Used Wood Turning Lathe for sale (24,571)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Dcsdpfx Agewz Rifo Rob Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min Dcsdpfxomu Rtuo Ag Rsb total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: used, Year of construction: 1990, Technical details: spindle passage: 23 mm z-axis: 150 mm turning length: 150 mm stroke: x+z Achse / Axis/eje/eixo/os = 30 mm facing movement (x-axis): 30 mm longitudinal traverse (z-axis): 30 mm control: Num 760T Dcedpfx Ageu Iwyvj Rob spindle turning speed - continuous: U/min feed speed: x/y: 5 mm/min feed speed: z: 10 mm/min tool turret: 2 Stück/pcs mit je/each 6 tools operating pressure: max. 45 bar total power requirement: 8,0 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,45x1,3x2,2 m dimensions of the bar loader L-W-H: 4,65x0,5x1,3 m techn. details: - bar clamping hydraulic -automatic workpiece discharge (via catch basket) - 2 turrets with each 6 tool tapers - coolant device - control NUM 760 (size: L:1,0xW0,8mxH:1,56m) Zubehör: - bar loader magazine make IEMCA type CS 112/31 accessories: -24 div. tool tapers - device tool Sylvac system ( size:L:0,58xW:0,5xH:0,43m) *

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest Dcsdsqwlmqjpfx Ag Rjb type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: excellent (used), Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Dsdexhbyxjpfx Ag Rscb Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CLASSROOM MACHINE For sale is a Drechselmeister Twister FU 200 wood lathe with a distance between centers of 715 mm. The machine is in very good condition. Technical Specifications - Center height: 200 mm - Swing over bed: 395 mm (700 mm with optional outboard turning attachment) - Distance between centers: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drilling quill - Motor: 2 HP (connection 230 V) - 2-stage emergency stop switch - Weight, stand version: 166 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Dcodpfx Aswudkieg Reb Shipping by freight: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: wood lathe, lathe, turning machine, woodworking lathe, woodturning, turning tools, woodturning, machine Reference: R-A0117

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm Dedpfslzm Eqox Ag Recb - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m Dcodjvivx Nepfx Ag Reb CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: used, HANWHA XP12 SWISS TYPE TURNING LATHE MAKE HANWHA-HANEX, MADE IN KOREA MODEL XP 12 YEAR 1996 CONTROL FANUC OT-C MAX MACHINING LENGTH 140.0 mm Dcodpfx Agswidymj Reb MAX HOLE DIA 6.0 mm SPINDLE HOLE DIA 14.0 mm SPINDLE RANGE 100 – 10,000 RPM SPINDLE MOTOR 1.5/2.2 kW TOOL NUMBERS 5+3 TOOLS RAPID FEEDRATE X AXIS: 15m/min Y AXIS: 15m/min Z AXIS: 15m/min MACHINE DIMS 1150 x 830 x 1540 mm MACHINE WEIGHT 900 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED TOOL HOLDERS COLLETS SET OF MANUALS COMPLETE

Condition: used, Year of construction: 2008, turning length: 300 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, turning diameter: 32 mm, Machine in production. Equipped with: - Knoll high pressure pumps up to 60 bars - Collant cooling device - swarf coveyour Dcsdpfjxwmidex Ag Rjb - FMB bar feeder - live tools - 2x C axis We can load machine on your truck free of charge.

Condition: good (used), Star SR-20 Type 530G CNC Sliding Head Lathe with Fanuc Series 16-T Control & FMB 'Turbo 3-26/4200' Automatic Bar Feeder Dcjdpfxox Ah R Hj Ag Rjb 7-Axis. Ø20mm Lathe Spindle Turning Capacity. Spindle Speeds Up To 8,000rpm. (3) Driven Heads. S/No. 010944. FMB 'Turbo 3-26/4200' Automatic Bar Feeder. Bar Capacity Ø3mm-26mm x 4,200mm Long. With: Coolant Tank. Parts Catcher. Cromar Chip & Swarf Conveyor. Mobile Tipping Swarf Bin. Assorted Collets. Power Supply 415 Volt 3-Phase. Weight of Lathe Approx 1,800kg.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, NOW: Clearance sale of lathes (demonstration models, showroom units, and workshop machines). We are selling various lathes with low operating hours that were used during our demo days or in one of our woodturning course rooms. You will receive a full warranty. All lathes come equipped with a drive center, live center, and faceplate (or other basic equipment and operating instructions). Detailed information and technical data for each machine type can be found on our website! Shipping available upon request! Available machines: Djdpfx Agjwyn Dko Recb * Drechselmeister Miditec FU 175 SET € 999 incl. VAT (€ 832.50 excl. VAT) * Drechselmeister MIDI 1 bench lathe € 880 incl. VAT (€ 733.33 excl. VAT) * Drechselmeister MIDI 2 PLUS bench lathe € 1,099 incl. VAT (€ 915.83 excl. VAT) * Drechselmeister TWISTER FU-200 lathe € 2,293 incl. VAT (€ 1,910.83 excl. VAT) * Drechselmeister STRATOS FU-230 lathe € 2,633 incl. VAT (€ 2,194.17 excl. VAT) * Drechselmeister STRATOS FU-230 LV lathe € 2,845 incl. VAT (€ 2,370.83 excl. VAT) * Drechselmeister TWISTER XL lathe € 3,398 incl. VAT (€ 2,831.67 excl. VAT) * Drechselmeister STRATOS XL lathe € 4,248 incl. VAT (€ 3,540 excl. VAT) * Teknatool NOVA NEBULA 230 DVR lathe € 2,590 incl. VAT (€ 2,158.33 excl. VAT) * Teknatool NOVA Galaxy DVR lathe € 1,990 incl. VAT (€ 1,658.33 excl. VAT) * RECORD POWER lathe DML 250 € 280 incl. VAT (€ 233.33 excl. VAT) * RECORD POWER lathe CORONET ENVOY € 1,799 incl. VAT (€ 1,499.17 excl. VAT) * RECORD POWER lathe Coronet Herald SET € 1,079 incl. VAT (€ 899.17 excl. VAT) * HAGER lathe STAR 200 MAX SET € 2,890 incl. VAT (€ 2,408.33 excl. VAT) * HAGER lathe HDG 250L € 3,990 incl. VAT (€ 3,325 excl. VAT) * HAGER lathe HDE300 € 4,680 incl. VAT (€ 3,900 excl. VAT) The machines are located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Related terms: lathe, turning machine, bench lathe, woodturning lathe, woodturning, turning tools, wood turning, machine Reference: R-A0117

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW Dcedpjw Uf Hwefx Ag Reb - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, Year of construction: 2001, Technical details: bar material dia.: 20 mm turning length: 205 mm turning speeds: 10.000 / 8.000 U/min number of tools: 19 driven tools: ja / yes control: FANUC 18i-T Dodpfevivyajx Ag Recb CNC sliding headstock machine, subspindle,7 axes (X/Z/Y/C1/X1/Z1(C2), Rod Ø max. 20 mm, Turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle with collet chuck, max. speed 8,000 rpm, C-axis, Tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt, Standard guide bushing unit Loading magazine FMB turbo 3-26/3200 / A /, year 2001 Coolant used in the machine: oil. Extinguishing system Kraft & Bauer estimated hours: 50.000h "machine on" and 30.000h "spindle on" *

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for maximum smoothness and stability when working with unbalanced workpieces Headstock movable along the entire length of the machine bed, 360° rotatable with locking positions at 0, 30, 60, 90, 135, 180, 270 degrees Variomatic speed control, continuously adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle dividing device 36 x10° Dedpfx Aew A Rqfjg Rocb Spindle locking on the front of the headstock for easy change of workholding devices Double wedge clamping for tool rest and extension arm, offering extra slip resistance and efficiency Tailstock with robust trapezoidal thread, 108mm quill stroke with scale, 9 mm through-hole

Condition: used, Make: Schiess Control: Conventional Location: Germany Dedpfx Asxpd Emog Rscb Major overhauls: 2009 new electric with new AC main motor, 2022 overhaul of the gearbox. Condition: under power, in good condition Chuck Ø: 9500 mm Swing Ø: 10500 mm Max. Workpiece Weight: 150 T Max. Working Height: 4500 mm Ram Vertical Travel: 2250 mm Chuck Speed: up to 7.35 rpm Machine Weight: aprox. 400 T Left ram is currently dismantled but will be supplied together with the machine.

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 2 NCU 2 Syncrons 2 Y-Axis Control: Siemens Solution Line Knoll System Bar Feed: IEMCA SIR rack loader (12-ft) 22,000 on-hours Dodpfx Agjx H H Nre Rocb 10,000-15,000 Hours

Condition: reconditioned (used), functionality: fully functional, Equipment: rotational speed infinitely variable, A used Benzinger precision hand lathe. Universal application with a Röhm 4-jaw chuck. The machine is partially overhauled and fully functional. Equipped with a Röhm 4-jaw chuck Dcodpowp Ddxjfx Ag Rob 2 hand lever slides with Multifix universal tool holder Kobold motor 0.55 kW, 1400 rpm with stepless speed control. The following work has been carried out: - New spindle axial bearing - New V-belt - Machine bed hand-scraped - New capillary lubrication - Motor overhauled - All dovetail guides ground and hand-scraped - All guides adjusted free of play - New graduated drums and leadscrews - Cross-slide completely overhauled - Cross-slides with Multifix completely overhauled

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette Dcsdpfsrtd Uwox Ag Reb - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 Dsdpfx Ajvivygeg Rscb driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 Dedpfovnwfzsx Ag Rocb control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw Dsdpfx Agem E I D Hs Rjcb turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: used, Year of construction: 2005, functionality: fully functional, power: 45 kW (61.18 HP), input frequency: 50 Hz, The second-hand Twin Aces BRAVE-F1 model was manufactured in 2005 and is in perfect working condition. Its technical specifications are as follows: Djdpfx Asv Hdlfjg Rjcb Serial No: B05046 Installed Power: 45 kW Voltage: 380V AC ±%10 Frequency: 50/60 Hz

Condition: like new (used), Year of construction: 2004, functionality: fully functional, Citizen M32V - Baujahr : 2004 Anbei mal paar Maschinendaten der M32-M332V Dedpfexfr T Rox Ag Rscb - Durchlass für Stangen: 32mm - 10 Werkzeugplätze auf Revolver mit Y-Achse für Stirn- und Rückseitenbearbeitung - ⁠5 Kammwerkzeugplätze - ⁠3 Werkzeugplätze auf Bohrblock f.Rückseitenbearb. - ⁠4 angetriebene Werkzeuge für Quer - C-Achse Hauptspindel - Fräsinterpolation - schneidenradiuskompensation - ⁠synchron gewindebohren - ⁠ER16 Aufnahmen Februar 2022 – Kugelrollspindel X2 Achse getauscht und Lager gewechselt August 2022 – Regler X2 Achse getauscht September 2023 – Messsystem / Regler Ti-Achse getauscht März 2025 – Messsystem Ti-Achse getauscht

Condition: like new (used), Year of construction: 2007, Citizen M32V - Baujahr : 2007 Dodsxfr Tdjpfx Ag Rscb Anbei mal paar Maschinendaten der M32-M332V - Durchlass für Stangen: 32mm - 10 Werkzeugplätze auf Revolver mit Y-Achse für Stirn- und Rückseitenbearbeitung - ⁠5 Kammwerkzeugplätze - ⁠3 Werkzeugplätze auf Bohrblock f.Rückseitenbearb. - ⁠4 angetriebene Werkzeuge für Quer - C-Achse Hauptspindel - Fräsinterpolation - schneidenradiuskompensation - ⁠synchron gewindebohren - ⁠ER16 Aufnahmen Juni 2023 – Motor Gegenspindel getauscht Juli 2023 – Tacho Gegenspindel getauscht November 2023 – Kabel Ti-Achse getauscht November 2023 – Motor Ti-Achse getauscht Juni 2024 – Festplatte getauscht Juli 2024 – komplette NC