Used Woodturning Tools for sale (37,092)

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun Fsdpfjy Hmhuox Af Aopg • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a Fpjdpfx Afjy Idfme Ajg training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M Fpjdpfx Aey Iddpef Ajg table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: new, Year of construction: 2026, 560 mm 320 mm Fpedpfx Ajy H N Spof Aeg 400 mm 950x450 mm 1050x320 mm 25-3600 U/min DIN 69871 SK 40

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm Fpsdoy H N Sijpfx Af Aeg 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: excellent (used), For sale: Professional tool grinder by HASBERG, model FSS. German-made, solid and precise construction. 📊 Technical data: Manufacturer: HASBERG Model: FSS Year of manufacture: approx. 1976 Power supply: 3-phase 220/380 V Motor power: 250 W Speed: 2750 rpm 🛠 Condition: The item is used, shows normal signs of wear, and is in good technical condition. The machine is fully functional and ready for operation. 📦 Included: Set of collets (various diameters – as shown in the photos) Additional grinding wheels Accessories as visible in the photos ✅ Advantages: Very robust construction (German quality) Large set of collets (high value) Precise machining and tool sharpening Ideal for workshops, tool rooms, or production Fpodpfx Afsy A Tqzj Aeg ℹ️ Additional information: The set for sale is exactly as shown in the pictures. Inspection on site possible. Shipment on a pallet or personal collection possible.

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Fodpfxem Uygve Af Aspg

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Fodpfx Afoygctrs Aopg Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1996, functionality: fully functional, total height: 2,120 mm, total length: 1,360 mm, total width: 1,965 mm, spindle speed (min.): 5,200 rpm, feed length X-axis: 400 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 1,850 kg, center height: 210 mm, grinding spindle motor power: 1,500 W, workpiece diameter (max.): 400 mm, input voltage: 380 V, We offer this used Schneeberger NORMA NC4 tool grinding machine, year of manufacture 1996. CNC-controlled X Y Z A axes. ISO50 dividing head. Complete with coolant tank and pump. Fedpoyw Tz Ajfx Af Aopg If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: new, Walter Technic Compressor Model: SKTG 5.5 PP Kombo Fpsdpfjy Nlwtsx Af Ajg Dryer, Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. Fjdpfxoy Hfnmj Af Aspg The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: new, PERFECT Multi-Function Machine JOINTER: - Planing width: 310 mm - Motor power: 3 kW - Max. width: 310 mm - Max. chip removal: 5 mm - Main shaft speed: 5000 rpm - Shaft diameter: 75 mm, 3-knife - Adjustable fence: 0°-45° Fodsy I Efhepfx Af Ajpg - Table dimensions: 1300 mm x 310 mm THICKNESSER: - Planing width: 310 mm - Feed speed: 8 m/min - Max. planing height: 180 mm PANEL SAW WITH SCORING UNIT: - Motor power: 3 kW - Main blade size: 250 mm x 30 mm - Scoring blade size: 88 mm x 30 mm - Max. cutting height: 65 mm - Max. cutting height at 45°: 45 mm - Main spindle speed: 4050 rpm - Scoring unit speed: 6300 rpm - Dust extraction outlet: Ф 100 - Carriage length: 1500 x 310 mm - Max. rip capacity with side fence: 1400 mm - Cutting width on right side of the fence: 520 mm SPINDLE MOULDER: - Motor power: 3 kW - Spindle diameter: Ф 30 - Fence adjustment: 130 mm - Spindle speeds: 3500 / 5500 / 7000 rpm - Max. cutter diameter: Ф 150 - Max. height: 105 - Dust extraction outlet: Ф 100 DRILLING MACHINE: - Max. drill bit diameter: Ф 16 - Vertical adjustment (up/down): 140 - Lateral adjustment (left/right): - Table dimensions: 161 x 368 mm - Main motor for Jointer, Thicknesser, and Drilling Machine: 3 kW

Condition: used, A large selection of SK40 tool holders, including mounted milling cutters, drills, and threading tools from workshop/industrial inventory, is available for sale. Mainly available: * SK40 shrink-fit holders * SK40 collet chucks / ER holders * SK40 tapping chucks * SK40 screw-in holders / Weldon holders * Various special adapters and milling heads Some holders are already equipped with: * Solid carbide end mills * Thread milling cutters * Thread taps * Drills * Face mills Various manufacturers, diameters, and designs available. Condition ranges from very good to used. Fpsdpfxsy Rmfhe Af Aog ❗ Prices vary depending on the holder, tool, manufacturer, and condition. Therefore, please provide specific inquiries including: * Desired holder * Diameter / type * Ideally with a marked image or screenshot 📍 On-site inspection is expressly preferred to avoid any mix-ups and to allow direct inspection of the tools.

Condition: excellent (used), Tool holder steep taper 45 (SK45) to MK2 (for milling arbors, shank milling cutters, for milling machines). Manufacturer: Bahmüller, Type W640/1 – Wilhelm Bahmüller Maschinenbau Präzisionswerkzeuge GmbH Very good condition Fsdpfjymx Edex Af Aspg Without drawbolt (thread M16), with integrated ejector screw for clamped tool. Milling tool holder – tool taper for clamping Price €55,-- net ex location plus packaging costs All technical data subject to errors and omissions. We sell exclusively to countries within the European Community.

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Fsdpfxoyzt Nzj Af Aopg Accessories as shown in the photos. Price is for the entire unit.

Condition: like new (used), Tool Grinder Brand:Schneeberger Fpjdjllwx Eepfx Af Asg Type:11 ARIES Nro13901 Tool sharpener Schneeberger with accessories Stock no:2001616TKG

Condition: excellent (used), For sale: the grinding machine shown in the photos, manufactured by the British company Eliot, model 618. The condition of the machine is rated as very good – almost like new. It has been used very rarely, which is the reason for the sale. Net price, VAT 23% Fodpfoy A Tnmsx Af Aspg AEG motor 1.5 kW Maximum spindle-to-table height: 400 mm Rapid traverse in Z axis Table size: 150x450 mm

Condition: like new (used), PUMA 4100MB CNC Lathe (With Live Tooling) Max. turning diameter: Ø560 mm Max. turning length: 978 mm Bar capacity: Ø116 mm Chuck diameter: 15” (380 mm) Fpsdpey Aikwsfx Af Aog X-axis travel: 352 mm Z-axis travel: 1105 mm Rapid traverse (X/Z): 16 / 20 m/min Spindle speed: 2000 rpm Motor power: 30 – 37 kW Torque: 1600 – 2400 Nm Spindle bore: Ø117 mm Turret: 12 stations Tool type: BMT-75 Live tool speed: 4000 rpm Live tool power: ~23 kW ✔ 4 live tools in active use

Condition: like new (used), Year of construction: 2021, operating hours: 5,999 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,970 kg, space requirement width: 2,435 mm, space requirement length: 1,875 mm, space requirement height: 1,800 mm, workpiece weight (max.): 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multiple ribbed cast construction ensures full performance across the entire working area. Control System SIEMENS 840D SL path control Working Range X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage main gearbox with high torque and automatic gear shifting Drive power 100% / 25% DC: 5.5 / 7.0 kW Torque 100% / 25% DC: 210 / 340 Nm Speed range: 0 - 4500 rpm, infinitely variable gearbox Digital Feed Infinitely variable feed rate on all axes Feed range: 0 - 2000 mm/min, infinitely adjustable Rapid traverse: 5 m/min Handwheel rotation: 2.5 mm per X / Y / Z axis Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill with manual clamping, stroke 80 mm Tool holder: SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – standard Additionally, the milling head can be shifted 150 mm on the Y-axis. For horizontal machining, the milling head does NOT need to be removed—simply slide it back into the rear rest position. Rigid Angle Table Clamping surface: 820 x 420 mm T-slots: 1 piece/14 H7 alignment slot, 5 pieces/14 H12, spacing 63 mm Table load: 350 kg Standard Equipment Fpsdpfx Afsy R Ebzs Asg Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable, for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical & horizontal, with threading cycle without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Compact electrical cabinet integrated with machine Splash guard enclosure with optimal operator access Toughened glass window on rear of enclosure Top open, front and right door plus sliding door on front, secured with interlock switch Locked when unpowered; additional maintenance opening on left side—bolted, removable Freestanding mobile coolant tank, 80 liters (dimensions: 1250x460x200 mm) Automatic central lubrication Steel telescopic cover to protect Z-axis guideways Halogen machine lamp V24 Easy-to-use milling guard with plexiglass pane Operator manual, spare parts plan, and electrical diagram in paper form Set of machine feet Transport rod and stop rings for 2-strand lifting gear Color: Light grey RAL 7035 and tele grey RAL 7045 fine texture Footprint – Electrical Specifications Machine weight approx. 1970 kg Space requirement (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. pre-fuse: 35 A NH Network type: TN-S Connection type: fixed connection For further information, please refer to the PDF attachment. The machine is supplied without tools or accessories.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 42,200 h, pressing force: 130 t, table length: 3,230 mm, clearance between the columns: 2,650 mm, total length: 3,980 mm, total width: 1,900 mm, total height: 2,840 mm, overall weight: 10,200 kg, control type: CNC control, Hello, We are selling Trumpf TruBend 5130 CNC press brake, tooling included.. 130t/3meter CNC bending machine, 4-axis back gauge, CNC crowning, TASC 6000, Willa hydraulic clamping, Fpedpfx Afoy Nd I Rs Ajg Tooling included, priced aprox. 10000€ Lower die 16mm - 3m - sectionized for 30° 50mm - 3m - sectionized 80mm - 515mm Upper Tool finer height 200mm, radius of 1mm, for 30° - 3m - sectionized, for thicker plates height 20mm, radius 3mm - 600mm - sectionized Feel free to contact.

Condition: good (used), Tool holder for SK 40 chucks Fedpfodm Supox Af Aspg -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price: complete

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Fedpfx Asy Ed Sbef Aepg Type: S20 Turbo Year of construction: 2004 Type of control: CNC Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Fpedpfx Afey Rxvlj Ajg

Condition: used, Universal facing and boring head WOHLHAUPTER type UPA 3 Spindle tool, spindle head (suitable for DECKEL) Manuf. No. 40769 Tool holder: MK 4 - S20x2 Tool holder: SK 40 - S20x2 Shaft tool holder: Ø 18 mm Adjustment accuracy: 0.01 mm - with adapter sleeve MK4 to SK40 Fpsdpfx Aey Ehyijf Aeg - Accessories as shown - Storage case Net weight (spindle head only): 2.8 kg Weight with storage case: 6 kg good condition

Condition: good (used), Turning tool with indexable jaws, clamp holder, turning tool, indexable insert holder, turning insert, indexable insert steel, inner diameter drill holder, turning tool holder, boring bar -Turning tool: Boring bar inner diameter drill holder with indexable insert -Type: Length 520 mm -Order No.: 701-12-201119 -Dimensions: 520/40/33 mm -Weight: 4.3 kg Fedpfxet Acyij Af Aspg