Used Wood Shredder for sale (17,231)

Condition: excellent (used), Catalog number 7268 TECHNICAL DATA - top loading hopper dimensions L/W 1000x600mm - bottom loading hopper dimensions L/W 650x600mm - rotor width 570mm - 15kW engine - 16x12mm sieve - knife dimensions 40x70mm - number of knives 18pcs - auto reverse - pressure drawer - 0.75kW pump engine - dimensions L/W/H 1900x1450x1450mm - weight 1040kg ADVANTAGES – German production – unpainted – very good condition – used chipper Original photos Movie of the machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35900 PLN Gbjdorm Nibopfx Aabou Net price: 8440 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: good (used), Year of construction: 1978, Selling out sawmill factory! Chipper with opening 650 x 160 mm. With infeed rollers Motor 75 kw Gedsphpq Tepfx Aabebu In set 2 screens: 40 x 40 mm - chips 10 x 10 mm - saw dust New knives in set. Very good condition, checked.

Condition: excellent (used), Year of construction: 1998, operating hours: 3,075 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 2,150 kg, Very well-maintained machine in top condition with low operating hours Electronic soft start, idle shutdown Mawera RZM 200 Motor power: 18.5 kW Gbsdpfjwv Enfjx Aabsu Rotor width: approx. 800 mm Rotor speed: 135 rpm Hydraulic pusher with PLC control Chipping capacity approx.: 500-850 kg/h Screen: 20 mm Extraction outlet left or right: 210 mm Original paint Weight: 2,050 kg The machine is installed under a joinery line and has only processed clean wood Last maintenance: 12/2024 Loading possible Comparable to Weima, Untha, Reinbold, Zeno,

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Max. feed opening: 400 x 80 mm Slow speed: 250 rpm Gjdpfjxlm Ntex Aabsbu Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally

Condition: refurbished (used), Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: K62197, power: 18.5 kW (25.15 HP), overall weight: 1,700 kg, Schuko - ZM100 K shredder, overhauled, for sale due to circumstances. Includes discharge auger, rotor and knives are new. The rotor was defective and was replaced by Schuko. We couldn’t wait for the repair and purchased a new machine. The unit runs perfectly. 18 kW. Screen size 12/15 mm. Hopper size 1000*1000 mm. Shredder dimensions: 1050*1500*1710 mm. Sale without warranty. Shipping available. Gbodpfjxlcdmjx Aabeu

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), ♻ The MONSTER is a hybrid machine with two shaft PRE-SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets. ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder combined with pre-shredder, capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder with pre-shredder: ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* Gbedpfx Aaetpwrmsbeu ✔ Material: Pallets ✔ Filling opening: 2072 x 1070 mm ✔ Weight: 4200 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: excellent (used), CATALOGUE NUMBER 7191 TECHNICAL DATA - loading hopper inlet: 870 x 735 mm - rotor working width: 720 mm - main motor: 18.5 kW - pump motor approx. 0.75 kW Gbedeudv Nfopfx Aabou - number of knives: 17 pcs - knife dimensions: 80 x 40 mm - screen: 20 mm - pressure drawer - electric auto-reverse - outlet for shredded wood: Ø 250 mm - dimensions (L/W/H): 2000 x 1350 x 1370 mm - weight: 1586 kg ADVANTAGES – pressure drawer – very good condition – used shredder Net price: 38,900 PLN Net price: 9,160 EUR at a rate of 4.25 EUR (Prices may change with greater fluctuations)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,480 h, functionality: fully functional, Shredder – REINBOLD RMZ 500 year of manufacture 2008 machine compliant with CE standards operating hours: 1480 2 motors of 11 kW (15 hp) each maximum throughput 850 kg/hour top feed opening 1220×1020 mm bottom discharge opening 562×462 mm knife diameter 235 mm user manual + CE certificate + electrical diagram Gbodpoxg Hrwefx Aabju operation tested before disassembly (video available upon request via Whatsapp) transport dimensions 1500x1300x2100h mm weight 1500 kg

Condition: excellent (used), Year of construction: 2017, Waste Wood Shredder Manufacturer: Weima Model: WL 4 Year of manufacture: 2017 Operating hours: approx. 2,684 h Hopper opening: 800 x 600 mm Hopper volume: 0.6 m³ Power: 18.5 kW Screen diameter: 20 mm Number of knives: 14 Feed: Hydraulic Rotor diameter: 252 mm Gbsdpfx Aoxix A Tsabeu Speed: 90 rpm Weight: 1,300 kg

Condition: excellent (used), Year of construction: 2005, Wood chipper with walking floor. Rotor width: 630 mm. Motor: 18.5 kW. Only 612 operating hours. Gedsxl R Awepfx Aabebu

Condition: reconditioned (used), Year of construction: 2010, Hopper opening (base size) 630 x 800 mm Main motor 18.5 kW Standard screen perforation Hopper volume (base hopper approx. 0.6 m³) good condition: Workshop overhaul including new knives, new slide bearings and replacement of electrical components Rotor diameter approx. 260 mm Number of cutting knives 30 Extraction nozzle 160 mm Max. weight 1300 kg Godpfx Aaoxaua Aobsbu PLC control Machine is ready for dispatch

Condition: used, Först XR8 wood chipper, 2018. Kubota engine, 50 HP, 900 operating hours. Fully operational. New tracks. Machine has been serviced. Equipment includes: lighting mast, winch. Professional machine for use in tough conditions. Hydraulically adjustable track width and height. More photos and work videos available for interested buyers. Price negotiable. Open to offers. There is no more powerful chipper in this class. Timberwolf, Jensen, Thunissen, Bandit, Morbark. Gsdpfx Aajxdtcdsbjbu

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Inlet of loading hopper: 1200x1000 mm - Outlet for shredded wood: Ø160 mm - Working width of rotor: 980 mm - Main motor: 18.5 kW - Number of knives: 24 pcs Gbodewrpv Eepfx Aabeu - Knife dimensions: 30x30 mm - Screen: 20 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850 mm - Weight: approx. 2,500 kg ADVANTAGES – German manufacture – Auto-reverse – Pressure drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,210 EUR at 4.25 EUR exchange rate (Prices may change with larger fluctuations)

Condition: good (used), functionality: fully functional, power: 18.5 kW (25.15 HP), Weima ECO 600 E shredder, year of manufacture 10/2005 Gsdpfx Aaexf T Hrjbjbu Electric motor: 18.5 kW Drive power via V-belt and gearbox Infeed opening: 600 mm x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Tools: 14 knives Extraction port diameter: 160 mm Weight: approx. 1,300 kg

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: Gbodpod Hkqhjfx Aabju - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: good (used), Year of construction: 1987, functionality: fully functional, Slow-speed machine with walking floor Rotor width: 420 mm Motor: 7.5 kW With hydraulic slider Gbedpsxf Ibwsfx Aabju

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Shredding machine with material pusher and rotor. Machine for the production of fuel chips from wood waste and chipboard. Rotor with interchangeable knives (30 pieces) Knives were recently replaced Motor 22 kW Feed opening approx. 840 x 1000 mm Solid steel rotor, approx. 270 mm diameter Rotor speed approx. 135 rpm Shredding capacity approx. 500-850 kg/h Extraction outlet approx. 210 mm / extraction capacity 30-35 m/sec Gedexat Swepfx Aabsbu Control cabinet External dimensions: L x W x H approx. 2000 x 1500 mm Weight approx. 2100 kg The data has been taken from a brochure, therefore without guarantee.

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Gjdpfx Aexfiurjabjbu Power: 75 kW Cassel metal detector Approx. 40 linear meters of vibratory troughs

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA inlet width 900mm inlet height 300mm shaft width 1030mm shaft diameter 700mm knife length 1030mm number of knives 3pcs sieve dimensions 70x70mm from the bottom 2 toothed pulling shafts lower shaft motor 7.5kW from the top 2 toothed pulling shafts upper shaft motor 7.5kW belt feeder redler with chain belt 5600mm + 10600mm 2.2kW feeder belt width 800mm main motor 90kW reverse gear total dimensions of the machine L/W/H 3300x3100x1700mm dimension of base for chipper 3300x2080x1940mm dimension of feeder/redler length/width/height 5600x900x1000mm + 10600x1050x1600mm dimension of base for feeder belt 5100x1300x2520mm total weight approx. 16000kg ADVANTAGES – German production – chain conveyor type redler, equipped with scrapers – reverse gear – DTR documentation – used chipper, very good condition Net price: PLN 269900 Net price: EUR 63490 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) Gbodpfjwi Sm Uox Aabju

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces Gsdeh Eiw Iepfx Aabjbu type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: excellent (used), Catalogue number 7293 Gbedpfx Asr Hmxdeabeu TECHNICAL DATA - Loading hopper dimensions at the top (L/W): 1200x1520 mm - Loading hopper dimensions at the bottom (L/W): 1000x1520 mm - Outlet for shredded wood + screw conveyor - Working width of rotor: 1500 mm - Main motor: 45 kW - Pump motor: approx. 1.5 kW - Number of knives: 41 pcs - Knife size: 40x40 mm - Screen: 15 mm x 20 mm - Pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 2450x2460x1720 mm - Weight: approx. 3000 kg ADVANTAGES – German-made – very good condition – used wood chipper Original photos Net price: 155,900 PLN Net price: 36,682 EUR at an exchange rate of 4.25 EUR (Prices may vary in case of significant fluctuations)

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into Godpfsh Hnp Dex Aabsbu and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - Inlet width: 440mm - Inlet height: 300mm - Shaft width: 480mm - Shaft diameter: 440mm - Number of knives: 2 pcs - Screen size: 50x50mm - Toothed feed shaft from above and below - Shaft motor: 0.78/1.1kW - Electric autoreverse (adjustable) - With conveyor belt - Infeed belt length: 4006mm - Infeed belt width: 380mm - Belt feed forwards/backwards - Main motor: 30kW Godpjwu Rgdofx Aabjbu - Dimensions (L/W/H): 6100x1100x1100mm - Weight approx. 2000kg ADVANTAGES – German-made – With belt feeder – Autoreverse – Used chipper, in very good condition Net price: 76,900 PLN Net price: 18,090 EUR based on 4.25 EUR rate (Prices may change with larger fluctuations)

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Gbsdsutmw Hepfx Aabsu Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Gedopdqzxepfx Aabsbu Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -