Used Woodworking Dust Collection for sale (39,513)

Year of construction: 2015, condition: ready for operation (used), Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Csdpok Ea Uusfx Abzshd

Condition: good (used), Year of construction: 1994, Chalet notching machine with 10-meter Tiger stop pusher, equipped with: 1 horizontal milling unit on top, 1 horizontal milling unit below, 1 front/rear milling unit, 1 horizontal drilling unit diameter 16 mm, 1 automatic Tiger stop of 10 meters, year: 2001, effective working length: 9.20 m. Chsdoxbn N Tspfx Abzod

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Chodpfx Asrb D Njbzsd Air flow rate 1850 m³/h / 400 V

Condition: excellent (used), - Total air flow rate: 70.000 m3 /h - 610 m2 (squared meters of total developed filtering surface/area) Cedpsh Icn Sjfx Abzehd - No. 540 filtering bags (each diameter mm 120 x length mm 3000) - Average speed of the air in the filter: 1,86 m / sec - Electro-Fan type TRMV 1401 diam 1000, power KW 132 (HP 176)

Year of construction: 1993, condition: used, Offer in progress! Csdpswftursfx Abzshd

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air Chjdpfx Asl Dw U Debzod cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: ready for operation (used), Year of construction: 1999, A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible. Cedpfowhfmrox Abzshd

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- Csdeib Dadjpfx Abzjhd 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection is possible. Expected to be available from the end of September 2025. Chodjw Azuzepfx Abzed

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Csdpfx Absnyhvqjzehd Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: ready for operation (used), Year of construction: 2004, Travel Z: 535mm, travel speed X/Y/Z: 60m/60m/30m/min, max. workpiece dimensions X/Y/Z: 4175mm/1730mm/300mm. Main spindle: power: 18.5kW, speed: 24000rpm, max. tool diameter: 200mm, max. tool length: 200mm, max. tool weight: 6kg. Drill diameter: 35mm, speed: 6000rpm, power: 4kW, projection stroke: 50mm, swivel: 100°, cross-cut saw diameter: 180mm, number of spindles: 4, vacuum pump capacity: 100m³/h. Documentation available. On-site inspection is possible. Chjdpfswmqw Hsx Abzsd

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. Chedpfx Abstixlbjzsd The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. Codpfxeuy N S Uo Abzehd 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Condition: used, Year of construction: 2003, suction capacity: 3,600 m³/h, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. 4 Kw fan. Chsdpfx Abjrwm Izszed Capacity - 3600m3/h year of production : 2003

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Codpfemrm Raex Abzjhd Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. Csdpfx Abopgnfdjzjhd 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: excellent (used), Year of construction: 2007, filter area: 28 m², volume flow: 6,000 m³/h, negative pressure: 2,700 Pa, intake manifold diameter: 300 mm, Sawdust extractor, dust extraction, self-cleaning filter, vacuum brand Hoecker Polytechnik Model: EA 300-7A with pneumatic cleaning of filter bags during operation Year of manufacture 2007 Codpfxerp D Naj Abzohd 7.5 Kw fan Capacity 6 000 m3/h Filtration area 28 m2 Vacuum pressure 2700 Pa Air return Capacity of dust tanks - 495 l Equipped with automatic fire protection system Inlet diameter 300 mm Technical documentation included.

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table Codpfx Abon Nw Ntozehd extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Dust collector, extractor, self-cleaning vacuum filter, absorber, dust collector for extraction of graphite dust, metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and effective collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Chedpfjg Rhfbsx Abzsd The dust extractor has explosion class ST1 and ST2 The vacuum fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Pocket filter insert - multi-pocket 11 Kw fan in sound absorbing housing Capacity 3500m3/h Negative pressure 7000 Pa Filtration area 24 m2 Automatic filter cleaning by electric motor. The extractor has been working on graphite processing.

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. The cabin provides personnel with a simple option to to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Cedshm E S Aspfx Abzshd Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Chjdpfx Abotq Ufvozed High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. Chedpfxstpwrqe Abzod The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, Cjdpfxjrhidms Abzshd located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Cedpfxohqd Tvj Abzehd Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Csdpjiu Hq Dsfx Abzohd Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m