Used Kant Tools for sale (36,817)

Year of construction: 2018, condition: like new (used), Zero-point clamping system Manufacturer: Vischer & Bolli VB tools Year of Manufacture: 2018 Condition: unused System consists of: 1 Dock Lock clamping plate made of steel Size: 600x200x85/95 mm with 2 DockLock SAFE20 built-in cylinders up to 12.5 kN per cylinder 10 mounting bores for M16 Allen screws 1 special base plate made of steel Size: 800x250x76 mm Nedpfxogquv Uj Aa Dswb 1 DEUX-MILL clamp 1 special base plate made of aluminum Size: 600x600x40 mm 5 SAFE20 long clamping bolts with centering 10 SAFE20 long clamping bolts without centering 5 SAFE20 long compensation clamping bolts 1 hydraulic pump

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Nwodsx Sqaxjpfx Aa Deb Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Nodjydvzdjpfx Aa Djwb Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Nwodpfxex N Ncge Aa Dob

Condition: used, Manufacturer : Turbo tools ltd Model: NMD888 Type : piston dosing machine Mode : Automatic / semi-automatic (shot by shot) Nsdpfsx R Avcox Aa Dswb Operation: pneumatic Foot pedal action Adjustable dosing pump Feeding hopper Stainless steel 2 sets of filling heads available

Condition: excellent (used), Year of construction: 2021, Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press Nodporza Duefx Aa Dowb

Condition: excellent (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, HAAS-LASER HL 54P Laser welding machine Excellent Condition with all the manuals and accessories. Nwedpfetqynqjx Aa Dsb Laser source Trumpf

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Nwodpfx Aeya H Nkea Dob Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Nedsyaywhopfx Aa Dowb Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Nwodpfox Tiq Sox Aa Dob Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Food Tools CS1000CE Automatic round cake cutter Nwedpfx Aaewmdc As Dob Serial: 3190 This cake slicer is capable of cutting a variety of frozen round products including cheesecakes, layer cakes, ice cream cakes, pies and more. The machine is best for bakeries producing 200 or more products per hour

Condition: good (used), Year of construction: 2015, Food Tools CS4AAC round cake slicer Serial: 5253 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile Nedpfewmdb Ssx Aa Dewb

Condition: excellent (used), 595 x 395 mm Clamping pressure -70 bar Nodpfx Aaoiz A E Ee Dewb MARCELS MASCHINEN AG

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Nwedpewtnxnjfx Aa Deb Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Nsdpfjxftqdjx Aa Dewb Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 787 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, workpiece weight (max.): 600 kg, The machine is in good technical condition, connected to power and can be tested. Nwsdpfx Ajxxtmfea Djb

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Nwjdpfsx D U Arex Aa Djb Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Nodjx D Tbmopfx Aa Dswb Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, functionality: fully functional, Full automatic pet blowing machine- linear Full Servo Drive. 4 cavities to 2000ml Brand new blowing capacity 4000bph Nwedpfx Ajwrrcnea Dsb Low energy consumption

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Nwsdpfxsxxb Rro Aa Dob Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Nodpfxjb Umtke Aa Djwb

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Nsdpsxt Ibysfx Aa Dswb Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Nedpfx Aaexfaqws Djwb Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: Nodpfx Aju Impyja Dswb - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. tool trolley with tool set 272 pieces. Nedju Imp Tspfx Aa Dowb See pictures