Used Wollmer Chp for sale (206)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,22,000 h, functionality: fully functional, power: 250 kW (339.91 HP), number of cylinders: 8, Used combined heat and power (CHP) unit, manufactured in 2010, for sale, complete with container. MAN gas engine overhauled in 2024 (proof of overhaul available in the form of an invoice). Cjdpfx Aszkwc Ieizsri

Condition: like new (used), Year of construction: 2026, functionality: fully functional, load capacity: 7 kg, arm reach: 850 mm, controller manufacturer: Universal Robots, teach pendant manufacturer: Universal Robots, input voltage: 230 V, type of input current: AC, Equipment: documentation/manual, Robot arm and controller are in almost new condition. Controller in OEM version (without housing). Controller, manual, control cable, and power cable (Switzerland) included. No teach panel available. Original packaging for the arm is available. Total operating time: 937.8 hours. Crjdpfx As Ahfnmsizei Travel time: 115.5 hours. An on-site inspection in Zurich is possible.

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Codpfxezba Nyo Aizjri Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW Crsdpfx Ajxcudajizei MAN V12-1900  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1397 kW MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. Crodps Ahm Iiefx Aizoi The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: F16/56XTA1/A/01, overall weight: 1,120 kg, load capacity: 100 kg, input voltage: 400 V, type of input current: three-phase, Stäubli TX200 industrial robot including CS8CHP controller and Stäubli teach pendant – manufactured in 2016. We are offering a used Stäubli TX200 industrial robot for sale, including the original Stäubli CS8CHP controller. Technical specifications: Manufacturer: Stäubli Model: TX200 Controller: CS8CHP Year of manufacture: 2016 Payload: 100 kg Condition: Used Scope of delivery: Stäubli TX200 robot Original Stäubli CS8CHP controller Stäubli teach pendant Connection cable Operating manuals Scope of delivery as shown in the photos The robot comes from an industrial research and development environment and has been carefully maintained. The system was in operation until it was dismantled. Inspection is possible by appointment. We will gladly send you further photos or technical information upon request. Csdjzli Huspfx Aizori

Condition: used, Year of construction: 2015, operating hours: 50,000 h, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 60,000 rpm, fuel: domestic gas H, type of cooling: air, nominal power (apparent): 999 kVA, input frequency: 50 Hz, input current: 1,444 A, Equipment: documentation/manual, Used natural gas-fired combined heat and power plant for electricity and industrial steam production. Cedpfx Aiez I T Ekozsri Main equipment: • Capstone C1000: five C200 microturbine modules, each rated at 200 kW; electrical output of the complete package: 999 kWe; 400 V / 50 Hz; grid-parallel operation; common acoustic enclosure and control system. • APROVIS waste heat steam boiler: rated production of 2,000 kg/h of saturated steam at 6 bar(g); maximum allowable pressure 9 bar(g); equipped with two economizer stages for heat recovery. • Reinhard Simon CKO501G supplementary duct burner: 500 kW, for additional exhaust gas heating upstream of the boiler. • BIO-KOMP fuel gas booster compressor: 30 kW, maximum flow 340 Nm³/h, discharge pressure 6 bar(g). The plant has been regularly maintained under a maintenance contract, with components replaced in accordance with the maintenance schedule. One of the five turbine modules is currently non-operational. Operating hours: T1: 53,191 h; T2: 50,891 h; T3: 51,628 h; T4: 52,691 h; T5: 49,487 h. The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. Technical documentation is available. Inspection, price and collection terms are subject to agreement.

Condition: new, Year of construction: 2026, power: 180 kW (244.73 HP), number of cylinders: 12, cubic capacity: 25 cm³, nominal power: 200 kW (271.92 HP), Thermal output 320 kW Cjdoy Urx Uopfx Aizori

Condition: good (used), CHP natural gas, 2 pieces Onsite Energy ME3042L3 Bj 2009, Engine: MTU E3042L9 year 2016 23.000h operating hours, Crodpfjun I N Hsx Aizei Generator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorber chiller: Carrier 16LJ-A24E 689KW cooling capacity Emergency cooler: Güntner GFH 090.2B/2x2-M 12m chimney, silencer, pumps, actuators, dampers, valves, gas control system Higher-level control: synchronization, load management, island operation, grid support, ec , load control cabinets 714KWe, thermal 1058KW, cooling 689KW

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM Cedpfoyhc T Isx Aizsri - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: used, mileage: 2,64,549 km, power: 61 kW (82.94 HP), first registration: 11/2004, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 5, emission class: euro3, total length: 5,650 mm, total width: 1,960 mm, total height: 2,500 mm, loading space length: 3,240 mm, loading space width: 1,900 mm, loading space height: 1,440 mm, Equipment: ABS, full service history, power assisted steering, General information Number of doors: 2 Model range: May 2001 - Jul 2006 Model code: ### Cab: single Technical information Torque: 200 Nm Number of cylinders: 5 Engine capacity: 2.461 cc Weights Empty weight: 1.930 kg Carrying capacity: 870 kg GVW: 2.800 kg Functional Make of bodywork: van Stenis Carrosserie Crodpfx Ae Ah Ittoizsi Interior Interior colour: grey Maintenance, history and condition APK (MOT): tested until 02/2027 Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - Controlled slip differential - Front headrests - Heat reflecting glass - Immobiliser - Tinted glass

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Cjdpfx Aoz N Am Uoizsri Stock number: 1173

Condition: like new (used), Year of construction: 2018, operating hours: 865 h, functionality: fully functional, For sale: Jenbacher gas engine JMS 420 GS-B.LC. A used, high-performance Jenbacher JMS 420 GS-B.LC gas engine (series 4) for stationary use in combined heat and power (CHP) plants is for sale. Manufacturer: INNIO Jenbacher. Type: JMS 420 GS-B.LC. Electrical output: approx. 1,400–1,500 kW (depending on gas type and configuration). Gas type: natural gas / biogas / sewage gas. Year of manufacture: 2018. Operating hours: 865 h. Condition: engine preserved. Scope of delivery: engine including control panel, exhaust system, etc. Special features: high electrical and thermal efficiency, reliable MWM/Jenbacher technology for continuous operation. Location: 48599 Gronau. Availability: immediately / by arrangement. Price: negotiable (upon request). If you are interested, have questions about technical details, or would like to arrange a viewing appointment, please do not hesitate to contact us. Codpfx As Ahnzboizsri

Condition: good (used), Year of construction: 2006, total length: 6,000 mm, total width: 1,950 mm, total height: 3,850 mm, overall weight: 5,000 kg, For Sale: Make: Mecatherm Model: BLOC HPII Included: - Mecatherm pre-proofing cabinet / pre-proofer (without infeed conveyor!) - control panel - tray supply and discharge conveyor - 90-degree curved conveyor for trays - Mecatherm spreading unit - documentation Conveyor width: 700 mm Spreading conveyor width at the pre-proofing cabinet outlet: 1000 mm 8 rows stacked on top of each other. Codpfxozx Er Hj Aizjri Price includes careful dismantling and loading into the truck / container. It is possible to view the machine on site. It is currently still set up. If you have any questions or comments, please feel free to call or email us.

Condition: good (used), Profile roof tiles Entry width 1250 mm Material thickness 0.5 - 0.75 mm Cedoxam Raopfx Aizori Year of manufacture 2002 Speed 8 m/sec.

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Crjdpsz D Efnefx Aizei Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device Crede Ah Hxnopfx Aizoi - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 30160328026, power: 210 kW (285.52 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, nominal power: 210 kW (285.52 HP), This CHP unit comes from an investment that was never put into operation. Crjdeyzcxrspfx Aizoi

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Credpfx Aisy Iu Hnezsi Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Cedpfx Aijz Ehc Eezsri Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation Codpfszxqd Isx Aizsri The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: like new (used), Year of construction: 2013, For sale is a Leadwell lathe LTC-25 iM -Control Siemens Sinumerik 828D -Operating hours approx. 1000h "rather less" -connected load approx. 23 KW weight approx. 6.7t -Turning diameter max. 310mm turning length 1,000 rpm range 35-3,500 rpm -Bar passage D 77mm -VDI drum turret (VDI 40 with driven tools) -Speed ​​range 3000 rpm, number of tools 12 pieces -Tool measurement via Renishow probe manually stretchable -Programmable tailstock with M functions/ additional foot switch for quill movement -Coolant system 4 bar -Adjustable clamping pressure of the chuck Cedpfsh Aw Rkox Aizjri -Hainbuch quick-change system, centroteX/ capteX on collet small/collet large/jaw chuck D250mm Various collets "see pictures" can also be purchased -Preparation for attachment of a bar feeder -Preparation for collecting device for workpieces -Set-up dimensions approx. 5000 mm x 2300 mm x 2000 mm -Hinged belt chip conveyor -Training documents and machine documents as well as other documents from attachments are available. -Machine is under power and is still in use -Delivery time Immediately -Many tool holders, turning tools, drills and tables can be purchased at an additional cost. see pictures

Condition: ready for operation (used), Year of construction: 2017, operating hours: 45,699 h, functionality: fully functional, machine/vehicle number: 81248168054807, power: 530 kW (720.60 HP), type of cooling: water, nominal power (apparent): 660 kVA, Equipment: documentation/manual, We are offering a used MAN E3262 LE202 combined heat and power (CHP) plant, manufactured in 2017. For sale is a standard-production CHP plant with an electrical output of 530 kW, designed for operation as a biogas plant or with natural gas. The plant is based on a MAN gas engine and a Leroy Somer synchronous generator. The corresponding manufacturer's data sheet is available. The unit is ready for operation and has been functioning perfectly up to the present. The entire plant is for sale, including the CHP unit, container with antechamber and switchgear cabinet, fresh and used oil tanks, plate heat exchanger, exhaust stack, exhaust gas heat exchanger, and some consumables. History & Maintenance: • Commissioning: 17.10.2017 • Major overhaul: carried out on 11.12.2025 - Replaced: cylinder heads with the latest version (M18), piston assembly including pistons, liners, connecting rods and all bearings, main cooling circuit pumps new • Last maintenance: turbocharger replacement in April 2026 - Technical data: • Plant type: CHP biogas plant 530 kW • Drive engine: MAN gas engine (internal combustion engine) • Engine number: E 3262 LE 202 Crsdpfx Ao Agu Tijizsi • Electrical output: 530 kW • Thermal output: 559 kW • Firing heat output: 1358 kW • Power factor: 0.95 • Efficiencies: Electrical efficiency 39 % | Thermal efficiency 41 % • Heat extraction: Cooling water heat 264 kW + mixed heat HT 75 kW + exhaust gas heat up to 250°C / 220 kW Generator specifications (synchronous generator): • Manufacturer: Leroy Somer • Type: LSA 49.1 S4 C6S/4 • Rated apparent power: 660 kVA / I = 630A • Rated voltages: 400/230V • Grid connection / rated current: Star / 795 A • Protection functions (grid protection relay): AMG 2 (Leonhard/Woodward Stuttgart), including overvoltage/undervoltage protection, overfrequency/underfrequency protection, phase jump and vector jump. Complies with the BDEW guideline Chapter 2.5.3.

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit Cedoyw Tmlepfx Aizori 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater Crsdpfx Aijvytfujzei - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.