Used Wood Scanner for sale (6,588)

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Bodpjzgc T Djfx Amnoli Please refer to the attached expert report for details on the condition of the item.

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip heating plant with 50 kW heating output, already dismantled. Bodpfx Amev Ngq Aonsli Complete with boiler and chip storage unit, but without chip discharge system.

Condition: used, Drum screen for wood chips Wood chip screen Bljdpfx Asy Dp Eqemnoi With electric motor Length: 4 m Diameter: 1,200 mm

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Blsdpfxsyti Ipe Amnsi

Condition: new, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings Bedpfx Amjzhk Rmonoli - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: used, Capacity for sawn timber: approx. 1 m³, max. sawn timber length: 5000 mm. Tank capacity: 1925 l External dimensions: 620 x 100 cm Bljdpfxszda D Ao Amnei Heated with hot water.

Condition: used, functionality: fully functional, total length: 262 mm, total height: 158 mm, total width: 158 mm, overall weight: 1 kg, Artec Eva professional 3D scanner, tested and fully functional. Handheld scanner with white structured light technology (LED), ideal for scanning medium and large objects with high-quality color capture. Blodpsy U H Rxofx Amnei KEY FEATURES: - 3D resolution: up to 0.2 mm - Accuracy: up to 0.1 mm - Capture speed: 16 FPS (up to 2 million points per second) - Technology: white structured light (safe for scanning people) - Color scanning with 1.3 MP texture - Working distance: 0.4 - 1.0 m - Weight: 0.85 kg (portable, handheld) - Power: 12V DC 2A - Manufactured in Luxembourg - Includes original carrying case and cabling APPLICATIONS: medical sector (body scanning, orthopedics, prosthetics), automotive (reverse engineering of medium-sized parts, dimensional control), heritage and museums (sculptures, archaeological artifacts), sports and technical apparel (human body scanning, custom helmets), forensics and criminology, VFX, and video games. The Artec Eva is the world’s best-selling portable 3D scanner thanks to its combination of accuracy, ease of use, and versatility. Unit sourced from a professional service bureau. Available for demonstration before purchase. Location: Spain. Easy shipping throughout Europe. Please inquire about the type of Artec Studio software license and included accessories.

Condition: used, Year of construction: 2000, Panasonic KV-S4065CW – A3/A4 Document High Speed Scanner Scanning Speed: Up To 80 PPM (Pages Per Minute) / 160 IPM (Images Per Minute) (At 200/300 dpi). S/No. A2788MC1164 Blodpszh Nb Rjfx Amnoi

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker waste material shredder, wood shredder, chipper, shredder MHR630 proline The MHR proline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and industrial operations seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows for increased throughput Blodpfx Amozfawkenoi - Robust construction - Larger feed opening - Excellent value for money - Ready to connect - Siemens PLC controlled - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Bsdoh Hnp Dspfx Amnjli Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Bedpfxoh Eiw Is Amnsli Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Bledpfxjpdqzxo Amnsi Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg Bodpfxsutmw Ho Amnjli - available by arrangement -

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fully equipped Biesse Brema EKO 2.2, including a return system and auxiliary units. Bsdpfozhbpajx Amnjli Quick delivery.

Condition: excellent (used), Year of construction: 2023, Single-rotor shredder with a push floor Rotor width: 1400 mm Bledpezgd Rdofx Amnsi Motor: 55 kW

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open Bljdpfju Szfusx Amnoi *

Condition: excellent (used), For sale: Genini brand lathe in very good condition Blodpfx Amexf Nyusnsi

Condition: used, - 100 x 72 x 12 mm, Bedpfx Amslkcgusnjli - Available: 5, Price per unit: €25.00 + VAT.

Condition: used, - 60 x 72 x 12 mm, Blodpfxslkcgxs Amnoi - Available: 2, Price per piece: €20.00 + VAT.

Condition: excellent (used), Year of construction: 1996, Wood chip screening system Bledpfx Aoxn T R Aomnei Manufacturer - Andritz Group, Model: Konewood CS600 Screen capacity: 400-675m3/h Sieving sawdust and shavings from wood chips Conveyors. Steel Structures: – Steel support structures for screens and conveyors – Ladders and walkways for operation and maintenance

Condition: used, Included in the scope of delivery: 01x single-use pallet, used Material: wood Dimensions: 1,900 x 1,000 x 136 mm Forklift access: 4-way Design: 6 deck boards (75 mm wide) Board thickness: approx. 20 mm Base: 3 skids Bedpfx Asyk Dmhjmnsli Weight per piece: approx. 18.24 kg The stated price refers to the pick-up price (per unit), incl. VAT. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pick-up only. If transport or shipping beyond pick-up is required, additional costs will apply, which depend on delivery location and scope, and can be inquired about separately.

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Bljdpfxjxxrhne Amnji Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Blodpevu Rq Dofx Amnei This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: Bodsdvgxiepfx Amnjli 02x Shelf uprights, used Material color: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Shelf crossbeams, used Material color: orange Beam profile: 120 x 50 mm Clear span: 2,700 mm 08x Locking pins, used Design: fully galvanized 03x Wire mesh grating, new Material color: Sendzimir galvanized Design: laid-on shelf grating, beveled on both sides Depth: (direction of supporting bar) approx. 1,125 mm for upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Crossbeam support: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire thickness: approx. 4.5 mm Maximum load capacity: up to 800 kg with evenly distributed load 03x Trapezoidal sheet metal, 2nd choice Exterior color: RAL 8012 reddish brown Interior color: similar grey-white Sheet length: 1,500 mm Sheet width: 1,075 mm Cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material color: RAL 8012 reddish brown Size: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm with 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws, 4.8 x 20 mm galvanized, self-tapping for wooden substructure Technical data for the firewood storage: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images are example images to illustrate the construction. The material color of the shown uprights and crossbeams may differ. General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Heavy-duty wood lathe with hand copy attachment, sold by private owner with extensive accessories, fully equipped, some items in original packaging. Used, excellent condition, low operating hours. Make: Flott-Arnz. Centre distance approx. 1200 mm, centre height approx. 250 mm. Hand copying device with approx. 1000 mm copy length. Four-prong drive centre, live centre included. 5 spindle speeds: 500 - 2500 rpm. Location: 97447 Gerolzhofen, loaded on truck, unpacked. Sale as inspected, in current condition, without any warranty or guarantee. Bljdeyb S Hkspfx Amnoi