Used Wood Engraving Machine for sale (65,228)

Condition: like new (used), Year of construction: 2012, operating hours: 10 h, functionality: unexamined, machine/vehicle number: 50022358, laser power: 200 W, overall weight: 1,000 kg, The machine has never been in operation and is therefore like new. I have never started it myself, so I cannot say much about it. If the buyer is familiar with the machine, it may be possible for us to connect it to power before purchase. Rsdpfx Asx It Abeg Njp

Condition: used, Year of construction: 2016, Laser type: PowerLine F100 Technical data: Travel distances of linear axes X/Y/Z axis: 800 / 300 / 300 mm Max. workpiece weight: 30 kg Heating, Ventilation, Air Conditioning: Operating temperature: 25°C +/- 10°C Storage temperature: 5°C to +40°C Ambient conditions: non-condensing, non-corrosive, frost-free Air electrical section: 160 m³/h Pneumatic supply: Medium: filtered, oil-free compressed air Max. permissible operating pressure: 6 bar Temperature range: -10° to +60°C Laser safety class: Laser Class 1 according to EN (IEC) 60825-1:2007 Marking field size of the laser: 120 x 120 mm Operating and storage conditions: Floor load capacity: min. 500 kg/m² Clearance above: 2 m for ventilation Transport height: min. 2 m Room height: min. 2.50 m Electricity: Input fuse (protection): 3 x 16 A Nominal voltage: 400 V (+/-10%); 3P; N; PE Nominal frequency: 50/60 Hz; neutral conductor loaded Power consumption: 4 kVA (at 50 Hz) Size and weight: Width1): 1.50 m plus swivel arm max. 0.8 m (width without monitor) Length1): 1.80 m plus swivel arm 0.5 m (length without monitor) Height standing workstation: 1.20 m Working height: 0.96 m (standing workstation) Required space and volume 2): Width: 3.00 m Length: 2.50 m Rjdpfx Asxqp Rdsg Nop Height: 2.20 m (standing workstation) Area: 7.50 m² Weight, approx.: 1500 kg 1) Width, length, and area of the laser processing machine may vary depending on the adjustment of the optional swivel arm. 2) The necessary space and volume do not include potential aisle space! The operator must define the safety distances around the machine in accordance with national occupational health and safety regulations. Operating and storage conditions: - No direct sunlight - Do not place near radiators - Avoid strong temperature fluctuations - Do not install in areas with high dust levels - Do not install in areas with high levels of oil, solvent, or cleaning agent vapors

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, table length: 600 mm, table width: 1,000 mm, overall weight: 300 kg, total width: 1,480 mm, total height: 900 mm, warranty duration: 1 months, Equipment: documentation/manual, fume extraction, type plate available, Technical specifications: - 80 Watt Synrad CO2 laser source - Machine dimensions: 1480x900x1120 mm - Working area: 1000x600 mm Rodpfxoxvb Eke Ag Njp - Max. workpiece height: 230 mm - Aluminum honeycomb cutting table with vacuum function - 2'' focus lens incl. focusing gauge and nozzle - Optional lens set: 1.5'' focus lens - 2.5'' focus lens - 4'' focus lens - Clean-Tech dust protection system - Servo motors (max. 3.2 m/sec) - Autofocus with Microsonic sensor - Assist air incl. compressed air compressor - LED interior lighting - Laser class 2 - Power supply 230V - Weight 300 kg - JL Cockpit laser software - JustAir POR extraction system to JL 10.6 extraction with 640 m³/h performance

Condition: not inspected (used), functionality: unexamined, total width: 700 mm, total height: 1,100 mm, total length: 900 mm, overall weight: 70 kg, table length: 400 mm, table width: 150 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. By placing a bid, you are obliged to collect the item on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Rodpfxsxqcare Ag Nop Table dimensions: 400 mm x 150 mm MACHINE DETAILS Dimensions (L x W x H): 900 mm x 700 mm x 1,100 mm Weight: 70 kg

Condition: used, SAGA HFVD45-SA 4.5 m³ wood vacuum drying chamber 3 phase, 380V, 50Hz-40KVA OUTPUT POWER: 30 kW TANK DIMENSIONS: 5700 * 2150 * 2000 mm STACKING SIZE: 4500*1000*1000 mm Stacking capacity: 4.5 m³ INTERNAL DIAMETER: Φ1.7m Manual feeding, automatic feeding with motor HYDRAULIC PRESSURE: 3 tons (2 units) Rjdpow Ac Hfjfx Ag Nop VACUUM PRESSURE: -0.093 MPa. Motor Power: 7.5 kW

Condition: new, Year of construction: 2025, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm Rodevk Saxepfx Ag Nsp - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x900x1900 mm Weight 800 kg Rjdpev A Hcxofx Ag Nop Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 940x1250x1400 mm Rjdpfx Agov A Hb Ue Nop Weight 250 kg Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2100x1800 mm Redev A E R Ijpfx Ag Njp Weight 1700 kg Total power requirement 7,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x1100x1500 mm Weight 300 kg Rodpsv A Hb Iofx Ag Njp Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x2000x1950 mm Rsdpfx Agsv A E Slo Nop Weight 700 kg Total power requirement 11 kw

Year of construction: 1969, condition: good (used), Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rodpfeidckfjx Ag Njp Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: cabin, crane, Baljer & Zembrod OBX IV Rsdov Tk I Hopfx Ag Nep Reach 13.30m Load capacity 2500kg at 13.0m

Condition: new, Year of construction: 2025, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery -30% OFF PROMOTIONAL machines in prompt delivery CE regulation: YES Rjdpfx Ash U A Uajg Njp EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease Rsdpsxc Rmqjfx Ag Nop - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X / Y / Z: 3,000 / 2,000 / 200 mm Accuracy: 0.01 mm Redpfx Agewgbtlo Nop Spindle Spindle power: 3.0 kW Spindle speed: 0 - 18,000 rpm, variable Spindle diameter: 3.175 - 12.7 mm Spindle cooling: air Working area and equipment Maximum material height: 120 mm Work table size: 3,000 x 2,000 mm Extraction table: 5.5 kW double stage, divisible into 6 zones Felt carpet thickness: 4.5 mm Plotter equipment 1st head: 380V 5.5 kW water-cooled electric spindle 2nd head: Electric oscillating knife 3rd head: Rolling tool EQUIPMENT - PC Includes machine control software and Ethernet interface - Supported file formats: vector formats, DXF, G-code - Camera for detecting print marks - Extractor with dual filter and 3.0 kW motor - Extraction tube and collector for the spindle

Condition: used, Year of construction: 1994, x-travel 0 mm y-travel 0 mm z-travel mm Rsdpfst Hw Dqox Ag Nep total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Marking machine for cylindrical parts, rotary table, 4 axes, PV 70 Head

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports Rodpfx Agew Tfxdo Nep 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Year of construction: 1985, condition: used, 1 branded engraving machine make KUHLMANN type GM I-I Rjdpok Tt Axefx Ag Nsp working area: 320 x 200 x 280 stencil table 500 x 400 mm, working table 500 x 200 mm 3D shape engraving device TGV - plate engraving device Div. stencils and type sets Div. engraving gravers Speed range 4.200 - 20.000 min-1 Space requirement approx. 1.2 x 1 x 1.5 m Weight approx. 250 kg

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm Rsdpfexbh E Uox Ag Nop axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min tool taper SK 30 table load max. 100 kg Weight ca. 500 kg

Condition: like new (used), Year of construction: 1971, Machine is in good working condition. Redpfx Aok Rar Eog Njp

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Rodpfxod Dhw Ns Ag Njp

Condition: used, machine/vehicle number: 0001210226, pattern table size: 236 x 460 mm working table size: 200 x 500 mm working area longitudinal: 300 mm working area cross: 160 mm Redpfx Aobv S Elsg Nep spindle turning speed range: 1900 - 15000 rpm milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm space needed: 800 x 900 x 1250 mm weight: 340 kg

Condition: good (used), x-travel 300 mm y-travel 160 mm z-travel 360 mm Total power requirement 1 kW Rodpfx Aew U Shhjg Nep Machine weight approx. 0.8 t various engraving kits

Condition: new, Year of construction: 2025, A laser marking machine is an invaluable part of a production. Wattsan FL TT can mark or engrave QR codes, serial numbers, dates, and any picture you want onto items. This laser marker works with metals and their alloys. Plastic, fabric, leather, glass, and other materials are also within reach of a laser. The marker’s tripod can be removed and mounted on the ceiling, allowing you to operate work items of any size! Wattsan FL TT comes with the EzCad system, which allows you to edit text in real time. It also supports vector, bitmap, BMP, PLT, CDR, DXT, and AI formats, among others. You can give our managers a call for additional details! Wattsan FL TT characteristics: Working area: 300x300, 110x110, 200x200 mm Laser power: 20-100 W Rjdoh Uc Dbepfx Ag Nsp Machine size: 740x400x740 mm Packing size: 820x490x850 mm Weight: 54 kg Laser sourse: RAYCUS, JPT (MOPA), IPG, MAX Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.