Used Wood Dryer Wood Dry Chamber for sale (11,950)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. Dodpfxjtqlp Rj Ap Dowc The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification.

Condition: good (used), Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Dedpfoy Ti Ecox Ap Dswc Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) Dsdsvc Axpopfx Ap Dowc - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Dwsdpfx Apou Tipke Dec Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m Dwsdpezg Iw Iofx Ap Dsc - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Djdpfx Aoy Ny U Tjp Djwc

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating drying chamber / Wood drying chamber / Drying system Mühlböck QLSF2120 Technical data: Year of construction: 2007 Heating capacity: 190 kW Dsdpsy Sxw Eofx Ap Dswc Supply temperature: 95 degrees Electrical connection: 13A Fans: 6 x 0.75 kW

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying Chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7,400 x 4,500 x 4,250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points Djdpfx Aey Evkpep Dewc With frequency converter With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow: 14 m³/h Voltage: 230/400 V Connected load: 12 kW Fans: 3 x 3 kW Control: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating not included! The drying chamber will be professionally dismantled and loaded onto a truck. Transport dimensions: 12 loading meters, approx. 5,000 kg

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Display model. Like-new condition. We are selling a drying chamber powered by a high-efficiency gas burner, featuring an indirect system (no open flames) for heat exchange. Suitable for all types of wood, including softwood and hardwood, as well as pallets or firewood. Used only occasionally for demonstrations and drying cycle tests, and is 100% functional. TECHNICAL DATA Size: 50 m3 Power supply: Fraccaro 200 kW gas burner Intended use: Pallets Firewood Hardwood Softwood Condition: Like-new Special features: Indirect flame burner for maximum safety Structure materials: Aluminum Steel Rock/GLASS wool Dwodpfx Apsyyb Nyo Djc Control system: Fully customizable Remote control Number of fans: 4 Temperature range: 20-75°C

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Dedpfxjxgdrbe Ap Dswc

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. Dwedpfx Ajq Nfuzsp Djc 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2021, condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Input of one about 100 m3 - total 300 m3 Dwedpfxsvkxmfe Ap Djc Dryers used only for tests - practically new. Complete with full documentation, automation, laptop and internet connection (remote control).

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Dsdpfx Aoy R Tdwep Dswc

Condition: reconditioned (used), functionality: fully functional, power: 44 kW (59.82 HP), overall weight: 70,000 kg, total height: 5,400 mm, total length: 22,200 mm, total width: 5,400 mm, Rotary Drum Dryer Dutch Dryers - DX 3000 Rebuilt in 2021 Motor power 2 x 22 kW Drive chains and sprockets new Dsdsyxm E Ropfx Ap Dswc Frequency inverter new Can be disassembled into 6 parts Total weight approx. 70,000 kg Hardly any signs of wear

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Dwsdpfx Apsyb Rpdo Djc Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Dwedpozw Apgsfx Ap Dec Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. Dwodpfx Apsz Dz Rte Dec cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában. Djdpfeua D U Ijx Ap Dewc

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Dsdezyk D Dopfx Ap Dewc Designation: ZLSM-5x1.20-1x3.10-07.72-2-F The drying chamber was designed for drying wooden pallets. Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Heating capacity per chamber: 400kW The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. The drying chamber is sold as defective and incomplete. Inspection is absolutely necessary!

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 0 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 60 °C, inner dimension length: 12,500 mm, inner dimension width: 1,750 mm, inner dimension height: 2,000 mm, total length: 13,000 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Good convection drying chamber with axial airflow, fan, and heating coil at the top and rear. Can be inspected at any time. Dwodpfxozz Sapj Ap Dsc Functional.

Condition: reconditioned (used), Year of construction: 2026, machine/vehicle number: 559, functionality: limited functionality, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74 Dwedpfsya Ik Aex Ap Doc

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Dedpfxeztvf Te Ap Dewc Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials Dwjdpfoq Igyvsx Ap Doc - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: excellent (used), solid fuel furnace for supplying heat to the drying chamber. production of heating pellets. capacity: 2.5 tons per hour. Dwsdpfx Aozn Au Rop Doc

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Dwsdpfxjz Alhis Ap Dsc Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.