Used Woodworking Dust Collection for sale (18,381)

Condition: used, Power connection 480V 4kW Filter area 15.8 m² Vnom 3200 m³/h Vmin 2262 m³/h Extraction connection D=200 mm Dedpfx Aovz U Srjfpoun Weight approx. 550 kg LxWxH: 2400 x 900 x 2100 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 200642, volume flow: 3,200 m³/h, RIEDEX - Deduster Model DM-200/M-B max. volume flow 3200 m³/h Duodpfxotwz Hlo Afpen motor power 4.0 kW without extinguishing device Left-hand version motorized cleaning with chip garbage cans

Condition: used, Year of construction: 2000, functionality: fully functional, This Dustomat-63 - Suction nozzle Ø: 160 mm - Main motor: 3 kW - Item description: mobile, CE-mark, 3 kW, Ø=160 mm - Filter cleaning Djdpfexakdkjx Afpeun - Mobile separator container - Rated volumetric flow: 1,850 m³/h

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration model, used only for testing purposes (occupational health and safety authority), dusted and cleaned. Dodpfxsw H Rp Aj Afpjun

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration model, used exclusively for testing purposes (trade association), intentionally dusted and cleaned. Right-hand version with connection diameter: 300 mm with flange JET cleaning system Motor power: 7.5 kW Filter area: 32 m² Nominal air flow: 5,089 m³/h Maximum air flow: 6,000 m³/h Vacuum at 20 m/s at suction port: 2,731 Pascal (in dusted condition) Collection volume: 3x160 liters 5-meter connection cable with 32A CEE plug Dimensions: see photo Duedpfxoww Erys Afpsn

Condition: new, WAM FLO dust collector extraction filter cabinet filter extraction installation Duodowyf Aqjpfx Afpon New Motor power fan 3kW 3000rpm Filter surface 22m2 Equipped with electro-pneumatic cleaned cartridges Stainless steel 304 Zero dust emission 7 pieces in stock See our other advertisements VMA Wekerom

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source Dedpfx Aevg U Dxjfpoun -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: excellent (used), Year of construction: 2019, Double-sided grinder Production date: 07.2019 New not used. 1) Net weight: 15000 kg 2) Dimensions: 2200 x 3100 x 3050 mm 3) Higher grinding speed 4) High precision Technical specifications 1) Grinding width (max): 1300 mm 2) Grinding thickness: 5-150 mm 3) Grinding length:> 700 mm 4) Abrasive belt speed: 25 m/s 5) Abrasive belt dimension: 1350 x 2800 mm 6) Total motor power: 163.25 kW 7) Grinding head motor: 75 kW x 2 8) Motor for feeding: 11KW 9) Lift motor: 0.75 kW 10) Brush motor: 0.75 kW x 2 Duedpfxot Dmmce Afpsn 11) Feeding speed: 10-30 M/min 12) Power supply: 380 V 50 Hz 13) Working pressure: 0.6-0.8 MPa 14) Extraction capacity: 24000m³/h a. Thickness of sanding boards in large range: 5-150mm. b. Machining plate thicknesses greater than 25mm with good quality. c. The upper and lower conveyor pressure roller adopts double power transmission, so that the transmission efficiency is increased and smooth operation is maintained. It can ensure grinding with high accuracy and good surface quality. d. To meet the needs of different plate processing, they used variable frequency and adjustable speed system and variable speed motor for conveying. e. Siemens electrical parts were selected as the main parts with long service life.

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Dodpfx Asuu Ntgofpjun Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: used, functionality: fully functional, Amano PiA-30U Dust collector Good working condition. Please check out our other listings as well. Dodpfxjryxmxe Afpjun

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) Dusdpent Uc Rsfx Afpon We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m Dsdpfsunh Uvjx Afpeun depth - 1.70m width - 1.25m

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Dsdpfx Ajyg Exqjfpsun Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

Condition: excellent (used), CATALOG NUMBER 7650 Technical Data: - Max working length: 1500mm - Max working diameter: 250mm - Milling (disc milling cutter): 7.5kW Dedpfjyh H Dbjx Afpsun - Spindle – 2800rpm 3kW - Spindle speed: 700/1200/1500/2000rpm - Grinding unit: 0.75kW - Hydraulic motor: 3kW - Total power: 17.75kW - Air requirement: 6-8bar - Feeder for blanks up to 150x150mm - Extraction port diameter: 100mm, 160mm - Transport dimensions (L/W/H): 4350x2300x1980mm - Weight: approx. 3000kg ADVANTAGES – German-made – Automatic hydraulic copy system – Original DTR documentation – Unpainted – Used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on an exchange rate of 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Dust cyclone Stainless, dust separator, used machine -inclusion dimensions: 1900x1600x6200mm - mantle size: diam. 1600x5200mm Duodpfx Afottvrfspen -stem dimensions: 630x310mm; diameter 280 - weight: 800 kg

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm Djdpfx Aox Rdgpofpoun - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Dodeh Ucqtopfx Afpeun Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Dedpfsiu Hq Dox Afpeun Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: good (used), mileage: 1,95,569 km, power: 250 kW (339.91 HP), first registration: 03/2015, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,320 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,500 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, retarder, traction control, = Other Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Recording Device) - Fixed - Short Cab - Power Take-Off (PTO) - Pump - Central Lubrication - Additional Brake System = Notes = Number of axles: 3, Configuration: 6x2, Curb weight: 16,105 kg, Gross weight: 28,500 kg, Total tank capacity: 1 liter, 2nd diesel tank, Fifth wheel coupling: Fixed, Number of diff locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Flashing lights, Engine power: 250 kW (335 HP), Fuel: Natural gas, Euro: 6, Transmission type: Opticruise, Gearbox type: Scania, Gears: 12, Additional brake system, Retarder brand: Scania, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, System type: Pusher 4000 OB, Pump, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Drivetrain Fuel type: Natural gas Transmission Gearbox: SCA, 12 gears, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Twin tires; Tire tread left inside: 9 mm; Tire tread left outside: 11 mm; Tire tread right inside: 7 mm; Tire tread right outside: 7 mm Axle 3: Lift axle; Steered; Tire tread left: 2 mm; Tire tread right: 5 mm Weights Unladen weight: 16,105 kg Payload: 12,395 kg Gross vehicle weight: 28,500 kg Functionality Pump: Yes Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 2 Dedpfx Afsxqxabjpoun Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Fair prices • Reliable business practice • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate and submit a request directly on our website. Ask about our European warranty package.

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms Dusdpfxjivta Nj Afpon mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: excellent (used), Extraction dust removal Nedermann type 663 Dujdpfxjiyyxco Afpen with 2 suction arms Very good condition, directly from production!!!

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Min. workpiece length: 400 mm - Max. length: 6000 mm - Max. workpiece width: 200 mm - Max. workpiece thickness: 200 mm - Roller motor power: 0.75 kW - Chain motor power: 1.1 kW - Feed rate adjustable via geared motor - Roller speed: 19 - 118 m/min - Belt speed: 10 - 60 m/min - 8 guiding belts - 17 steel feed rollers - Roller diameter: 80 mm - Roller height from base: 900 mm - Pneumatic pressing Djdpfx Aexfgpgjfpjun - Dimensions (L/W/H): 565 / 175 / 120 cm - Weight: ~ 1500 kg

Condition: used, Year of construction: 2017, filter area: 9.5 m², negative pressure: 2,200 Pa, total height: 2,200 mm, total width: 1,000 mm, total length: 1,800 mm, volume flow: 1,593 m³/h, overall weight: 350 kg, nominal flow rate: 1,447 m³/h, input voltage: 400 V, suction capacity: 1,593 m³/h, space requirement length: 1,800 mm, space requirement width: 1,000 mm, space requirement height: 2,200 mm, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), transport width: 1,000 mm, transport length: 1,800 mm, tank capacity: 240 l, transport height: 2,200 mm, No. 04517 Mobile extraction unit / mobile dust extractor Schuko Vacomat 140/160 XPe Unused, year of construction 2017, in new condition Dedoygbbhepfx Afpoun Extraction diameter 140 / 160 mm, can be changed using a reducer Residual dust value H3, 0.1 mg/m3 Suitable for extracting combustible dusts The Vacomat 140/160 XPe mobile dust extractor is ideal for single machine extraction. Air volumes of up to 1593 m3/h can be conveyed with this extraction system using the vacuum method, e.g. for dedusting sliding table saws, jointers or thicknessers. The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container. Viewing windows make it easier to check the fill level. The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure cell and guarantees maximum operational safety. In the Vacomat 140/160 XPe, a vibrating motor cleans the filter bags electro-mechanically. No connection to compressed air and therefore no compressor is required. It can be controlled via the query of the woodworking machine using potential-free contacts. The Vacomat 140/160 XPe mobile dust extractor is fitted with patented SchukoCone filter bags as standard. The SchukoCone filter bags are particularly suitable for fine dusts. Nominal volume flow 1447 m3/h Vacuum pressure 2200 Pa Motor power 400 V, 2.2 kW Filter area 9.5 m2 Filter material dust class “M” CE-compliant GS-tested Complete technical documentation available Transport dimensions approx. 1800 x 1000 x 2200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, roller length: 4,100 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * Lower and side rolls are connected to the body by hydraulic pistons and perform vertical linear movement * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * Roll positions are easily read via three digital indicators * Hydraulic opening head and automatic upper shaft lift allow easy removal of rolled parts * Easy operation using a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports to assist with large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-bending : 10/12 mm Bending : 12/16 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2250 mm Height : 2350 mm Dedpfxow Smc Ij Afpsun Weight : 22000 kg

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Dsdpfx Afoyffx Iepjun Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight: