Used Wood Debarking System for sale (16,193)

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Dkjdpfed E R D Sex Ag Reg Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: excellent (used), Year of construction: 2006, power: 18.5 kW (25.15 HP), Slow-running unit with moving floor 15 kW motor Dsdpfex R Uhqex Ag Rekg Only 300 operating hours

Condition: refurbished (used), Year of construction: 2008, operating hours: 3,119 h, overall weight: 25,000 kg, Doppstadt DH 910 Panther - Year of manufacture: 2008 - Engine: Mercedes Benz - Operating hours: 3119 - Remote control - Weight: 25,000 kg Dedpfx Agjw N Nwve Rekg The machine is fully overhauled and immediately available.

Year of construction: 2015, operating hours: 600 h, condition: ready for operation (used), General Data Measurements height 2350 mm Measurements width 3460 mm Measurements depth 1670 mm Dedpfx Ajx D Raasg Rekg This CEFLA INTER-TEC was manufactured in 2015. Ideal for woodworking applications, it represents a reliable choice for enhancing your production capabilities. Contact us for more information. Application Types Other Woodworking Machinery

Condition: excellent (used), functionality: fully functional, Grinding machine for turned parts Hempel P9 Dodpex Dq H Tjfx Ag Rokg Working length: 900 mm Max. grinding diameter: 100 mm

Condition: excellent (used), Year of construction: 2022, Shredder . 800 x 480 Contact only serious interest !! Dkodpjtznxuofx Ag Rjg gearbox 11kw 7400Nm + 2x 5200 eur

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: Dodjin Ewlspfx Ag Rokg - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: used, Year of construction: 2003, functionality: fully functional, overall weight: 3,500 kg, pressing force: 60 t, input frequency: 50 Hz, operating temperature: 100 °C, input voltage: 380 V, cylinder diameter: 65 mm, SECOND-HAND UNIVERSAL HOT PRESS FOR VENEER AND SOLID WOOD GLUED PANELS WITH SIDE PRESSURE CYLINDERS ORMA MOD. NPC/L Vertical thrust - Total thrust – 60 tons - Specific pressure – 2 kg/cm2 - Plate dimensions – 2500x1300 mm - Cylinders – 4 - Cylinder diameter – 70 mm - Electric boiler thermal power – 18 kW - Voltage – 400/3/50 Hz Horizontal thrust - Total thrust – 25 tons - Cylinders – 5 - Cylinder diameter - ø 65/40 mm - Operating temperature - 100°C - Weight - 3.5 tons - Power - 21 kW 29 A Dksdpfox Rrb Iox Ag Reg - Voltage - 380/3/50 Hz - Dimensions - 3100 x 1650 x 1800 mm - CE standard - Year 2003

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, Wood chipper Zeno ZTH 800/820-300 + Mesutronic metal detector Year of production: 2015 Technical condition: perfect, used only for 3 weeks Technical data: * Infeed width: 820 mm Dedex N Ufmopfx Ag Rskg * Infeed height: 300 mm * Rotor with 2 knives * Main motor: 90 kW * Weight: 10 tons

Year of construction: 2020, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 18000 RPM Spindle motor power 5.6 kW Movement X-Axis Movement 3350 mm Z-Axis Movement 180 mm Y-Axis Movement 200 mm Dkjdsx D Hngjpfx Ag Rjg This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), functionality: fully functional, CAMAM GC6/6F-2L Carousel Milling Machine Number of milling units: 6 Number of sanding units: 2 Number of loading stations: 6 Max material length: 1200 mm Max material width: 250 mm Max material height: 150 mm Feed speed: 17 m/min Capacity: up to 1800 pcs per hour Ideal for front and rear chair legs, bed components, and curved furniture elements Dedpfx Agex Azu Ej Rskg

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 4,250 mm, cutting height (max.): 120 mm, cutting width (max.): 4,100 mm, main saw diameter: 460 mm, power: 21 kW (28.55 HP), Machine type: fh6 430-410 / HT220 / MCS-Evolution / Win 10 Cutting length: 4,250 mm Cutting width: 4,100 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 125 mm Djdpfx Aslni T Eog Rskg Strip aligner before and after the pressure beam Air cushion tables: 3 pcs. (2100 x 700 mm) Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Automatic cutting length adjustment Scissor lift table: - Panel width: 2200 mm - Platform - Hydraulic unit - Max. Load: 6,0 tons - Push-off trolley - Rack and pinion drive - Frequency converter driven - Drive shaft - Push-off device: - Quantity: 2 pc(s) - For panel thicknesses ≥ 6 mm - Probe spindle for automatic package height adjustment - Floating - Cross alignment stop at the roller table - length: 1450 mm, measured from the saw line - solid box-type steel welded construction - alignment stop surface is precision machined - Book aligning device for longitudinal board edges - Quantity: 2 pc(s) - For pusher infeed - Raise- and lowerable aligning dog - Pneumatic operation - Counterholder: - Quantity: 2 pc(s) - For board thicknesses ≥ 6 mm This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 18 mm, We offer OSB boards here as Grade II (seconds). (The boards are only sold by the package. Individual boards cannot be purchased.) Scope of delivery: - OSB boards, Grade II - Total length: 2,440 mm - Total width: 590 mm - Thickness: 18 mm Dksdpfxsxxrn Uo Ag Rog - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 144 m² - Design: Tongue and groove - Quantity per package: 100 pieces - Base price per m²: €7.56 Notes: This is a special lot in Grade II, damage to the OSB boards may be present. Your contacts at our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information on the item: This item is only available for collection. Delivery or shipping is subject to additional costs, which can be provided upon request depending on the location and volume of delivery.

Year of construction: 2008, condition: ready for operation (used), Main Drive Spindle speed range 1500 - 18000 rpm Tool taper HSK F63 Additional Equipment Grooving saw Dksdpsx D R H Tjfx Ag Rsg Safety mats IMA Wop software + office license This IMA BIMA 300 was manufactured in 2008. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information. Application Types CNC Wood Machining

Condition: reconditioned (used), functionality: fully functional, Locatelli Miniariete 35 Automatic Lathes Maximum material length: 1000 mm Maximum machined material length: 100 mm Automatic material feeder Dkedpfx Asx Ar Ivog Rjg CE certificate Complete DTR technical documentation Main motor power: 3/4 kW

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,250 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.250 mm Cutting width: 4.300 mm Year of construction: 2008 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 300 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: up to 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 90 mm Push-off trolleywith 2 pcs. Push-off devices Book aligning device for longitudinal board edges Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction longitudinal - Recesses for forklift trucks Djdpfeqi Azpsx Ag Rjkg This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Year of construction: 2014, condition: ready for operation (used), Main Drive Number of axis 3 Dodpfex D Nitox Ag Rjkg This 3-axis IMA BIMA CUT 145/330 CNC Wood Machining Centre was manufactured in 2014. It features a working range of 3300 mm in the X axis and 1450 mm in the Y axis, with a spindle power of 18 kW. The machine includes a tool magazine with up to 18 positions and a vacuum clamping system for secure workpiece fixation. If you are looking to get high-quality milling capabilities, consider the IMA BIMA CUT 145/330 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 5,750 mm, cutting height (max.): 120 mm, cutting width (max.): 2,600 mm, main saw diameter: 460 mm, power: 27 kW (36.71 HP), Machine type: fh6 580 HT260 ERB-L / MCS-Evolution / Win 10 Cutting length: 5.750 mm Cutting width: 2.600 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 27 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 125 mm Lifting / lowering device for clamps Strip aligner before and after the pressure beam Air cushion tables: 1 pcs. (2100 x 700 mm) Turn table: 1 pcs. (5800 x 2200 mm) 90° turnable Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Machine table lips Automatic cutting length adjustment Lift table, max. panel width: 2600 mm Feeding roller conveyor: 7100 x 2600 mm Recesses for forklift trucks: 2 pcs Frequency converter for feeding roller conveyor Positioning stop: 2 pcs Push-off trolley Push-off device: 3 pcs Book aligning device for longitudinal board edges: 3 pcs Retaining device: 3 pcs Dksdpfx Agovx Ru De Rjg Roller table Cross alignment stop at the roller table This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 6200 kg Main Drive Spindle speed range 8000–24000 Number of axis 3 Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Z-Axis Movement 100 mm This 3-axis IMA BIMA 210 120/300 was manufactured in 2006. It features a large axis travel (X = 3000 mm, Y = 1200 mm, Z = 100 mm), accommodating workpieces up to 2800 mm in length and 1200 mm in width. The main spindle delivers power of 7.5 kW with speeds ranging from 8,000 to 24,000 rpm. It weighs approximately 6200 kg and includes IMA IMATRONIC CNC control. Contact us for more information about this machine. Application Types Djdpfxjx D Rt Hj Ag Rskg CNC Wood Machining

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans S45 Speed 420-320, Visioline Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2011 Saw blade projection max. (0°): 72 mm Saw blade diameter max .: 350 mm Main saw motor: 14 kW Scorer aggregate Scorer saw blade diameter max .: 180 mm Scorer aggregate, manually adjustable Package height max. (0°): 60 mm Saw aggregate forward: up to 100 m / min Dksdpfx Ask T Aw Seg Rsg Saw aggregate backward: up to 100 m / min Feeder: up to 120 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 6 pcs grip push clamp Regulation of clamp force at control desk stepless Number of stop jaw: 2 pcs Clamp opening: 82 mm Strip aligner before the pressure beam Air cushion tables: 3 pcs. 1800 x 600 mm Angular cutting device WSA Motor-driven cutting height adjustment for the main saw, infinately Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Formatting device This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Year of construction: 2009, operating hours: 8,500 h, condition: ready for operation (used), Main Drive Dkodpfx Ajx D Nlnjg Rsg Spindle speed range 5–20 This SORBINI SmartCoater SP1 was manufactured in 2009. It features a working speed of 5–20 m/min and can handle workpiece widths up to 1,350 mm and thicknesses up to 100 mm. It includes SUPERFICI UV lamps and a VENJAKOB conveyor belt, enhancing its efficiency in wood production. For more information about this machine, please reach out to us. Application Types Complete Production

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans s45 420 Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2005 Saw blade projection max. (0°): 70 mm Saw blade diameter max .: 350 mm Package height max. (0°): 60 mm Package height max. (45°): 38 mm Main saw motor: 7,5 kW Scorer aggregate Saw aggregate forward: up to 60 m/min Saw aggregate backward: up to 60 m/min Feeder: up to 60 m/min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Number of stop-jaws: 1 pcs Air cushion tables: 3 pc(s). 1800 x 600 mm Angular cutting device (WSM) This machine is in very good conditions and works very well. The machine will be maintained, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! Dsdpfjit N S Njx Ag Rskg

Year of construction: 2015, operating hours: 600 h, condition: ready for operation (used), Additional Equipment Roller Cooling This CEFLA Hotmelt SP1-EVO was manufactured in 2015. Ideal for woodworking applications, it ensures reliable performance for your projects. Consider the opportunity to buy this CEFLA Hotmelt SP1-EVO woodworking machine. Contact us for more information. Djdpjx D N Hfjfx Ag Rskg Application Types Other Woodworking Machinery

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3700 kg Main Drive Spindle speed range 24000 Dsdpfxex D Idio Ag Rekg Spindle motor power 8.5 kW Number of axis 3 Movement X-Axis Rapid Traverse 80 m/min Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 250 mm Z-Axis Rapid Traverse 12 m/min Tools Type of tool holder HSK 63F Additional Equipment Remote Control Pendant Z-axis Tool Length Sensor 4 Vacuum Suction Cups // 4 Additional Positioning Pins (long) Automatic Dust Shoe Height Adjustment // Automatic Part Pushing System Receiving Table for Finished Parts (2800 x 2070 mm) Loading Table (2800 x 2100 mm, 2000 kg Capacity, 500 mm Stack) CNC Control System TPA – WSCM Straight-line Nesting Software (Included) Pneumatic and Electrical Preparation for Drill Head Upgrades ECO Mode for Energy Saving This 3-axis INFOTEC 3121 PRO EVO was manufactured in 2022. It features a working area of 2200 x 3100 mm, Z-axis travel up to 350 mm, and a high-speed main spindle with a power of 8.5 kW and speed range up to 24,000 RPM. Equipped with a 14-position tool magazine and a robust vacuum table with 6 zones. Ideal for advanced CNC wood machining. Contact us for more information about this machine. Application Types CNC Wood Machining

Year of construction: 2003, condition: ready for operation (used), General Data Measurements width 2510 mm Measurements depth 1680 mm Measurements height 2180 mm Machine weight 8000kg aprox Additional Equipment 6-armed offload table PC + Monitor Electrical connection: 3x 63A, max. 15kW Pneumatic connection 1/2", 9 bar at least 400l/min Main supply line for pneumatics min. 3/4" Dkedpfjx D R Nujx Ag Rog This 4-axis HUNDEGGER Speed-Cut SC1, manufactured in 2003, is a universal machine center that offers advanced wood processing capabilities. It features computerized cutting, drilling, and milling with a maximum cutting height of 160 mm and width of 450 mm. The machine is equipped with a programmable controller for saw blade adjustments and a pneumatic clamping system, ensuring efficient material handling. The robust 4-axis CNC control enhances precision in operations. For more information about this machine center, please reach out to us. Application Types CNC Wood Machining