Used Wood Lathe for sale (11,675)

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 284 mm turning dia. over face-slide: 380 mm turning length: 381 mm x-axis: 153 mm longitudinal traverse (z-axis): 406 mm control: Siemens 810D revolution per minute: 5000 U/min spindle bore: 52 mm Credpezrlvljfx Abxof tool turret - number of stations: 12 Stationen / Stations operating hours - idle run: 78000 h electrics - voltage/frequency: 400/50 V/Hz total power requirement: 11 kVA Weight approx.: 2,8 t dimension machine approx.LxWxH: 3,0 x 1,6 x 1,8 m

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 95950 € 1813.46 € 630 mm 2000 mm 85 mm 400 mm 350 mm D1-8 1/16 MK 3 37 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13.5kW (S1 / S6 40%) kW X: 0.02 Z: 0.04 mm X: 0.01 Z: 0.035 mm ISO3655 3840 mm 1905 mm 2235 mm 4200 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function Csdpfx Abszcqx Usxjrf • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard with sliding door and window Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret (VDI, slot type o BMT version), optionally with driven tools Electrically rotatable 4-station tool holder Chip conveyor High-pressure coolant pump Further options on request ALTERNATIVE: FCL-2540 variant with 1000 mm centre distance FCL-2560 variant with 1500 mm centre distance

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 87350 € 1650.92 € 540 mm 1500 mm 85 mm 310 mm 350 mm D1-8 1/20 MK 3 27 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6 40%) kW 0.02 mm 0.016 mm ISO3655 3340 mm 1905 mm 2235 mm 3400 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard with sliding door and window Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck Credpozbvabjfx Abxjf 8-station turret (VDI, slot type o BMT version), optionally with driven tools Electrically rotatable 4-station tool holder Chip conveyor High-pressure coolant pump Further options on request ALTERNATIVE: FCL-2140 variant with 1000 mm centre distance FCL-2180 variant with 2000 mm centre distance

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 77850 € 1471.37 € 460 mm 1000 mm 56 mm 230 mm 350 mm D1-6 1/20 MK 3 33 - 3100 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6-40%) kW 0.02 mm 0.01 mm ISO3655 2840 mm 1905 mm 2235 mm 2900 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation Csdpozbu U Refx Abxjrf • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software With precision bearings ensuring spindle runout of less than 0.005 mm, for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis. 2-axis AC servo motors 20-160 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard. Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret(VDI, slot type o BMT version) Chip conveyor High-pressure coolant pump ALTERNATIVE: FCL-1860 variant with 1500 mm centre distance

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Chinese company Sumore, model SP2114. I rate the condition of the machine as very good. It has high rigidity and accuracy. The machine is connected and ready for operation. We provide on-site machine loading. Spindle bore: 58 mm Lathe chuck: 250 mm Turning length: 1500 mm Turning diameter over the bed: 460 mm Turning diameter over the carriage: 260 mm Tailstock spindle: MK 4 Minimum speed: 25 rpm Maximum speed: 2000 rpm 12 spindle speeds Codozqt Dzepfx Abxsrf Steady rest: fixed and traveling

Condition: excellent (used), Catalog number: 8012 TECHNICAL DATA - inlet width: 420mm - inlet height: 270mm - shaft width: 410mm - shaft diameter: 450mm - number of knives: 2 rows of 7 pieces each - screen dimensions: 50x70mm - toothed pull shaft (bottom) - lower shaft motor: 1.1kW - toothed pull shaft (top) - upper shaft motor: 1.1kW - main motor: 45kW - feed direction: forward/backward - auto-reverse - additional screen: 10x10mm - diameter of the extraction outlet: 330mm - vibrating screen: 1.1kW, 3300x400mm - overall dimensions of the vibrating screen: 3340x630x620mm - machine dimensions (length/width/height): 2310x1040x1000mm Crodpfx Abjzp Na Ajxjf - weight: approximately 1800kg ADVANTAGES – German-made – auto-reverse (with adjustable settings) – with 3300mm vibrating screen – DTR documentation – used shredder, good condition Net price: 66900 PLN Net price: 15929 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Technical data: - Size: 10x60 - Per set: approx. 200 pieces - Condition: as new Cjdpfxezry Atj Abxjrf - Available: 5 sets

Condition: used, Stock of wood drill bits in mint condition, new or second-hand, mainly in sizes 10, 13 and 26 mm. Remaining stock of a double-ended profiler with drilling units. Csdpfszrygrsx Abxsrf

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Technical data: - Centre-to-centre distance: 1,300 mm - Centre height: 250 mm - Motor: 1.4 kW Csdpfjzrx Saox Abxorf

Condition: used, Holzkraft HSE 5-520 KH log splitter for the convenient and safe splitting of short logs for domestic or semi-professional use. Its compact design and ease of use enable efficient work even in confined spaces. Ideal for preparing firewood. Technical data: - Splitting force: 5 tonnes Csdpfx Abezrx E Hexjrf - Length of material to be split: max. 520 mm - Diameter of material to be split: max. 250 mm - Power source: 230 V electric - Weight: approx. 50 kg

Condition: good (used), Year of construction: 2001, CNC lathe Daewoo Puma 230 SA – Year of manufacture 2001 Controlled axes: 3 (X – Z – B) Cedpezr Hfnefx Abxerf Numerical control: Fanuc Series 18-T Max. turning diameter over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mounting: ASA A2-6" Chuck: 2 x collet chucks Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW X-axis travel: 205 mm Z-axis travel: 580 mm Turret: 12 positions Live tooling Chip conveyor: included Bar loader, 3-meter bar capacity Machine weight: 4,240 kg

Condition: good (used), Year of construction: 2007, CNC - lathe machine Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year: 2007 SPECIFICATIONS Max. turning length: 1.055 mm Turningdiameter: 120 mm Max. swing over bed: 285 mm Rapid motion: (X/Z): 20 m/min Main Spindle Max. revolution: 3.500 rpm Spindle power: 7,5 / 5,5 kW Bar capacity: 43 mm Spindle nose: A2-6 Amount of turrets: 2 Tool capacity: 6 + 6 Tool: Capto Tailstock Quill diameter: 85 mm Quill: MK 4 Csdpfx Abozinn Ejxorf quill range: 70 mm Tailstock cross travel: 520 mm Steady rest: hydraulisch Steady rest: SMW SLU-1-Z Equipment Chip conveyor Cooling pumps Tool setter

Condition: excellent (used), Year of construction: 2007, Please read the technical specifications completely. If this machine is of interest to you as a potential investment, we kindly request that you provide your complete contact information, including a correct phone number and email address, so that we can prepare a quotation. !!! THIS MACHINE IS CURRENTLY UNDERGOING RECONDITIONING !!! THE IMAGES DO NOT DEPICT THE MACHINE BEING OFFERED BUT SHOW A RECENTLY RECONDITIONED MACHINE WITH A SHORTER TURNING LENGTH !!! We are offering an exceptionally good precision lathe. This machine is likely the best German lathe ever built in its class. BOHEHRINGER precision lathe, model DUE 560 Year of manufacture: 2007, including CE marking and central lubrication Center height: 280 mm Swinging diameter over bed: 560 mm Swinging diameter over cross slide: 315 mm Crsdpfx Aow Rdthjbxof Distance between centers: approx. 2,000 mm Bar capacity: 62 mm Spindle head: DIN 55027, size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 speeds: 11.2 – 2,240 rpm 60 cross-feed steps: 0.03 – 28 mm/rev 60 longitudinal feed steps: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MK 5 Footprint: L x W approx. 4,30 x 1,525 mm Weight: approx. 4,600 kg Accessories: - 3-axis digital display HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip guard back panel - 3-jaw chuck T 250 mm incl. various jaws - Roller conveyor cover for lead screw support to bed - Machine light - Multifix C + 3 tool holders - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and optical condition. Backlash in the cross slide approx. 0.2 mm and in the top slide approx. 0.15 mm Spindle taper runout approx. 0.006 mm Geometry of the machine bed: deviation approx. 0.01 mm over approx. 750 mm of bed length (measured on the flat guide with a dial gauge towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New scrapers - Replacement of various wear parts - Complete repainting of the machine and technical functional check Available from approx. the end of September 2026 Price net, ex works. Delivery with our own truck can be offered for an additional charge.

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm c-axis 0,01° ° speeds 10.000 U/min rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) Cedpfx Aozrh Ecsbxsrf total power requirement 5,5 kW weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; ± 115° ; 8000 rpm; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: -20+50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW TOOL MAGAZINE: CHAIN-TYPE ; 40 POS HIGH PRESSURE COOLANT: 25 Bar Cedjzqwf Ajpfx Abxerf CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Year of construction: 2016, condition: ready for operation (used), - USED - TEACH-IN LATHE CENTRE HEIGHT: 180 mm DISTANCE BETWEEN CENTRES: 1000 mm MAX TURNING DIAMETER OVER BED: 360 mm MAX TURNING DIAMETER OVER CARRIAGE: 335 mm BAR CAPACITY: 42 mm BED WIDTH: 250 mm SPINDLE: 4000 rpm; 5,5 kW; CAM LOCK 5" ; 200 mm RAPID FEEDS X-Z: 10 - 10 m/min TAILSTOCK TAPER: CM 3 QUILL DIAMETER: 48 mm QUILL TRAVEL: 140 mm CONTROL UNIT: FANUC Series 21i-T WEIGHT: 1490 Kg Credpozqwgaefx Abxof OVERALL DIMENSIONS: 2520 x 1170 x 1820 mm ACCESSORIES: STEADY REST ; RS 232 SERIAL PORT NOTE: COROMAT CAPTO TURRET HEAD

Condition: used, Lathe chucks and holders (VDI 30/40/50) from PLN 5/piece on request Crodpfx Aoy H Ezgebxef

Condition: used, Distance between centers 750 mm greates pass round over bed 400 mm swing diameter over slide rest 230 mm bed width 300 mm spindle bore 51 mm spindle tunring speed 66 - 2.000 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; Codpfxszrh Rfj Abxorf subject to prior sale.

Condition: excellent (used), Year of construction: 1983, Faceplate diameter: 1250 mm Max. swing diameter: 1400 mm Max. swing height: 1160 mm Max. ram stroke, vertical / horizontal: 755 / 840 mm Table load capacity: unlimited Faceplate speed range: 5.6 - 300 rpm Vertical slide angular adjustment: 45° Feed rate range: 0.044-8 mm/rev Rapid traverse rate: 2 m/min Drive power: 55 kW Footprint L x W x H: 2660 x 2710 x 3360 mm Total weight: 16,500 kg Accessories / Special features: • 2-axis digital display, manufacturer: ACU-Rite • Faceplate, Ø 1250 mm, with 4 chuck jaws • 5-position turret • Taper turning • Profile turning Siegfried Volz Werkzeugmaschinen Crodpfx Asy Ex Epobxjf Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Long Service Life The professional 8-ton log splitter is designed for efficient wood splitting with maximum reliability and durability. Its solid construction and high-quality splitting wedge ensure long service life and trouble-free operation. The machine is intended for splitting logs with a diameter of up to approximately 450 mm. Its stable and robust design provides excellent performance and consistent results. The splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Device description Side support tables included – make feeding and positioning logs easier. Powerful and reliable 230 V electric motor – rated power of 3.0 kW, with temporary power increase up to 3.5 kW during heavy-duty operation. Safe operation compliant with EU standards – equipped with a two-hand control system for increased operator protection. Hydraulic system filled with 4 litres of oil – the machine is ready for immediate operation after purchase. Angled splitting wedge – improves wedge penetration into the wood. 4-way splitting wedge included as standard – allows splitting logs into four pieces in a single operation. Adjustable stop rod – allows the return height of the wedge to be set according to user requirements. Hydraulic oil level indicator – enables easy monitoring of the oil level. Transport wheels – provide convenient movement of the machine. Operating manual included. Comfortable transport handle – simplifies handling and relocation. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and maintenance-free operation. Crodjridpaspfx Abxjf Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge feed speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Reliable Performance The professional 8-ton log splitter is designed for efficient and safe wood splitting. Its solid construction and high-quality splitting wedge ensure long service life and reliable operation. The machine is designed for splitting logs with a diameter of up to approximately 450 mm. Its stable and durable construction guarantees excellent working results even under demanding conditions. The log splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Csdpfx Aewymwcobxsrf Device features Side support tables included – make loading and positioning logs easier. Reliable and powerful 230 V electric motor – 3.0 kW power, with the ability to temporarily increase output up to 3.5 kW during heavy loads. Safe operation compliant with EU standards – equipped with a two-hand control system for maximum operator safety. Pre-filled hydraulic oil system (4 litres) – ready for immediate use after purchase. Angled splitting wedge – improves penetration into the material and reduces splitting resistance. 4-way splitting wedge included – allows logs to be split into four pieces. Adjustable stop rod – enables setting the wedge return height according to the user's needs. Hydraulic oil level indicator – allows quick monitoring of the oil level. Transport wheels – provide convenient mobility. Operating manual included. Comfortable transport handle – makes moving the machine easier. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and trouble-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge travel speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 7041231, turning diameter: 65 mm, spindle bore: 65 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 450 mm, overall weight: 5,000 kg, Manufacturer: TRAUB Type: TNC 42/65 Year of manufacture: 2007 Control system: TRAUB System TX8i Description: For sale is a TRAUB TNC 42/65 CNC turning machine with twin spindle, Y-axis, powered tools, and LNS Quick Load Servo III bar feeder. The machine has extensive equipment and is suitable for complete machining of turned and milled parts in a single setup. Crjdezrl E Topfx Abxjf The machine is in working order. Due to its age, it is sold without warranty. The condition has not been further assessed and is therefore explicitly offered as used. An inspection while the machine is powered on is possible by appointment. Equipment: - Twin spindle - Main spindle and counter spindle - C-axis main spindle - C-axis counter spindle - Y-axis - Powered tools - VDI tool turret - High-pressure coolant system - LNS Quick Load Servo III bar feeder - Chip conveyor - Memory expansion of the control system to 4 GB - Accessories - Extensive collet assortment - Reducing sleeve - Several reducing rings in various diameters - Additional VDI tool holders - Various spare parts in boxes Known issues: - The telescopic covers have damage, but they still perform their function. - The memory of the control system has been expanded to 4 GB. - Sale due to machine replacement.

Condition: repair required (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Traub TND 550, year of manufacture 1993 Operating hours: approx. 40,000 h The machine is currently in daily use and is generally functional. The following known defects exist: Gear shifting is not functioning. The machine is permanently in gear 2 (speed range up to approx. 3,200 rpm). Driven tools are not functioning. The tailstock is operated via an added toggle switch. The turret only moves or changes position at a very slow speed. The ball screw of the X-axis causes running noises. The ball screw has exhibited the aforementioned running noises since the machine was purchased in 2021. Despite this, H7 fits could still be reliably manufactured. The cause of the aforementioned defects has not been conclusively investigated. Information on possible causes of the defects is therefore provided without guarantee. Csdpfx Aezd Udiobxsrf The machine is sold as used, with the exclusion of any warranty for the mentioned defects as well as any other possible defects.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 712 mm, turning length: 930 mm, turning diameter: 712 mm, travel distance X-axis: 450 mm, travel distance Z-axis: 930 mm, spindle motor power: 7,500 W, rotational speed (min.): 40 rpm, rotational speed (max.): 1,800 rpm, total height: 2,000 mm, total length: 2,420 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,200 kg, Equipment: documentation/manual, Special Offer – 5% Discount Available! CNC Wheel Repair Lathe MTP28 The MTP28 CNC Wheel Repair Lathe is a professional machine designed for the refurbishment, repair, and precision machining of alloy wheels from 12" to 28". Equipped with an advanced CNC control system, it delivers outstanding machining accuracy, excellent surface finish, and consistent repeatability. It is the ideal solution for wheel refurbishment specialists, automotive workshops, and alloy wheel repair centers. The machine features an automatic wheel probing system that quickly scans the wheel profile and simplifies programming, significantly reducing setup time and increasing productivity. Its intuitive 15-inch touchscreen CNC controller makes operation simple and efficient. A fully enclosed working area, rigid machine construction, and powerful 7.5 kW spindle motor ensure maximum safety, reliability, and long service life, even during intensive daily operation. Standard Equipment * CNC control system with 15-inch touchscreen * Automatic wheel probing system with dedicated software * Fully enclosed safety enclosure * 12-inch 3-jaw chuck Technical Specifications Codpfx Ajzf Immsbxjrf * Wheel size range: 12"–28" * Maximum wheel diameter: 712 mm * X-axis travel: 450 mm * Z-axis travel: 930 mm * Chuck: 12-inch 3-jaw chuck * Spindle motor power: 7.5 kW * Spindle speed range: 40–1800 rpm * Rapid traverse (X-axis): 5 m/min * Rapid traverse (Z-axis): 7 m/min * Cutting feed: 0–200 mm/min * Bed width: 400 mm * Machine dimensions: 2420 × 1700 × 2000 mm * Machine weight: 3200 kg Key Features * Professional alloy wheel refurbishment and repair * High machining accuracy and repeatability * Automatic wheel surface probing * Suitable for wheels from 12" to 28" * Easy-to-use 15-inch touchscreen CNC control * Heavy-duty industrial construction * Fully enclosed and safe working area * Low operating costs * High productivity and excellent surface finish Transport & Delivery We provide professional transport and delivery throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, properly protected, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements to ensure safe and efficient delivery. Worldwide shipping outside Europe is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery, supplying reliable equipment to customers throughout Europe. We provide expert technical advice, machine configuration, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm spindle bore 70 mm spindle turning speed range 1 - 3000 U/min feeds - cross 0,001 - 1000 mm/U feeds - longitudinal 0,001 - 2000 mm/U rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm tailstock quill taper MT 5 Cedpfxozr Hdqj Abxjrf main drive (40 % ED) 25 kW weight of the machine ca. 2,9 t Additional information * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2 * Roller guide for easier movement of the tailstock * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools