading light * E73 Gel batteries, 2x 12V / 100 Ah, maintenance-free * F09 Cab, large, 120mm extended / 120mm raised * F21 Round roof hatch, swiveling * F22 Base carrier for roof structure * F43 Auxiliary heater with engine preheating * F56 Integrated air conditioning * F60 Raising device for cab * F64 Tilting hinges for cab * F78 Painted bare parts * G50 Transmission oil cooler * J28 Tachograph, digital, with additional writing function * JY2 Deactivation warning message missing driver card * JZ1 Tachograph manufacturer Siemens VDO * L02 Outline lights to the front, white * L18 Fog lights, halogen, suitable for wading * L30 Stone guard grille for headlights * L32 Stone guard grille, metal, for turn signals * L35 Headlight beam adjustment * L71 Side marker lights with integrated reflectors * M55 Fuel preheating, with water separator * M89 Intake air preheating for cold start * MQ4 MB 4-cylinder diesel engine OM924LA, 160KW(218PS) * MS5 Engine version Euro V * Q11 Hook trailer coupling, Ringfeder Ruwg K.D * Q32 Rear crossmember for increased trailer load * R30 Semi-lowbed rims 11-20 SDC * S02 Air-suspended driver's seat * S10 Air-suspended passenger seat * S19 Seat cover, imitation leather * S41 Storage compartment behind the passenger seat backrest * S51 Holder for first-aid kit * S56 Cab rear wall without window * S59 Power windows, electric, left and right * S77 Transport holder for a G36 rifle, right side * S78 Transport holder for a G36 rifle, left side * S81 Mirror holder widened * T08 Spare wheel holder * T30 1 spare rim 11x20 SDC * W60 German as language * X39 Lubrication chart, German * Y18 Fire extinguisher with holder * Y31 Tire filling hose with pressure gauge * Y36 Flag holder, left * Y37 Holder for traffic wand * Y38 Glare protection for glazing * Y46 Warning triangle and warning light * Y48 External starting connection cable 6m * Y67 Color control for second paint (paint additive) * Y68 Color control, paint version, cab in 2K * Y69 Painting of aggregates in 2K (LZ52) * Z01 Vehicle with left-hand drive * Z16 Special parts, suitable for wading * Z39 Lashing and loading eyes * Z48 Special parts, German Bundeswehr * Z66 Reduction of wading depth from 1200mm to 1000mm

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Njdpjzz Thbjfx Airolh Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: used, Year of construction: 2007, Booklet Production HORIZON SPF-200A FC-200A VAC-100a VAC-100m This used Horizon booklet system is a powerful machine for professional production of saddle-stitched booklets. It consists of these main parts: - SPF-200A stitching unit - FC-200A front trimmer - 2 VAC-100a and VAC-100m collating towers with 20 feeding stations total Key features: - Fully automatic: Efficient and automated booklet production - Modular: Can add more collating towers to increase capacity - Flexible: Handles offset and digital prints, good for small to medium runs - Automatic format setting: Quick setup for different sizes - High speed: Up to 9,500 sets per hour - Error prevention: Checks for missing/double sheets and jams - Expandable stitching: Can upgrade to 4 stitching heads and loop stitching Technical specs: - Input size: max 508 x 356 mm, min 180 x 105 mm - Final booklet size: max 250 x 356 mm, min 85 x 105 mm - Paper weight: 64 to 300 gsm - Booklet thickness: max 25 sheets / 100 pages (80 gsm) - Speed: Up to 4,500 A5 or 4,000 A4 booklets per hour - Stitching: Standard 0.4-0.5 mm wire, optional 0.6 mm - Collating towers (each): - 10 stations Njdpfx Aijz H Skperelh - Size: max 500 x 350 mm, min 148 x 120 mm - Paper: 40-250 gsm - Capacity: 55 mm per station - Speed: Up to 9,500 sets/hour - Power: 230V/50Hz - Weight: About 1,365 kg - Size: About 3,450 x 810 x 1,250 mm (L x W x H) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6 h, travel distance X-axis: 2,465 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 378 mm, number of axes: 5, This 5-axis BIESSE ROVER PLAST A FT 1224 was manufactured in 2023. It features a working area of 2465 mm x 1260 mm and a Z-axis stroke of 378 mm. The machine is equipped with a powerful 13 kW machining unit capable of up to 20,000 RPM. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE ROVER PLAST A FT 1224 machine we have for sale. Contact us for further details. Nledpfxjz H Rk Uj Airjh • Working Area / Table Dimensions: X = 2465 mm, Y = 1260 mm• Z-Axis Stroke: 378 mm• Maximum Axis Speed: X = 85 m/min, Y = 60 m/min, Z = 20 m/min• Maximum Piece Passage in Z: 200 mm (170 mm with Sweeper Arm)• Worktable Type: FT PLUS phenolic layer table with 30 mm grid layout, 12 mm MDF matrix plate• Vacuum System: Multi-zone vacuum system (4 independent zones)• Vacuum Pump: 1x 250 m³/h cam vacuum pump (dry running, maintenance free)• Machining Unit: 5-interpolating axes machining unit, 13 kW (17.4 HP) S6 / 11 kW S1, HSK F63 adapter, liquid-cooled, up to 20,000 RPM• Axis Angles: C-axis 360° continuous rotation, B-axis +/- 150°• Coolant Unit: Liquid cooling system (absorbs 1600 W) for electrospindle• Tool Tool Changer / Magazines:• 13/16-position linear side tool changer mounted on machine bed• 8-position revolving tool changer mounted on X-carriage• Measuring Systems: Digital tool length presetter (for diameters up to 130 mm)• Software: BH660 PC-based control with WRT (Windows Real Time), bSolid (3D CAD/CAM), bSolid 3-Axis & 5-Axis machining modules, bNest (Nesting module), bSolid File Import Module• Additional Features:• LED light strip for work area illumination & L-shaped LED projector for vacuum pod positioning• Ionizer for static charge reduction on plastics• Tool lubrication system (air-oil mist) for non-ferrous material processing• Wired remote control pad• Uniclamp adapters (4x) and Uniclamp clamping devices (4x, H=74mm)• Vacuum modules: 6x (132x146 H74mm), 4x (132x75 H74mm), 4x (132x54 H74mm)• Air cushion blower for easy loading/unloading• Barcode scanner (1D wireless)• UPS backup for machine PC (7-10 min power backup)• Power Supply: 400 V / 50 Hz, 3-phase (without neutral conductor), voltage tolerance +/-10%Safety Standard: CE / UKCA with Full Bumper safety system and protective enclosure

Condition: ready for operation (used), Year of construction: 2021, arm reach: 2,010 mm, total width: 4,000 mm, load capacity: 10 kg, overall weight: 8,000 kg, product length (max.): 5,200 mm, number of axes: 6, Welding robot manufactured in 2021. This Yaskawa Robotic Welding Cell RWC L1_OS 15330 features a robust configuration with multiple Yaskawa Motoman robots and advanced welding equipment. It includes a maximum reach of 2,010 mm and a payload capacity of 10 kg. If you are looking to get high-quality welding capabilities, consider the Yaskawa Robotic Welding Cell RWC L1_OS 15330 we have for sale. Contact us for further details. • Power supply: 400 V / 50 Hz • Rated power: 70 kVA • Main fuses: 3 × 100 A • Compressed air supply: 6 bar Additional equipment • Robots: • 2× Yaskawa Motoman MA2010 (6 axes; max. reach 2,010 mm; payload 10 kg; repeatability ±0.08 mm) • 2× Yaskawa Motoman MA1440 (6 axes; max. reach 1,440 mm; payload 6 kg; repeatability ±0.08 mm) • Robot controller: Nljdpfsz N Hrbox Airjh • Yaskawa DX200 multi-robot controller • Positioner: • Yaskawa RWV2-M2-1500-2500-1850 (max. payload 1,500 kg; distance between mounting plates 2,500 mm; swing diameter 1,850 mm; 3 external robot axes; weight approx. 3,400 kg) • Welding equipment: • 4× Fronius TPS400i welding power sources • 4× Fronius WF 25i wire feeders • 4× Fronius CU 1400 cooling units • 4× Fronius welding torches • 3× Abicor Binzel automatic torch cleaning units • 3× Q-Set automatic torch calibration systems

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: Nodpfjz N Hxhjx Airelh - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Nodpfxoy Hpame Airslh

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush shafts are equipped as standard with alternating plastic and wave wire discs to achieve the best possible sweeping performance, even with heavy and stubborn dirt. ? Dücker FKM 2400 ? With municipal mounting plate receiver ? Implement plate size 3 and 5 ? Very little use, always stored in a shed Nedpfx Aez Ta Rxoirslh ? Working width 0°. 2,400 mm ? Working width 15° 2,300 mm ? Working width 30° 2,075 mm ? Sweeper roller diameter: 600 mm ? Hydraulically raise/lower ? Hydraulically swivel right/left ? 2x water tank ? Water spray ? Support wheels ? Support Manufactured with a stable, torsion-resistant housing with double-walled construction. The sweeping roller is suspended and adjustable in height, with stepless adjustment, and consists of disc brushes in plastic/wave wire, 600 mm Ø, with heavy-duty wheels 250 mm Ø directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Implement plate size 3 or 5, including cylinder Drive, hydraulic, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally with: Hydraulic tilting of the brush right/left Water spray device in front of the brush Boundary lights LED and warning flags Changeover valve, electric Financing is possible through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: new, Galen Hot Slag buckets are made of Hardox HiTemp material, special adapters, teeth and welding wire. Hot slag can reach temperatures of approximately 750 °C so extend durability with Galen bucket Nlsdpfxstn Dh Eo Airjh

Year of construction: 2022, condition: used, Model: TQC-650B Max. Forming Area: 650*300mm Max. Forming Depth: 125-180mm Sheet Thickness: 0.3-1.8mm Sheet Width: 660mm Nlsdpfx Aeyvh S Hoirjh Max. Forming Speed: 30 times/min Air Pressure: 0.6-0.8mpa Air Consumption: 2.0m³/min Water Consumption: 0.5m³/h Rated Power: 98Kw Used Power: 69Kw Power Supply: AC 380V,50Hz, Three-phase, Four-wire Dimension: L7000*W2000*H3100mm Weight: About 5T

Year of construction: 2022, condition: used, Model: TTF-520AF Forming Area: 520mm x 400 mm Forming Depth (Max.): 110mm Sheet thickness: 0.2-1.6mm Forming Speed (Max.): 30times/min Air pressure: 0.6-0.8mpa Air consumption: 3.0 m³/min Water consumption: 0.7 m³/h Nljdpfxsyvh Tqs Airjh Sheet width (Max.): 550mm Suitable Sheet: PP, PS, HIPS, PET, PVC, PLA etc. Power supply: AC 380V, 50Hz, Three-phase, Four-wire Used power: 55Kw Rated power: 136Kw Heating power: 75Kw Procedure: Forming-punching-cutting-stacking Dimension: L10800*W4650*H2670mm Weight: About 11.0T

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Nledpfez Rmvcsx Airsh Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill-start assist * Emission standard EU6e (EC) * Preparation for tow hitch * Towing eye at the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN compartments, and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirror left and right, convex, with LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist (Front Assist) * Battery 520 A (92 Ah) * Rubber floor covering in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip control (ASR), and ABS * Operating voltage 12 V * Stone chip protection * H2 - Normal roof * Differential lock on the rear axle (manually engageable, mechanical) * Immobilizer, electronic * Parking assist system (PDC) front and rear * Entry handles on the rear pillars Nsdpfx Aio Aauvnsrelh * USB Type-C data and charging ports with increased charging power * Daytime running lights with assist driving lights and coming/leaving home function * Electrical connection block and KFG (vehicle-specific wiring harness) * Premium interior noise damping measures * With UNECE CS&SU (Cyber Security and Software Update) * 4-cylinder diesel engine, 2.0L, engine code 03N.G * Automatic distance control (ACC) * 8-speed automatic transmission 4x4 * Glove compartment with lockable flap, illuminated * Entry handle on the partition in the cargo area * Automatic climate control "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Interior rearview mirror, automatically dimming * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assist "Light Assist" * Leather multi-function steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Driver alertness and fatigue detection with driver monitoring camera * MAN SmartLink * 130 kW (LD - low power) * Fog lights including cornering lights * MAN Connect services including call services * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * 12 V socket, cup holder * Region code "ECE" for radio * Tire pressure monitoring system (TPMS) * L3 - Standard * Three-point automatic safety belts with height adjustment * Rear wing doors with 270-degree opening angle * Heat-insulating glazing * 12 V socket in the cab (in the instrument panel) * Suspension seat "ergoActive" left * Suspension seat "ergoActive" right * Seat belt warning, front * Seat covers in fabric "Toronto Grid" * Seat heating for driver and front passenger, separately adjustable * Sidemarker lights * 2 remote control keys * Approved as a 3.5-ton vehicle * Start-stop system with brake energy recovery * Lane change assist (Side Assist) * Side wind assist * Headlight cleaning system, washer fluid level indicator, heated * Windshield washer nozzles * Windshield wiper intermittent control with light and rain sensor * LNFZ (light commercial vehicle) version with up to 3 seats * Keyless Go * Sliding door, right * Turn warning on both sides and drive-off alert * Turn assist braking function * Emergency assist including travel assist and lane assist * Preparation for alcohol interlock * Speed limiter with predictive control * Multi-function front camera * Partition * Step illumination * Digital radio reception (DAB+) * F

Condition: used, mileage: 400 km, power: 130 kW (176.75 HP), first registration: 10/2025, fuel type: diesel, color: white, gearing type: automatic, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Approved as a 3.88t vehicle * Approved total weight * Standard climate zones * Electronic Stability Program (ESP) * Tow hitch, detachable and lockable * One towing eye at the front * Disc brakes at the front * Increase of approved total weight from 3.5t to 3.88t * All-wheel drive * Leather multifunction steering wheel, heated with Tiptronic * Partition, without window * Three-point automatic seat belts at the front with electric belt tensioner * Normal roof * Double bench seat in the cab on the right with storage compartment * Driver's seat on the left * Extended interior noise reduction * Seat heating for front seats, separately adjustable Nljdpfxjzx Nabj Airjh * Windshield in heat-protective glass, heated * Central locking "Keyless-Go" without safe lock * Safety interior mirror, dimmable * Dashboard with special fittings * Exhaust concept, WLTP3 N1-III, N2//EU6EC * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Rubber floor covering in the cab * Wooden floor in the cargo area * Lateral interior paneling in the cargo area (up to the roof frame) made of plywood * Incomplete truck approval * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors left and right, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Sun visors with mirror * 2nd heat exchanger plus 2nd evaporator * Lashing eyes for securing cargo * Lane assist plus emergency assist and traffic jam assist * Radiator protection grille * Rear mud flaps * Interior grab handle (entry at the partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on the rear pillar, left + right * Speed limiter up to 90 km/h * Tire pressure monitoring, frequency 433 MHz High * Start/stop system with recuperation * Navigation system (Baseline) * Auxiliary heating with air and water heating, programmable * Park assist * Optional infotainment (MIB3 MP) version 2 * Second battery * High beam assistant * LED headlights * Front Assist with warning and braking for vehicles, pedestrians and cyclists * Windshield wiper intermittent control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Automatic distance control * Fog lights and turning lights * Headlight cleaning system * LED interior lighting concept in the passenger/cargo area * Daytime running light with assistant driving light and coming/leaving home function, automatic * Comfort telephony with LTE and wireless charging * Preparation for Smart TCO * Seat belt control, E-contact in the seat belt buckle * Wired & Wireless App-Connect * 230V inverter and socket for Europe * Country cluster "WLTP EU approval" * BSIS driving direction right, with MOIS * 4-cylinder turbo diesel engine 2.0 L / 130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Distraction and fatigue detection * With socket at the front * 8-speed automatic transmission for all-wheel drive * Preparation for alcohol interlock * Acoustic warning system for engaged reverse gear, can be switched off * Battery 520A (92Ah) * With rear view camera system (version 2) * Air conditioning with electronic control * With crosswind assist * With predictive speed limiter (pLIM) * Seat covers in imitation leather * With UNECE CS&SU * Pan-European eCall * Air conditioning with manual control with additional cooling for the cargo area * Light alloy wheels "Li

Condition: used, mileage: 65,906 km, power: 382 kW (519.37 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Exhaust outlet on the floor, without reversing warning system, LED lighting, mechanically operated lift roof, 2 air horns on the cab roof, 2 rotating beacons, pre-wiring for rear-view camera, ASR (Anti-Slip Regulation), emergency braking assistant, lane departure warning system, without distance warning system, navigation system 7'' + Europe and Russia map, MAN sound system, Rockinger Type 500G, ARK HYVA 20-60S, lifting height 1570 mm, lifting capacity 200 kN, container sizes 4550 - 7050 mm, auxiliary drive connected to the engine, not switchable, fixed PTO. Nljdpfx Ajzciw Aeirjh

Condition: used, mileage: 1,04,636 km, power: 315 kW (428.28 HP), first registration: 09/2020, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,600 mm, loading space height: 600 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 69124A Equipment lines and packages * V2J Arocs 5 Exterior * B1Z ABS can be switched off * F6I Approach/front mirror, heated * Q7V Trailer coupling: center axle trailer, ring spring D50 * E6A Trailer socket 24V / 15-pin * F7Z Footboard with handrail on the roof * Exhaust to the right side * C7J Batteries arranged side by side * B1B Electronic braking system (EPB) with ABS+ASR * ClassicSpace * B4M Compressed air tank, steel * B4A Compressed air unit with condensate monitoring * B1H Compressed air unit, medium * F6R Air horns (2) on the cab roof * Cab: mounting height 420 mm * F7Y Cab: movable cab entry step * F3W Cab: tilting device, hydraulic * F1O Cab: M ClassicSpace, 2.30 m, tunnel 320 mm * F3B Cab: spring-mounted, comfort * Cab floor with engine tunnel 320 mm * Cab width 2.30 m * Cab variant: M * E1N Generator 100 A * K3V Urea tank (AdBlue): 60 liters * D8A Sliding roof, manual (steel) * N8D Hydraulic pump (Meiller pump - 5 pistons - 255 / 1) * Body/superstructure: chassis for dump truck * C8E Fenders, half shells, rear * K5A Fuel tank: 290 liters, steel, left * C6J Steering booster pump, unregulated * CLW Power steering cooler * M8B Air intake behind the cab * M6L Air compressor, 2-cylinder * M5V Engine brake, reinforced * L1I Fog lights with LED daytime running lights * N2E Auxiliary drive MB 131-2c * N6Z Oil cooler, transmission * Wheelbase not specified * C1Z Wheelbase variant 3900 mm * C0J Frame overhang 1200 mm * Curb mirrors * Q8M Rear crossmember, lowered, reinforced * M7J Underride protection under the front bumper * L2H Side marker lights, LED, flashing * F5L Sun visor, exterior * C6Y Stabilizer bar, rear axle * C6Q Stabilizer bar, front axle * R1T Steel rims 11.75x22.5 (on the front axle) * Stowage flap, outside left * F7B Bumper corners, front, in steel * B2B Drum brake, front and rear axle * C7A Underride protection, rear, fixed * L9A Preparation for rotating beacons * L9B Preparation for additional headlights * I5A Permissible total weight 18.00 t Interior * J6A Dashboard, Classic * D0S Compressed air connection in the cab * E9G Electrical pre-wiring in the cab 24V / 100 A * Electric windows * D6Z Interior filter for construction site vehicles * B1F Air dryer, heated * F4I Rear window * E2J Circuit breaker system * D3T Seat cover / upholstery: co-driver seat, velour * D3Q Seat cover / upholstery: driver's seat, velour * D1N Seats in the cab: co-driver's seat, multi-adjustable * D1C Seats in the cab: driver's seat, comfort suspension seat * 12V socket in the co-driver's footwell * E3L 24V socket in the co-driver's footwell, additional * D7A Additional thermal insulation Multimedia * J2H Audio system: Radio Multimedia Touch * J2Y CB radio * J1A Info display, 10.4 cm * J1O Tachograph / EC control unit * J3V Truck Data Center 7 (fleet management system) * J8Y Preparation for Truck Data Center (fleet management system) Comfort and Environment * G4E All-wheel drive, switchable * Automatic switching for headlights (light sensor) Nedpfx Ae Aa Eploirelh * M5C EURO 6 standard * Suspension: leaf / leaf * Q2U Suspension: rear leaf springs 13.0 t * S5A Speed limiter * S5Z Speed control system (cruise control) * G2C Gearbox, 12-speed - Type: G 230-12 * F8F Comfort locking system * Steering wheel with multi-function buttons * F8W Rain sensor * G5G Transmission Mercedes-Benz PowerShift * F8B Key with remote control (2) * D4Y Sunblind, side window, driver's door * Stowage compartments with covers behind the driver's and co-driver's s

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. Nlsdpovc Aklsfx Airsh *