Used Wood Mortising Machine for sale (85,634)

Condition: used, Year of construction: 2006, Machine including brand new 2-jaw chuck Machine cleaned, lubricated, partially overhauled, test run performed Drill chuck replaced. Chuck runout: 0.03 mm Used, top condition, low operating hours Make: Hofmann Model: LB 760 Year of manufacture: 2006 Machine no.: 76-01420 CE type-examined Motor: 1.8 kW, 2 speeds Table size: 760 mm Drill capacity: 0–20 mm Drill chuck: 20 mm Dowel boring device with 4 position stops Workpiece stop Mitre stop 45° Centre stop Motor speed: 2 settings (1500/3000 rpm) Fjdow Ed Uijpfx Ag Rsft Digital height display Manual workpiece clamp, 1 x with 2 columns Extraction connection: Ø 120 mm Space requirement: approx. 1300 x 1200 x 1400 mm Weight: approx. 260 kg Location: 97447 Gerolzhofen, free loaded, unpackaged Delivery in as-inspected condition, without guarantee or warranty.

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Dimensions WxDxH (mm) : 2300x1700x2600 Fedpfx Ageulfuzj Reft Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: used, Year of construction: 1995, with pneumatic lift for drilling on 2 levels used, excellent condition, low hours Manufacturer: Hoffmann Model: HR 150 Year of manufacture: 1995 Machine no.: 15201 Fedpfx Agjw Ed Ucj Rsft CE type tested Drill chuck: 16 mm Dowel drilling device with 1 piece indexing guide Workpiece stop Mitre gauge 45° Center stop Mobile Pneumatic lift Digital displays Pneumatic workpiece clamps, 2 pcs Space requirements approx. 1200 mm x 900 mm x 1300 mm Weight approx. 350 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without guarantee or warranty

Condition: used, incl. 7 chain sets pneum. air suspension used, top condition, lots of accessories Wigo brand Stand machine Ffsdevvnmljpfx Ag Ret Chain set 7 pieces Door support Workpiece support can be swiveled down - tilted for wedge-conical holes Suction connection D 60 mm Space requirement approx. 1100 mm x 700 mm x 2000 mm Weight approx. 350 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Fsdpfxevwgayo Ag Roft

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Ffjdpfx Ajvwf H Ejg Ret

Condition: used, Door lock mortiserused, good conditionmanufactured by Haffnertype SL 100stand machinechain set 12 - 17 / 50 x 150 mmworkpiece resthandle hole motorface-plate motorlubricant unitmechanical workpiece clampingrequired space ca. l x w x h mm1500 x 900 x 2010located in  97447 Gerolzhofensale in current condition as seen- free on truck - Ffjdevwfv Tepfx Ag Ret

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Ffjdpfevwfr Iex Ag Rst

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Fjdpevwfrzofx Ag Rjft

Condition: used, Door lock milling machineused, good conditionmake Haffnertype SL 100machineNo. 2269upright machinechain setdoor supportworkpiece supportpusher hole motorforend motorlubricatorsuction connection D 80/100 mmspace requirement approx. 1200 mm x 700 mm x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Fodpfxsvwfmfo Ag Rjft

Condition: new, - NEW -Standard equipment:Motor 1.5 kWSpindle speed 2880 rpmMax. Spindle height above the table 160 mmMax. Drilling stroke 345 mmMax. Cross stroke 245 mmSpindle stroke 160 mmDrilling capacity 0-20 mmMax. Tool length 175 mmEccentric clamp 1 pcRotatable machine table 800 x 400 mm /- 45°Pivotable / rotatable drilling unit as optionTiltable machine table as optionMachine dimensions 1500x1100x950 mmMachine weight 345 kgincluded:- Suction nozzle no. P41 55- 2nd clamping eccentric no. P41 25- Dowel drilling device with 4 grid dimensions no. P41 20- Single lever operation- 2 speeds 1.5/1.9 kW 1440/2880 rpm no. P41 07- Digital display of spindle / drilling height no. P41 34 Ffsdpfevwflzsx Ag Ret

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Ffsdpfjvwfiajx Ag Rst

Condition: used, with rotatable mortizing unit /- 90 ° and inclinable supportincl. many chain setsused, top conditionmake Bäuerlewall machinechain set 12-17 50 x 175milling unit rotatable 90° / -90°space requirement approx. 800 mm x 1000 mm x 1300 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Ffjdpfx Agjvwfhvs Rst

Condition: used, used manufactured by Haffner Ffsdjvwf T Ejpfx Ag Rjt type KF20 wall machine workpiece rest lubricant unit total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Without repair work. Pickup in the short term. - free on truck -

Condition: used, cleaned, function checked, test run with face-plate motor used manufactured by Festo type KF stand machine door rest base face-plate motor exhaust connection D 50 mm required space ca. l x w x h mm 1200 x 800 x 2000 weight ca. 200 kg Fedpovwfr Uofx Ag Rsft total connected power 1 kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm Fodpotutwvefx Ag Rsft -max.power 13,2 kW -CE mark

Year of construction: 2022, operating hours: 4,000 h, condition: like new (used), functionality: fully functional, Complete Wood Shavings Line Includes: Loghaver, Vecoplan screen, 3 conveyors, dryer, and furnace Fully operational wood shavings production line in excellent condition. The equipment can be sold as a complete set or individually by parts. Ffsdpfexq Rvuex Ag Rjt For more information, technical details, or photos, please contact us.

Condition: good (used), Year of construction: 1994, - quantity of knives 4 Fjdpfx Asw U Diwjg Reft - lenght of knives 720 mm - diameter of drum 900 mm

Condition: used, Masterwood mortising machine Ffsdox Dnmdspfx Ag Rst

Condition: used, Chain chisel machine, chiseling machine Fedsqv A U Iepfx Ag Rsft

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Working width 1060mm Mechanically adjustable rotation and feeding speed. Fsdpfof Rth Tox Ag Reft Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS

Condition: good (used), Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630 Ffjdpow D E Unsfx Ag Rjt

Condition: excellent (used), Year of construction: 2004, grinding width: 250 mm, working width: 250 mm, grinding height: 100 mm, Double-sided brush sanding machine / profile sanding machine Manufacturer: Quickwood Model: QL 3 Year of manufacture: 2004 Texturing and sanding machine, double-sided operation, equipped with a total of 6 brush units. Machine suitable for integration into production lines due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from above, each 0.75 kW, frequency controlled, suitable for fine sanding Fjdpfx Ajxvz Ulsg Roft Pneumatically controlled pressure rollers for workpiece guidance and stabilization Feed rate steplessly adjustable, approx. 5 - 25 m/min Extraction connections: 150 mm Dimensions approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Condition: new, Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Ffedpfx Aeq Ny Efog Ret Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/Ф140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Condition: ready for operation (used), Year of construction: 2004, I sell the 3-side brushing machine Quickwood CD2-1300, Year 2004. Ffodpfx Agjvylmqj Rjt 2 pcs. Surface brushes from top 2 pcs. Side brushes Working width 1300mm Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy With full Documentation. Available immediately.