Used Work Bench for sale (51,753)

Condition: good (used), Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation Hedpfx Aey Rx Egonyjt -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm -Weight: 218 kg

Condition: new, empty load weight: 4,400 kg, maximum load weight: 19,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, suspension: air, tire size: 235/75 R17,5, wheelbase: 8,795 mm, Equipment: ABS, | Krone AD Jumbo Flatbed Trailer 3-Axle New | Multilock outer frame along the entire length | Air suspension front and rear (raise/lower) | Turntable with ball bearing slewing ring, low-maintenance | 40 mm drawbar eye | BPW axles with drum brakes | Spare wheel holder | Dimensions (L x W x H): 8.60 x 2.48 x 0.93 m | Steel front wall 1.60 m | Wheelbase: 8,795 mm | Tyres 12x front/rear: 235/75 R 17.5 | Subject to error, change and prior sale. Hodpfjy H Ilzsx Anyot

Condition: excellent (used), KSE Leakage Testing System Hedpjzdzilsfx Anyot Here we offer a KSE leakage testing system. Testing system for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Hodpfx Ajzg Ex Nonyjt Fuel loading rate - Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from our location! Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Hodpfx Anozff A Esyst Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2013, loading space length: 13,400 mm, loading space width: 2,400 mm, Equipment: ABS, Rauw SA 393 Platform Lift Axle, SAF Axles, Wood/Machine Transporter with Wheel Arches Internal number for inquiries: 0326237 * ABS * EBS * 3-axle air suspension * Lift axle * SAF axles * Storage box on the right and left sides / plastic Cargo area length: Length: 13,400 mm * Width: 2,490 mm Tires: 1st axle: 265 / 70 R 19.5, 30% air suspension / lift axle 2nd axle: 265 / 70 R 19.5, 30% air suspension 3rd axle: 265 / 70 R 19.5, 30% air suspension Hedpfx Aeyvct Donyot ----Price: EUR 19,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale excepted.

Condition: new, Year of construction: 2023, Vaccum Mobile User video: Consisting of a movable table with 4 vaccum pads, a hand pad, extendable shelf for hand tools Hodponvkhlsfx Anyet Makita vacuum pump incl. charger, battery and hydraulic oil The Vac Up Mobil offers storage space for a vacuum cleaner and is height-adjustable up to 80 mm Lifting capacity approx. 70 kg L x W x H 705 x 670 x 950 mm Weight approx. 40 kg Availability: short term Storage location: Hochheim

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Hjdpozhkb Ssfx Anyst Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 Hodpsydi A Iefx Anyjt -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: used, maximum load weight: 36,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Loading platform: Loading platform with hardwood floor and rear slope of approx. 1,000 mm x 8° 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings that can be folded outward (LC 5,000 daN) 2 pairs of lashing rings that can be folded outward (LC 10,000 daN) Hodpfx Aezn Ec Dsnyjt Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Kingpin supports: JOST kingpin supports (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: BPW axles, air-suspended, with disc brakes (approx. 377 mm), with lifting/lowering function (ET 120) Axle tool Tires: Tires 435/50 R 19.5 Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paint finish: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red Rear section metallized and painted in RAL 9010 (pure white) Rims in silver Includes the following additional equipment: Yellow-red air couplings on the galvanized connection strip at the front 4 chocks with holder 2-inch kingpin Yellow reflector strip in accordance with EU regulations on the side and rear of the semi-trailer European reflector plates (red-yellow) at the rear of the semi-trailer Loading platform with robust hardwood floor 1 spare wheel holder under the loading platform on the right side in the direction of travel Galvanized folding supports under the slope of the loading platform 9 pairs of pocket rails for plug-in rails, approx. 100 x 50 mm, in the outer frame of the loading platform One mudflap at the rear of the semi-trailer Manual and description on a USB stick One holder for a rotating beacon at the rear of the semi-trailer One holder for warning signs including socket on the gooseneck and on the rear panel on the left and right Speed stickers 80 km/h at the rear and on both sides Load gauge for determining axle loads incl. load diagram One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle 2 INOX toolboxes under the loading platform on the left and right, approx. 600 x 350 x 600 mm 6 pairs of WADER container pockets in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container 3 pairs of pocket rail strips mounted transversely in the loading platform, for plug-in rails approx. 100 x 50 mm 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading status An acoustic warning signal when reversing 2 LED reversing lights mounted on the rear panel HRM metallization (High Resistance Metallisation)

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Specification: Hsdpfx Anoy R N A Aeyet Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Suitable for testing: Shut-off valves, control valves, safety valves Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction with through-bolted cross members * With extension of the chassis frame * Cover plate between the outer frame and the longitudinal member as tire protection for the rear wheels of the tractor unit * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, BPW three-axle unit ECO Air * With disc brakes Ø approx. 370 mm * ET 120 air suspension approx. 260 mm travel Vehicle tires * 6 x 445/45 R 19.5, 160J Chassis attachments * Mechanical landing legs with leveling foot, approx. 24 t lifting capacity * Single-sided operation on the right side of travel * Tool-free folding side protection on the right and left sides of travel * Spare wheel storage with winch incl. 1 wheel fastening set * Mounted behind the axle unit * Storage for 16 square tube inserts approx. 80 x 80 x 1,990 mm * Installation on the side of the longitudinal member on the left and right sides of travel * Plastic toolbox, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, installed on the left side at the rear * Rear right access ladder, extendable Brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection lines) * Parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system incl. 1 raising and lowering valve, mounted on the left side behind the axle unit * Driving position is automatically adjusted, 2 fail-safe coupling heads at the front ISO 1728 * Air reservoir for the brake system and air supply made of steel (EN 286-2) Floor * Plate floor approx. 30 mm thick, multi-layered glued plywood, floor at the rear sealed * Recess pockets for square tube inserts approx. 80 x 80 mm, arrangement according to drawing J9 * 8 pieces of recess pocket strips (18 recess pockets per strip: 4 pieces each on the outside + 10 pieces in the middle) Front wall * Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 Note * When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side walls and a rear tailgate/door! Side wall * VarioFix steel hole outer frame without stanchion mounts * 24 pairs of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring Hjdpszp Aycefx Anyjt Electrical system / electronics * Lamp carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium Package, consisting of * LED license plate light * LED marker lights and reflectors at the front * Flashing LED side marker lights * Superseal and bayonet connectors of the lights * 2 outline lights with arms mounted on a multi-chamber rear light * 2 multi-chamber rear lights * Adapter box permanently mounted with 2x7-pole socket (1 x ISO 1185 / 1 x ISO 3731, 24 V-N / 24 V-S) and 15-pole socket ISO 12098 * LED rotating beacon Compact orange with mounting t

Condition: used, Year of construction: 2024, total length: 7,090 mm, - Arbeitshöhe 16.21 m - Bodenfreiheit (Zugang) 0.38 m - Plattformhöhe 14.21 m - Maximale seitliche Reichweite 8.52 m - Ãœberhang / Knickpunkt Gelenk 7.59 m - Korbarm-Drehwinkel (oben / Boden) +66.50 ° / -65.80 ° - Tragfähigkeit des Arbeitskorbs 408 kg - Drehung des Oberwagens 350 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Anzahl Personen (innen / außen) 3 / 3 - Innerer Wenderadius 1.28 m - äußerer Wenderadius 4.09 m - Fahrgeschwindigkeit - Transportmodus 5 km/h - Fahrgeschwindigkeit - Arbeitsmodus 1 km/h - Steigfähigkeit 45 % - Zulässige Neigung im Arbeitsmodus 5 ° - Bereifung Schaumgefüllt Hsdpfx Aoxd D T Tonyjt - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 0 / 2 - Hersteller / Motor Modell Kubota - D1105-E4B - Motornorm Stage V - Nennleistung Verbrennungsmotor / Leistung 24.80 Hp / 18.50 kW - Bodendruck 11.50 dan/cm2 - Hydraulikdruck 340 bar - Fassungsvermögen des Hydrauliktanks 53 l - Fassungsvermögen des Kraftstofftanks 51 l - Umgebungsgeräusch (LwA) < 105 dB - Schwingungsbelastung Hand/Arm < 0.50 m/s² - Täglicher Verbrauch 7 l - Umweltschädliches NOX 5.80 kg

Condition: used, functionality: fully functional, Year of construction: 1996, operating hours: 1,000 h, power: 6 kW (8.16 HP), load capacity: 1,500 kg, mast type: simplex, lifting height: 70,000 mm, lifting power: 1,500 kg/m, platform length: 10,300 mm, platform width: 1,500 mm, overall weight: 5,500 kg, empty load weight: 3,000 kg, transport length: 4,500 mm, transport width: 1,800 mm, transport height: 88,000 mm, next inspection (TÜV): 06/2026, tire condition: 50 %, drive condition: 100 %, wheelbase: 1,500 mm, drive type: Elektrisch, lifting speed: 120 mm/s, type of input current: three-phase, working height: 1,50,000 mm, Climbing mast platform with 2 pcs. 3 kW SEW geared motors, modular system (each mast section is 1.5 m high, each base module is 1.5 or 0.85 m long) incl. extensive accessories and spare parts. New TÜV valid until 06/25. OPTION: The platform can be upgraded to a twin-mast version by purchasing additional mast sections or a second drive unit (see photo). Hodpfx Anjxqx S Djyet

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise -Manufacturer: ZS, solid vise -Clamping jaws: 150 x 25 mm Hedpjycfttsfx Anyjt -Wingspan: 215 mm -Dimensions: 440/170/H245 mm -Weight: 31.8 kg

Condition: good (used), Vise, bench vise, locksmith's vise, clamping vise, workbench vise, clamping vise, table vise -Manufacturer: Bernstein, Spannfix ball joint vise, rotatable 360°, tiltable 45° Hodox S Rq Repfx Anyjt -Clamping jaws: 45 x 25 mm -Wingspan: 90 mm -Table clamp: up to 82 mm -Transport dimensions: 310/10/110 mm -Weight: 1.4 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW Hjdsc Ibywopfx Anyet -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Condition: used, Drilling machine, bench drill, pillar drill, column drill Hjdpfx Aofla Risnyst -Handover: in its current condition as inspected -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle mount: MK3 -Travel distance: 500 mm -Protrusion: 300 mm -Columns: Ø 110 mm -Spindle stroke: 150 mm -Translation about: V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg

Condition: good (used), Double bench grinder, bench grinder, column grinder, column grinder Hedsd Tih Sspfx Anyet -Motor power: 1.1 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 32 mm -Operating voltage: 380 volts -Dimensions: 830/600/H1200 mm -Weight: 231 kg

Condition: good (used), Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise Hodpfx Aokvrpwenyot -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors Hjdpfx Anju T Hhkeyjt This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Hsdpjttg S Uefx Anyot Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: like new (used), Year of construction: 2021, load capacity: 1,000 kg, lifting height: 600 mm, empty load weight: 156 kg, Manual scissor lift pallet truck. Can be used as a workbench. Brand: Still. Year of manufacture: 2021. In very good condition. Capacity: 1,000 kg. Video to follow. Hjdpfx Anezg I E Ssyot

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 700 mm, total width: 1,600 mm, total height: 850 mm, Work table AT 1600 with stainless steel top and sliding doors Hjdpfszfxykjx Anyst Work table, baker's/pastry chef's table with stainless steel work surface and shelf at the back sliding doors with intermediate shelf underneath stainless steel design Dimensions approx.: 1600 x 700 x 860 mm, W x D x H Used equipment Come and visit us!

Condition: used, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, Equipment: ABS, Schmitz Cargobull SPL 24/L-13.62EB Platform Trailer * Platform semi-trailer * Front wall, 1,200 mm * 12 container locking devices / twist locks: 1 x 40 ft, 2 x 20 ft and 1 x 20 ft * Continuous lashing points in the outer frame * 4 extendable warning signs with position lights * Longitudinal beam height at the front: 156 mm, at the rear: 428+28 mm, Smart Generation * Premium distributor with 3 sockets: 2x7-pole DIN ISO3731+DIN ISO1185+ ISO12098 * 8 pcs. additional lashing beam pockets in the center of the 8 t floor, for lashing beam 70/70 * 8 pairs of additional lashing beam pockets with lashing beam securing in the outer frame for lashing beam 70/70 * Strength per additional lashing beam: up to 400 kg at a height of 1 meter * 1 row of lashing beam pockets 70x70 across the load securing, approx. 2600 mm in front of the front wall * Open storage box on top for additional lashing beams * Lashing points: 16 pairs, 4 tons tensile force per eye, according to EN 12640 * 28 mm plate floor, max. 8000 kg forklift axle load, strength test according to DIN EN 283 * Air suspension * Air control system * Lift axle * Disc brakes Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Hedpfx Ajt Dhfmjnyjt Legal information: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and thus does not constitute guaranteed characteristics.