Used Wood Drying Machine for sale (67,723)

Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. The dehumidifier can also be used for drying cellars, construction sites, etc. Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting Pjdevrvmxjpfx Abpsgr - Good dehumidification even at low humidity - High efficiency for energy-saving operation - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Technical data: Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL woodturning lathe with a center distance of 800 mm. The demonstration machine is in its original condition, so you receive full warranty. Technical data - Center height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning device!) - Center distance approx. 800 mm (extendable!) - Spindle fitting M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale), trapezoidal-thread leadscrew - Motor: 2 HP - Weight: approx. 290 kg Pgodpstpxx Iefx Abper The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight forwarder: Austria: € 125 incl. VAT Germany: € 150 incl. VAT South Tyrol: € 180 incl. VAT Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, woodturning tools, wood spinning, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a nearly new Teknatool Nova Neptune 190 DVR woodturning lathe with a centre distance of 457 mm. The demonstration machine is in its original condition and comes with full warranty. Technical specifications: - Centre height approx. 190 mm - Max. centre distance 457 mm (optionally extendable!) - Spindle thread M33 x 3.5 with ASR (Euro) runout safety groove* - Spindle and tailstock taper: MK2 - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-step indexing function on the display - Motor: 1.5 hp (230 V) with forward and reverse operation - Tailstock quill stroke: 100 mm (with scale and handwheel with ball-bearing crank) - Four-prong drive centre, live centre, and double taper MK2 - Tool rest (upper tool rest) approx. 230 mm (with 25.4 mm post) Pgodpoyk Dtzofx Abper - Faceplate 80 mm with ASR (Euro) runout safety groove* - Assembled machine weight approx. 60 kg The machine can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €70.00 incl. VAT Germany: €80.00 incl. VAT South Tyrol: €100.00 incl. VAT Related terms: Lathe, woodturning lathe, turning machine, turning bench, turning, lathe chisel, woodturning, machine Reference: R-A0117

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings - Quill travel 150 mm (with scale) - Total length 1,780 mm - Weight 235 kg Pgodstpnddopfx Abpsr The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister STRATOS ECO woodturning lathe with a center distance of 680 mm. The demonstration machine is in original condition, therefore you receive the full warranty. Technical Data - Center height approx. 230 mm - Machining diameter approx. 455 mm (with optional outboard turning attachment up to 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle mount M33 x 3.5 with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection: 230 V) - Weight: 177 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipment rates: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: woodturning lathe, lathe, turning bench, woodturning bench, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117 Pedpfetpxt Rox Abpegr

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an almost-new Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The demonstration machine is in original condition, meaning you receive the full warranty. Technical Specifications - Center height: 280 mm - Swing over bed: 550 mm (expandable up to 1,000 mm with optional extension bed and outboard turning attachment) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (European) safety groove - Spindle and tailstock Morse taper: MK2 - Inverter drive (3 belt speeds): - Speed 1: 60 – 1,200 rpm - Speed 2: 100 – 2,200 rpm - Speed 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight carrier: Austria: € 125.00 incl. VAT Germany: € 150.00 incl. VAT South Tyrol: € 180.00 incl. VAT Pgedpfx Abjtpplnepjr If you are interested in this machine, please provide your complete address via the contact form so that we can process your inquiry professionally. Thank you, your NEUREITER Team Related Keywords: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, woodturning tools, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), SHOWROOM MACHINE Pgsdpfx Aetpn Nlobper We are selling our as-new Drechselmeister MIDI 1 wood lathe with a distance between centers of 400 mm. The showroom machine is in original condition, so you receive the full warranty. Technical Specifications: - Center height approx. 178 mm / Maximum turning diameter 355 mm - Distance between centers approx. 400 mm (can be extended with optional bed extensions) - 3 belt speeds / Infinitely variable speed regulation: 80 – 800 / 170 – 1,700 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-vibration profile* - Tailstock with MK2 quill (50 mm travel with scale!) - Motor 0.7 kW / 1 HP (230 V) with frequency inverter - Weight approx. 43 kg The machine is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Shipping by freight forwarder: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please provide your full address details in the contact form so we can process your enquiry professionally! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning tools, wood turning, turning machine Reference: R-A0117

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new TEKNATOOL Nova Nebula 230 DVR wood lathe with a direct drive offering speeds from 50 to 4,000 rpm. Pgjdpfjtpph Sox Abper The demonstration machine is in original condition, so you receive the full warranty. Technical specifications: - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove - Spindle and tailstock taper: MK2 - Variable speed control (direct drive): 50 – 4,000 rpm - 24-position indexing - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with graduated scale and trapezoidal thread) - Machine weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping by freight forwarder: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, lathe, turning machine, turning bench, turning, turning tools, woodturning, machine Reference: R-A0117

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. This showroom machine is in its original condition, so you receive the full warranty. Technical specifications: - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) Pgjdpfx Aotpnawobpor - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight, bench model: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg Pgedpfx Aetphy Ajbper The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE For sale: MIDI2 Plus lathe demonstration machine with a center height of 178 mm, including PRO DDMIDI-105 machine stand! Pjdpfx Aeu Szlzjbpogr The lathe has only been used briefly for demonstration purposes at Hödnerhof. Therefore, it is considered as new and comes with full warranty / guarantee. Technical Specifications: - Center height approx. 178 mm / turning diameter 355 mm - Distance between centers approx. 400 mm (expandable with optional bed extensions) - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-rotation safety groove* - Tailstock with interchangeable quill, 100 mm MK2, trapezoidal thread and measuring scale! (Optional: Interchangeable quill with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in Kuchl, A-5431. Subject to prior sale! (No shipping possible) Related terms: wood lathe, turning machine, lathe, woodturning, wood turning tools, woodturning, machine Reference: DDMIDI2-PLUS-VH

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a near-new Drechselmeister MIDI PRO benchtop wood lathe with a center distance of 450 mm. This demonstration unit is in its original condition and therefore includes the full warranty. Technical specifications: - Center height approx. 178 mm (swing over bed 355 mm) - Center distance approx. 450 mm (extendable!) - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) safety groove* Pedpfetpn Tlex Abpjgr - Tailstock with exchangeable quill MK2, 100 mm - Motor: 0.7 kW / 1 HP (230 V) - Forward/reverse operation - 4-prong drive center and live center MK2 - Tool rest 250 mm (shank 25.4 mm) - Faceplate 95 mm - Assembled machine weight approx. 67 kg - Weight of individual components (for easy transport, e.g. to markets): - Headstock 27 kg - Bed 26.4 kg - Tailstock 7.5 kg - Complete tool rest 6.2 kg The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Shipping via freight forwarder: Austria: € 60.00 incl. VAT Germany: € 70.00 incl. VAT South Tyrol: € 95.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, bench lathe, wood lathe, woodturning, turning tools, wood turning, machine Reference: R-A0117

Condition: as good as new (ex-display), DISPLAY MODEL For sale is an as-new Drechselmeister MIDI 2 PLUS lathe with a maximum turning diameter of 355 mm. The display model is in its original condition, therefore you receive the full warranty. Technical Data - Center height approx. 178 mm / Turning diameter 355 mm - Distance between centers approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection: M33 x 3.5 (taper MK2) with ASR (Euro) anti-release groove* - Tailstock with 100 mm MK2 quill, trapezoidal thread, and graduated scale! - (Optional: quill with ER25 collet system for drilling) - Motor: 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please provide your full address in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER team Related terms: woodturning lathe, lathe, turning machine, woodturning tools, wood turning, turning, machine Pgedpetpn Srsfx Abpjr Reference: R-A0117

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Pgjdpeyrm Hyefx Abpor Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Inspection possible by appointment.

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW Psdpfxovzuuto Abpegr

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. Pjdpfx Asxz Tfaobpogr - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: new, Year of construction: 2025, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Pgedev Dvkzjpfx Abpor Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Pgedpfew Uf S Hox Abpsr

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Pjdpjwd Irvefx Abpsgr Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Year of construction: 2022, operating hours: 321 h, condition: like new (used), KÄRCHER B300 Ri Diesel Ride-on combination machine: scrubber-dryer and sweeper This B300RiD was manufactured in 2022, has only 321 operating hours, and is in like-new condition. Pgjdelgv Nvspfx Abpjr - THE PRICE IS EXCLUDING 19% VAT! - Inspection/test drive is welcome. - Nationwide shipping can be arranged; costs depend on the distance. - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: used, functionality: fully functional, TASKI Swingo CO755 Automatic Cleaner and Scrubber-Dryer Pgjdpfxowlq Ebo Abpor (internal article no. REI_001) Name: TASKI Swingo Drive: ELECTRIC Hand-held Condition: see photos / good condition Manufacturer: TASKI Model: Swingo CO755 Electric-operated 24 V 600 W 100-240 V 50-60 Hz 300 W Max. 155 kg Year of manufacture Integrated charger Fully charged battery Self-propelled forward and reverse Charging current: 240 Scrub brush missing Price quoted upon pickup from warehouse 47441 Moers Various cleaners and scrubber-dryers in stock We offer as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. Further information about the item cannot be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment by phone. The item can be picked up immediately if required. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €150 net, depending on distance.) All dimensions are approximate.

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Pgedowfflvepfx Abpjr Condition: see photos / TOP condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 112902, Title: Intorex CNI 1500 CNC Control Lathe - 2015 Model Description: Experience precision engineering at its finest with the Intorex CNI 1500 CNC Control Lathe, a powerhouse of machining. Manufactured in 2015, this machine embodies reliability, accuracy, and efficiency, making it an ideal addition to any workshop or manufacturing facility. Key Features: Year of Manufacture: 2015 Psdpfxsr Tiuke Abpjgr Brand: Intorex Model: CNI 1500 Control: CNC Control Max. Turning Diameter: 300mm Diameter Max. Turning Length: 1500mm Inc. Drawing and programming Software IntorEDIT (easy to use) Additional Features: Adjustable Tailstock (12 & 18mm), Round steady (90mm Dia & 140mm Dia), 2 pneumatic centerers to facilitate the loading of the pieces Applications: Ideal for precision turning operations in Woodworking / Joinery Reason for Selling: Upgrading to newer equipment. Comes with rolling cabinet for accessories and tooling

Condition: new, Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Podpsitvfpjfx Abpsgr Weight 2000 kg Price 22450 Eur (EXW Jonava, Lithuania)

Condition: new, Type MJ1435F Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Cutting width 300 mm Cutting height 100 mm Pedpfed Nlvpjx Abpjgr Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.