Used Wood Chip Dryer for sale (10,739)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. Lodpfowp Rqfox Afaohc The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Lhodpow Uf S Hsfx Afajc

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Lodpfoq Igyvex Afaehc Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. Lsdpfx Aoq Nfuzjfajhc 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: like new (used), Very well-preserved, almost as-new KÄLIN grinding/planing machine. Year of manufacture 2009/2010, Type Caster IPC 6.000. The machine is in excellent condition and comes complete with all motors and accessories for the production of up to a maximum of 6 tons/hour of grinding wood. The system includes a Siemens S7 control, grinding equipment and grinder type SL 800, along with all planer heads and a set of spare cutter heads. Extraction system and complete conveying technology for chip transport are included. The machine has been professionally dismantled and is ready for immediate pickup. Storage location: Southern Germany. Inspection is possible at any time. Lhodpfjykmlmjx Afajc Sale by customer order.

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging Lhedpfomidtrsx Afajc -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Lodpfx Aoyhlrmefaehc

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Ledpfx Aevvmvfjfaohc

Condition: excellent (used), Wood chip silo with rotary extractor: - 56 panels 1500 x 3000 mm in 2.5 mm thick galvanized steel, distributed over 4 levels, supplied with 56 reinforcements and 42 junctions, bolted assembly, - Ø 6250 mm, - Height 12 m, 350 m3 volume, - Self-supporting roof with safety railing, - Caged ladder with a resting platform at 6 m, - 12 Atex vents, - 1 inspection door on the roof, - 1 Ø 480 mm inlet on the roof, - 1 discharge door 1200 x 2000 mm - 1 DENIS ECR 240 rotary extractor, all disassembled and palletized. OR - Silo without extractor for €30,000 excl. VAT Lhedjyhpzfspfx Afaec - DENIS ECR 240 extractor for €15,000 excl. VAT

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Lsdpfxoxwhw Aj Afaehc Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2003, condition: used, wood chip sieve Lhodpfsx Ta Nfsx Afasc

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Lhodpfxoyalblj Afajc

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Lhjdjya Ik Aspfx Afajc Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed) Lhedpfxsw Rpdro Afajc

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: Lhjdpfx Afoin Ewljajc - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, first registration: 07/1994, next inspection (TÜV): 05/2026, color: white, overall weight: 18,000 kg, front tire size: 255/70/22.5, empty load weight: 6,400 kg, axle configuration: 2 axles, suspension: air, loading space volume: 45 m³, tire size: 255/70/22.5, Equipment: ABS, lighting, Freudenau volume tipping trailer, 2-side tipper, left side with pendulum doors, right side fixed, approx. 45 m³, platform, sliding tarpaulin, SAF axles, 70% tires, German trailer from first owner. Sale only to business customers and with exclusion of any warranty. Loading possible. Ledpfx Afjx Ncrheaehc

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Lhedpfsr R Ewlex Afaec Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: excellent (used), Gisiger hammer mill currently GT Zesor AG, high-capacity, model USZ 1250 / 1950 manufactured by 355kW Additional sieves and hammers included Ledpfx Afjwcb Tkoajhc

Condition: refurbished (used), Wood chip screen IDL000756 Ledpfx Astmtf Refaohc - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. Lodpfx Afjtpxy Teaohc The machine is brand new and has not been commissioned.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation Lsdpfxexmrwfo Afajhc • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW Lhedowahhvepfx Afajc 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors Lodpjmuzq Esfx Afaohc • Boiler construction:   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Condition: used, For sale: KWB TDS Powerfire 45–150 kW Biomass Boiler – Versatile Wood Chip and Pellet Heating System The KWB Powerfire TDS 45–150 kW is a flexible and powerful biomass boiler – ideal for apartment buildings, commercial properties, or agricultural applications. Suitable for wood chips and pellets, it impresses with fully automatic operation and high efficiency across the entire output range. --- Key Features: Fuel: Wood chips / Pellets Power: 45–150 kW Fully automatic system with modulating output adjustment Industrial-grade, low-maintenance construction KWB – Austrian quality for commercial biomass heating PRICE: 7,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) --- Lhjdshikbuspfx Afasc Top Heating Systems – ProfiKazán Smart biomass heating solutions from leading Austrian manufacturers.

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Ledpfx Aettqd Nofashc Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.