Used Wood Products for sale (30,348)

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Application Types Dwedpoxbupasfx Adksc Complete Production

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Dwedpeit Rrvefx Adksc

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln Dwjdpfxowp Rqfo Adksc PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Year of construction: 2013, condition: new, wood baking oven with direct heating baking area 1,0 x 0,7 x 0,25 m (L x W xH) 8cm heatingstones Djdpfxjygm Uo Adkowc also available with fully automatic pelletfiring system

Condition: good (used), Year of construction: 1995, functionality: fully functional, pressure: 160 bar, overall weight: 7,000 kg, Equipment: documentation/manual, Manufacturer: APV Gaulin Dwedpevwbansfx Adkjc Type: 5812MC 120-2.5 TPS Serial No.: 95L34612 Year of manufacture: 1995 Capacity: 22,000 l/h Process/Product: Homogenizing / Milk Number of pistons: 5 pistons Piston diameter: 76.2 mm / 3 inch Max. operating pressure: 160 bar / 2320 Psi Valve type: GAULIN MicroGap Number of stages: 2 stages Valve diameter: 60 mm / 5 gaps Valve design: HVA backpressure valve Including spare parts package New replacement motor available at extra cost Condition: good, fully functional

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,700 kg, The LR700 is a single-shaft shredder designed for a wide range of applications. Customers are impressed by its compact design and universal application options. Together with the proven UNTHA cutting system, the powerful and wear-free swivel pusher ensures reliable shredding of different types and quantities of wood. Further technical data: Motor voltage400 V (50Hz) Suction nozzle200 mm without screw conveyor Belt drive with 2-stage slip-on gearbox and elastomer damper Filling opening 700 x 1,065 mm Hydraulics 1.1 kW Rotor speed: 98 rpm Perforated screen: 25 mm Cutting system rotor Design: Smooth Number of blade rows: 1 pc. Number of cutting tools: 19 pcs. Design of cutting tools: ÜSS Rotor length: 700 mm Rotor diameter: 300 mm Dwjdpfx Adeu Iva Ijkec

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 5 Additional Equipment Djdpoxfctbjfx Adkjwc Central Lubrication Vacuum Supply: 1 vacuum pump (Busch-Mink) Output approx. 250 m3/h 1 unit for manual operation (emergency stop, feed, hood open/close) Protective Fencing Remote Diagnosis Available This 5-axis MKM UNI Portal 50/15 RO was manufactured in 2008, designed for versatile machining of wood, plastics, and light metals. It features a large working area with dimensions of 5000mm x 1500mm, and a clearance height of 200mm. The machine includes a high-performance electric spindle with HSK 63 F connection and a 12-position automatic tool change magazine. Ideal for complex, multi-axis operations. If you are looking to get high-quality milling capabilities consider the MKM UNI Portal 50/15 RO machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), For sale: Genini brand lathe in very good condition Dedpfx Adjxf Nyuokjwc

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers Dsdpsxlb E Asfx Adkjwc - spray booths - correspondence desks - External suction cyclone - various

Condition: excellent (used), Year of construction: 2003, CNC UNICA Wood production year 2003, Uniteam brand since 2016 belongs to Biesse Machine in good working condition, very fast working in x - y - z axis , ideal for milling in wood , MDF, laminated panels Max. useful working area (X-Y-Z) mm 3440 x 1300 x 200 mm Vertical electrospindle motor power 9 kW Machine size 5000 x 2350 x 2200 mm Dwodpowk Ekcsfx Adkec Weight 4000 kg

Condition: used, Year of construction: 2005, functionality: fully functional, 600 mm wide rotor 18 teeth 15 kW motor power Hydraulic pressor Dwjdsxcwb Ispfx Adkec

Condition: as good as new (ex-display), functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 850 kg, extraction nozzle diameter: 160 mm, rotational speed (max.): 85 rpm, rotor diameter: 248 mm, Further Technical Data Feed opening: 516 mm x 830 mm Dsdpfx Aow A Acaedkowc Perforated screen diameter: 15 mm - 20 mm Number of reversible cutting plates: 14 pcs Throughput capacity: approx. 0.5 – 1 (depending on material properties and screen diameter) Required extraction air speed: 22 m/s Sound pressure level: 82 dB (A) Standard Equipment Including feed hopper Motor configuration IE2 Drive via belt drive with 2-stage flange-mounted gearbox and elastomer damper Screen perforation from 12-30 mm Including extraction nozzle Cutting system ÜSS Vibration-damping machine feet Siemens logic module LOGO, including automatic reversing and foreign material shut-off Automatic shutdown when the machine is idle Control elements and hour meter integrated in control cabinet door Voltage 400 V/50 Hz 1 potential-free contact for downstream system components Motor cable 4 m in length Machine equipped with 15-20 mm perforated screen

Year of construction: 2002, operating hours: 29,307 h, condition: ready for operation (used), General Data Measurements width 4500 mm Measurements depth 6650 mm Measurements height 2370 mm Additional Equipment Vacuum Pump: 2 Siemens ELMO-L Program: WoodWop 4.5 Operating System: Windows XP This Weeke OPTIMAT BHC 550 was manufactured in 2002. It features a robust support table measuring 3250x1300mm, suitable for all-around machining, and a workpiece thickness capacity of 100mm. The machine includes a front tool changer with 8 positions and a rear tool changer with 18 positions, enhancing its versatility. Consider the opportunity to buy this Weeke OPTIMAT BHC 550 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types Dwjdpexcql Hefx Adkec CNC Wood Machining

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW right head motor 7.5 kW left head motor 11 kW feed motor 7.5 kW Dedpfx Aeiqflbodkowc electric height adjustment smooth change of feed speed

Condition: excellent (used), CATALOG NUMBER 7102 TECHNICAL DATA - Inlet width: 400 mm - Inlet height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 18x18 mm - Bottom toothed feed roller Djdonwmr Uopfx Adkswc - Lower roller motor: 0.75 kW - Top toothed feed roller - Upper roller motor: 0.75 kW - Belt feeder - Feeder belt length: 3260 mm - Feeder belt width: 400 mm - Main motor: 38 kW - Automatic reverse - Extraction connection diameter: 250 mm - Overall dimensions (L/W/H): 5200x1400x1870 mm - Weight: 2020 kg – German production – Automatic reverse (adjustable) – Used chipper, in very good condition Net price: 63,900 PLN Net price: 15,000 EUR (depending on an exchange rate of 4.25 EUR) (Prices may vary in the event of significant rate fluctuations)

Condition: new, Year of construction: 2025, functionality: fully functional, Filling system consisting of the following components: 1. Cross Trough: Trough width: 2.8 m Trough height (lower side): only 0.8 m Trough depth: 1.2 m incl. protective grid on top incl. 3 kW gear motor left and right versions available Optional: chassis, forklift adaptation, .... 2. Inclined Screw Conveyor: Length: 2 m (other lengths available upon request) Variable inclination incl. 3 kW gear motor 3. Feed Screw: Length: 2 m (other lengths available) Open on the end face All screw conveyors have a diameter of 200 mm and are continuously welded onto a steel tube! (Larger screw diameters also available upon request!) Without wiring and control system Dwjdpfx Aevrcfuedksc We are also happy to offer you custom-made designs! Prices excl. VAT.

Year of construction: 2001, condition: ready for operation (used), Main Drive Spindle speed range 24000 Number of axis 4 Movement X-Axis Movement 6700mm Dwsdpfexczq Tjx Adkjc Y-Axis Movement 650mm Z-Axis Movement 400mm Additional Equipment SHX software Pneumatic vices This 4-axis CIMAN Mizak 6.7 twin was manufactured in 2001. It features a tool magazine with 8 places, pneumatic vices, and SHX software. With a large X-axis travel of 6700mm, Y-axis at 650mm, and Z-axis at 400mm, it's ideal for complex woodworking tasks. B-axis rotation is ±100º, and it operates at 24,000rpm. Consider the opportunity to buy this CIMAN Mizak 6.7 twin wood mill. Contact us for more information. Application Types Milling (Wood)

Condition: excellent (used), Catalog number 7291 TECHNICAL DATA - inlet width 500mm - inlet height 200mm - shaft width 630mm - knife length 630mm Dsdpfx Ajrx T E Tjdkjwc - number of knives 2pcs - sieve dimensions 60x60mm - toothed pulling shaft from the bottom - lower shaft motor 4kW - toothed pulling shaft from the top - upper shaft motor 4kW - feed belt length 4100mm - feed belt width 400mm - feeder motor approx. 2kW - main motor 55kW - auto reverse - feeder dimensions L/W/H 4670x760x720mm - machine dimensions L/W/H 2550x1800x1300mm - weight approx. 4000kg – German production - auto reverse – used chipper, very good condition Original photos Net price: PLN 118,900 Net price: EUR 27,980 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7594 Technical data: - Feed hopper inlet: 620x800mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 620mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 30 pcs - Knife dimensions: 30x30mm - Screen: 12mm/15mm - Pressure drawer - Auto-reverse - Dimensions (L/W/H): 1750x1220x1650mm - Weight: 1020kg ADVANTAGES – German-made – Original DTR documentation – Auto-reverse – Pressure drawer – Very good condition – Used chipper Dsdpfev R Tndex Adkjwc Net price: 39,900 PLN Net price: 9,388 EUR based on rate 4.25 EUR (Prices may change with increased fluctuations)

Condition: excellent (used), Catalog number 7260 TECHNICAL DATA - loading hopper inlet 870x730mm - rotor working width 710mm - main engine 18.5kW - pump engine 0.75kW - number of knives 19pcs - knife dimensions 75x40mm - sieve 15mm - pressure drawer Dedpfx Adsrit Ruokswc - electric auto reverse - outlet for shredded wood fi 250mm - dimensions l/w/h 2350x1400x1670mm - weight 1360kg ADVANTAGES - pressure drawer - very good condition - used chipper Net price: PLN 37900 Net price: EUR 8920 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL SPECIFICATIONS - Loading hopper inlet 800x1000 mm - Rotor working width 800 mm Dwedpfx Adognzd Eokjc - Pump motor 0.75 kW - Main motor 15 kW - Number of knives 21 pcs - Knife dimensions 30x30 mm - Screen 0.8x10 mm - Press drawer - Electric auto-reverse - Discharge augers 2×1.1 kW - Dimensions (L/W/H) 2460x1800x2250 mm - Weight 1660 kg – German made – Auto-reverse – Press drawer – Unpainted – Very good condition – Used shredder Net price: 63,900 PLN Net price: 15,000 euros, depending on the exchange rate, 4.25 euros (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7262 TECHNICAL DATA - Upper loading hopper inlet: 780x620mm - Lower loading hopper inlet: 650x620mm - Output for shredded wood: Ø160mm - Rotor working width: 600mm - Rotor diameter: 248mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 30 pcs - Knife dimensions: 30x30mm - Screen: 20x20mm - Hydraulic pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight: 1200kg ADVANTAGES Dodorm Ii Dopfx Adkswc – Made in Germany – Original DTR documentation – Not repainted – Auto-reverse – Hydraulic pressing drawer – Very good condition – Used chipper Original photos Net price: 38,900 PLN Net price: 9,150 EUR depending on the 4.25 EUR exchange rate (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Infeed width: 540 mm - Infeed height: 300 mm Dodpfxswu Rcre Adkewc - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 40x40 mm - Lower toothed feed roller - Lower roller motor: 4 kW - Upper toothed feed roller - Upper roller motor: 4 kW - Belt feeder - Feed belt length: 4720 mm - Feed belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German manufacture – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,447 EUR depending on the exchange rate 4.25 EUR (Prices may change with major exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - loading hopper dimensions length/width 900x630mm - rotor working width 540mm - engine 7.5kW - sieve diameter 20mm - knife dimensions 40x40mm - number of knives 15pcs - auto reverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008kg ADVANTAGES - German production - unpainted - very good condition - used chipper Net price: PLN 37900 Dwodpfx Aeiwtd Redkoc Net price: EUR 8920 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), Catalog number 7712 TECHNICAL DATA - Inlet dimensions: 4800x150 mm - Shaft width: 560 mm - Shaft diameter: 350 mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse - Sieve diameter: 12 mm - Upper conveyor belt Dodpfx Adew H Ad Sekjwc - Lower conveyor belt - Feed conveyor length: 1300 mm - Infeed table length before conveyor: 1000 mm - Main motor: 22 kW - Feed motor: 0.75 kW, 1.5 kW - Dimensions (L/W/H): 3670/1200/1400 mm - Weight: 1900 kg ADVANTAGES – German-made – Autoreverse – Conveyor belts above and below – Very good condition – Used shredder Net price: 55,900 PLN Net price: 13,150 EUR depending on 4.25 exchange rate (Prices may change with greater fluctuations)