Coming up for sale:
1 piece used copy router / engraving machine
Manufacturer: WMW
Model: FG250x500
travel x-y-z: 280 - 200 - 315 mm
stencil table / work table: 380 x 380 // 500 x 250 mm
speed range: 2.500 to 20.000 rpm
accessories: rich type set, see photos
power requirement: 0,25 kW
Bxf7py0a8m
condition: very good
weight: 0,5 t
dimensions: 1.200 x 1.000 x 1.400 mm
Machine can be inspected.
bore capacity in steel (diameter): 32 mm
throat: 230 mm
bore stroke: 160 mm
spindle taper MT: 3
feed - manual: Handhebel mm
revolution per minute: 100...2000 U/min
headstock adjustment: 180° Grad
headstock traverse: in Höhe/height/altura 350 mm
clamping surface area: 1020x615 mm
height over floor: 860 mm
column diameter: 102 mm
total power requirement: ca. 1,2 kW
H2joz2l
weight of the machine ca.: 0,5 t
space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m
equipped:
- toothed drill chuck up to...
used, built in 1977, mach. No. 2755
for plastic and aluminium profiles
Ehe8lqn
Catalog No. : 5485
Type: Mistral 1250
Producer: Comagrav
Made in: 2004
Characteristic:
Length of the working table: 1250 mm
Width of the working table: 1250 mm
Maximum rotary speed of the vertical spindle: 24000 1/min
Bv3gtzxydj
Spindle: COMAGRAV 2000 W
Equipment:
High pressure vacuum table (without pump)
Collets
Frequency converter
Wrench
Table milling machine, table milling machine, sliding table saw, table saw
-Transfer: in the current condition as seen
-Table milling machine: with rigid spindle
-Sliding carriage:
Easuqvxko
-Speeds: 2,700-6,000 rpm
-Size circular saw: not swiveling
-Sliding carriage: 710 mm
-Saw blade diameter max 400 mm
-Height adjustment:
-Max. Cutting height: 85 mm
-Long hole drilling machine:
-Eccentric clamping:
-X axis: 70 mm
-Y axis: 130 mm
-Z axis: 140 mm
-Cutter holder: 16 mm
-Dimensio...
Rotatable support table between 0 ° and 180 °, thus 3-sided machining in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute can be preselected, so both steel and aluminum profiles can be processed 4 pneumatically controllable copier pens Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Rod length: 490 - 3,000 mm Weight: approx. 350 kg
Bww9p9x
Double bench grinder REMA
grinding wheel diameter: max. 400 mm
grinding wheel speed: 1400 rpm.
motor power: approx. 2,2 kW
Power supply: 380 Volt, 50 Hz
- pivoting material support
Qfmzrhxd
- Metal substructure
Own weight: approx. 300 kg
bore capacity in steel (diameter): 20 mm
throat: 215 mm
bore stroke: 100 mm
Distance spindle/table max.: 445 mm
headstock adjustment: 250 mm
spindle taper MT: 2
range of revolution per miute: 0 ... 2600 U/min
feed:: manuell
threading: M4 - M10
spindle stroke: für Gewindebohren: 2...100 mm
table surface area: 340 x 280 mm
total power requirement: 3,0 kW
machine weight ab.: 160 kg
dimension L-W-H: 480 x 620 x 1295 mm
Table details (underframes)
I3owbi0
L: 650 x W: 650 mm x H: 850 mm; Weight: 110 k...
- NEW -
Manufacturer Sjöbergs
Type JUNIOR / SENIOR
Description:
- This workbench is a creative workplace for both children and adults.
- The stable workbench with two (!) Working heights 640/860 mm and a variety of functions
For carpentry and crafts
- Cabinet 0022 fits only to senior height
- Particularly clever for all users - small or large: the double bank hook series!
Delivery:
Pfsj9
- Undercarriage with 2 possible heights (640 and 860 mm) made of Polarkiefer
- Worktop made of Nordic b...
Catalog No. : 5486
Type: Mistral 1600
Producer: Comagrav
Made in: 2017
Characteristic:
Length of the working table: 1600 mm
Width of the working table: 700 mm
Maximum rotary speed of the vertical spindle: 24000 1/min
Spindle: COMAGRAV 2000 W
Equipment:
Collets
Frequency converter
Wrench
High pressure vacuum 40m3/hour (1.25 kW)
Spray cooling
Jw0npm
Z-axis automatic sensor
Workspace covering
Dust and chip extraction
3-phase industrial extractor 1.1 kW (1560 m3/hour)
Suction antista...
Bench vise, locksmith vise, parallel vise, pipe vise
-Vise: on a solid base plate, can be clamped as a machine vice
-Jaw width: 125 x 25 mm
Bvdprwwju7
-Span width: 200 mm
-Dimensions: 450/200 / H240 mm
-Weight: 35 kg
Technical data for endurance test bench:
Operating voltage: 400V/ 50 Hz
Control voltage: 24V
Pneumatic connection: 6 bar
Mass: approx. 1200 kg
Electronic air purifier installed:
Model: RON/A 60 DV
Manufacturer: ELBARON
Year of construction: 2015
Weight: 32 kg
High voltage: 230 VAC, 50/60 Hz, 0.380 kW
max. 9.3 kV DC
U8zigd0z
max. 12 mA
pulling capacity ca. 600 kN
drawing speed stufenlos 0 - 40 m/min
300 mm
power capacity ca. 150 kW
ca. 14.000 mm
ca. 19.000 mm
schwenkbar 9 Stück
rechts und links
Bwkd3tapvm
power capacity 129 kW
0 - 850 U/min
Autec, Bj. 2006
Profile height: 150 mm max Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spraying device 2 pneumatic copying pins with copying pin 5/8/10 mm
Bxc29pdi9g
Table boring mill
Fab. UNION Typ. BFT 110 NC
year 1986, retrofit 2006 by Union
Make: UNION
Type: BFT 110 NC
Year of manufacture: 1989
Control type: iTNC 530
spindle diameter: 105 mm
x-travel: 1750 mm
y-travel: 1250 mm
z-travel: 800 mm
B-axis popular angle
w-travel: 480mm
Bxbgqhdyty
Spindle mounting: DIN 280-A50
Table size: 1250 x 1400mm
max. workpiece weight: 400 kg
spindle speeds: 4 - 2500 rpm
rapid traverse X, Y, Z: 10.000 mm/min
rapid traverse W axis 5000 mm/min
electrical design: 380/50 V/...
RouterCasadei R32 MK/1
Year of construction 1995
507kg
380V
5.1kW
Bxekibuw0o
9.5Amp
Bench drill, bench drill, column drill, pillar drill
-Right-left rotation
-spindle taper: MK2
-Clamping table: 230 x 180 mm
-Projection: 190 mm
-Speeds: 240 - 4000 rpm
-Column diameter: 65 mm
-Spindle stroke: 80 mm
-Motor power: kW
-Number: 1x drilling machines available
-Price: per piece
-Dimensions: 300/660/H840 mm
-Weight: 99.5 kg
Ibkcsdp
bore capacity in steel (diameter) 16 mm
B7qipegm
throat 200 mm
bore stroke 80 mm
speeds 6 / 160 - 1600 U/min
spindle taper MK 2
column diameter 70 mm
table-size 280 x 200 mm
total power requirement 0,55 kW
weight of the machine ca. 140 kg
dimensions of the machine ca. 0,32 x 0,68 x 1,56 m
Condition: ready for operation
Digital readout Hub der Spindel
Speed change via V-belt disc
Electric drill on stand with digital display for the spindle stroke.
The machine was originally a drilling an...
DAHLHAUS / VALDARA /DEMAG
EAVZ8 / u.a.
VALDARA
length ca. 12.000 mm
Bwkd9i2cjv
width ca. 3.000 mm
ca. 3000 mm breit
roll surface width ca. 500 mm
DAHLHAUS EAVZ8, Bj. 1967
pulling force - max. 392 kN
625 kN
für 4.200 - 15.500 mm
max. 180 mm
max. 200 mm
max. 240 kg
max. 50 kg
max. 300 mm
ca. 5.000 x 8.000 mm
Demag
weight max. ca. 1,25 t
ca. 35 lfdm
hydraulic power unit Rexroth
1
tool holder B 12
Pjoc7
speed 1 x 450-9000 rpm, 1 x 225-4500 rpm
table 1300x500 mm
2 heads, each in height adjustable and turnable
ROUTER type COSMEC KV 1000 C
second hand
Kqfi3e09
Throat clearance mm. 1000
Spindle speeds rpm 9.000/18.000
volt. 380 / 50
length 2000 mm
width 700 mm
work height max. 900 mm
dimensions of the machine ca. 2,0 x 0,7 x 0,9 m
weight 160 kg
Bu3cqnprjr
Double bench grinder, bench grinder, column grinder, column grinder
-Manufacturer: VEB, bench grinder type SE 2x315/1
-Grinding wheel: max. Ø 315 mm
-Circumferential speed: 45 m/s
-Motor power: 1.0 kW
-Operating voltage: 380 volts
Btxakc97rk
-Accessories: incl. Grinding wheel dresser, see photos
-Dimensions: 640/890/H1070 mm
-Weight: 248 kg
bench grinder
brand MIC SCHAAN
Pjwa9
type DWSOR
pulling capacity max. 784 kN
max. 2.354 kN
4.300 - 9.300 mm
max. 320 mm
max. 240 mm
max. 350 kg
max. 80 kg/m
max. 300/400 mm
max. 300 x 50 mm
8
T3fdl7g
height ca. 3.000 mm
ca. 2.000 mm
weight max. 1.000 kg
Demag
drive motor ca. 200 kW
ca. 35 lfdm
hydraulic power unit Rexroth
Press brake of the company Prod-Masz on site to try out and take away.
You will get professional instruction on the spot.
Press brake ZGR2500/1,2
-working width 2640mm
-sheet thickness up to 1,2mm
-bending angle up to 145
-gas pressure springs
-degree scale
-Stop for preset bending angle
-Front depth stop
-Shelf for sheets
Buzwwz7tpg
-Weight approx. 400kg
Other dimensions (1000,1400,2140,2640,3140,3640,4140mm ) on request
Accessories-roll shear(up to 0,8mm) 290EUR
All prices are subject to 16% V...
bore capacity in steel (diameter):12 mm
throat:220 mm
bore stroke:60 mm
thread capacity:6M
Cqqi7wmu
table-size:300x250 mm
turning speed range - spindle:120-6000 U/min
bore capacity in steel (diameter) 13 mm
throat 180 mm
bore stroke 70 mm
table surface area 235 x 170 mm
workpiece height max. 550 mm
spindle taper MT 2
Noicp
spindle turning speed range 480 - 4000 U/min
voltage 400 V
total power requirement 0,45 kW
weight of the machine ca. 158 kg
dimensions of the machine ca. 0,80 x 0,55 x 1,90 m
- Serial-No.: 162276
Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder
-Double bench grinder with: water cooling
-grinding wheel: max. Ø 450 x 63 mm
-Speed: 950 rpm
Bdbrhrzf3j
-Motor power: 3.3 kW
-Operating voltage: 380 volts
-Number: 2x grinding machines available
-Price: per piece
-Dimensions: 370/370/H1090 mm
-Weight: 404 kg
Cutting bench, cutting shear
Type: Hydraulic
Manufacturer: Beyeler
Type: CP 3100x16
Cutting width: :3100mm
Bxeftulfc3
Cutting thickness: 16mm
Electric back-gauge
-With output-leveller-conveyorbelts
-With Sick light-curtains
Maximum disc diameter: 500 mm (currently 400 mm mounted) Very stable design
Bonbyn33is
Double grinding stand GREIF type DV 35
machine. No. 50063 Year of construction approx. 1970
Gcjjkijxy
grinding wheel diameter max. 400 mm
grinding wheel width max. 50 mm
grinding wheel speed 1420 rpm.
Mains connection 380 Volt, 50 Hz
motor power 2,2 kW
- Suction connection Ø 90 mm
- 1 piece grinding wheel Ø 260 mm
- 1 piece brush disc Ø 280 mm
Dimension L x W x H 1100 x 500 x 1250
weight approx. 300 kg
good condition
Siemens 6GK5873-0AA10-1AA2 Router , serial number as per photo, unused in sealed original packaging, 100% functional
Bjiunioaon
DEALER Company PROD-MASZ.
ABKANTBANK-Technik Halver,
YOUR competent partner in the matter of BENDING BANKS
Professional press brake ZGR3200/0,8 of the company Prod-Masz on site to try out and to take away.
You get professional instruction on the spot.
-working width 3200mm
-sheet thickness up to 0,8mm (non-ferrous metals)
-bending angle up to 145
-Outlet: 80 mm
-degree scale
-stop for preset bending angle
-Shelf for sheets
Bit7wqztgx
-Front depth stop
-Weight approx. 600kg
-Certificate CE
-12 mo...
Double bench grinder, bench grinder, column grinder, column grinder
-Manufacturer: Cordia, double bench grinder type DOTN-150
-Grinding wheel: max. Ø 150 x 25 x 20 mm
-Motor power: 0.35 kW
-Speed: 3000 rpm
-Operating voltage: 380 volts
-Dimensions: 410/200 / H1045 mm
-Weight: 33 kg
Xyalufrf
Cutting bench, cutting shear
Type: Hydraulic
Manufacturer: :Safan
Gfyuq89
Type: :HVS.13-16
Cutting width: 3100mm
Cutting tickness: 16mm
Electric Back gauge.
Double Bench Grinder LSE 400
Year - Serial-No. -
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Ci82ea30
-On Stock Emskirchen / Nürnberg - Can be test-
DESCRIPTION
Guaranteed concentricity of less than 0.02 mm measured in the drill quill
Drilling spindle with precision ball bearings
High quality keyless chuck
Drilling depth stop
Precisely crafted, stable drilling table with diagonal
T-slots and all-round cooling water channel
V-belt cover with safety switch
One-piece die-cast aluminum quill lever
with soft grip handles
Separate emergency stop impact switch
TECHNICAL SPECIFICATIONS
Oy0xf
Dimensions and weights
Length (product) approx. 565 ...
CNC MILLING MACHINE 1400*2600 mm with blower
CNC MILLING MACHINE WITH 1400*2600 mm workspace and blower is designed for milling the soft materials (wood, plastic, aluminium, polystyrene, foam)
The used type of spindle and milling tool is determined by the milling speed.
Basic speed for the wood milling is 4m/min. The machine is with bearings, fully equipped with linear guidance and special designed transmitter for the backlash elimination. The toothed rack provides unit movement.
Optional : S...
Press brake RED ZGR-2200/1,2 of the company Prod-Masz on site to try and take away.
You will get professional instruction on the spot.
Technical data:
- Working length: 2060 mm
- Bending capacity: up to 1.2 mm
- Bending angle: max. 160 degrees
- bending beam thickness: 15 mm
- upper beam stroke: 80 mm
- weight: approx. 420 kg
- Lifting of the upper beam in three positions
Equipment:
- Degree scale
Dyavja
- angle stop
- rear frame
- front depth stops
-Certificate CE
-12 months warranty
accessorie...
Drill press, drill press, stand drill, pillar drill
-Table size: 430 x 615 mm
-spindle taper: MK4
-Projection: 365 mm
-Speeds: 63-800 rpm
-Spindle stroke: 195 mm
-Transmission
-Feed: 0.1-0.4 mm/rev
Bcszqvwkfp
-Water cooling
-Dimensions: 730/1040/H2640 mm
-Weight: 1026 kg
Cutting bench, cutting shear
Type: Hydraulic
Manufacturer: :LVD
Type: :MV-4
Cutting width: 3100mm
Cutting tickness: 4mm
R8kcsw2c
Electric Back gauge.
Schmid Alkaline texturing, wet bench texturing with Wafer Handling for loading and Unloading of Wet Bench of Jonas & Redmann, Typ 56
M1 - load
M2 - texturing process
M301 - HF/HNO3-flush
M302 - dry
M4 - texturing process
M5 - HF/HNO3-flush
M601 - KOH-process
M602 - KOH-flush
M7 - HCL/HF-process
M801 - HCL/HF-flush
M802 - dry
400V, 50 Hz
Made in Germany
CE
Chiller frifofluid impianti s.r.l. FWC 60/CW-LT (S/N 14035, Bj. 2009, 400V/3Ph/50Hz, R407C)
SWI00834
Handling - loading:
Jonas & Redmann
T...
bore capacity in steel (diameter) 20 / 25 mm
throat 285 mm
bore stroke 140 mm
spindle taper MT 2 MK
column diameter 105 mm
spindle turning speed - stepless 60-1400 U/min
Drive 0,55 / 1 kW
distance spindle/base plate 245 - 675 mm
base plate 400 x 425 mm
distance between table/spindle 145 - 465 mm
weight of the machine ca. 280 kg
range L-W-H 1 x 0,8 x 2,03 m
Coqju79
Electric 380 Volt
Base 690 mm
intermediate table 430 x 380 mm
Stepless turning speed regulation
Machine dealer with own stock...
Used machine
Year of manufacture 1990
Qvtnphwp
Condition: workshop checked
stand projection 750 mm
spindle stroke 100 mm
max. passage between table and spindle 310 mm
spindle speed 10000/20000 rpm
motor power 2,2/3,3 kW
Revolver depth stop adjustable 6 pieces
Outer dimensions 905 x 1380 x 1600 mm
Weight 533 kg
Availability: short term
Location:Röllbach
DEALER Company PROD-MASZ.
ABKANTBANK-Technik Halver,
YOUR competent partner in the matter of BENDING BANKS
Bending bench of the company Prod-Masz on site to try out and take away.
You will receive professional instruction on site.
Press brake ZGR2500/0,8
-working width 2640mm
-sheet thickness up to 0,8mm
-bending angle up to 145
-gas pressure springs
-degree scale
-Stop for preset bending angle
-Front depth stop
C7mrfbr
-Shelf for sheets
-Weight approx. 350kg
Other dimensions (1000,1400,2140,264...
Double bench grinder, bench grinder, column grinder, column grinder
-Manufacturer: BBC, bench grinder type SRK 02C-4X
-Motor power: 0.46 kW
-Speed: 1380 rpm
-Operating voltage: 380 volts
Phxbl
-Dimensions: 350/240 / H1060 mm
-Weight: 33 kg
