Used Xas 125 for sale (6,076)

Condition: good (used), Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm Ledpoxrz Aujfx Aanjak -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Lasdpfsxran Nox Aansk Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left With tools as shown in the picture

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. Laodpju Idw Ijfx Aanjk *

Condition: excellent (used), Year of construction: 1999, x-path 1,250 mm y-path 880 mm z-path 800 mm Lajdjgypabopfx Aanjk Main spindle: Speed range - main spindle max. 12,000 min/-1 Drive power - main spindle 15 / 10 kW Table clamping area 1,500 x 1,050 mm Number of tool positions 30 pos.

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Lodpfoct Dhajx Aanjak Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Condition: ready for operation (used), Hello, the machine is in very good condition. Please let me know if you are interested. Lodpfx Aexu H Sgjanoak

Condition: new, Cutting area round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting area round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting area round 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m / min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw arm can be tilted up to 60 - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Stable saw arm for low-vibration work - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Environmentally friendly, as there is no need to use lubricants and coolants - Ideal for use on construction sites due to its low weight Laedpjilk Ekefx Aansk - Underframe optionally available (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Underframe available at an extra charge: 149 Euro net

Condition: used, Year of construction: 2004, operating hours: 20,676 h, overall weight: 4,100 kg, rotor diameter: 370 mm, number of blades: 37, rotor width: 1,300 mm, power: 55 kW (74.78 HP), 1 corrugated shredder plant for shredding: paper, chipboard, various plastics Lasdpfxoxwa T No Aanek Chain conveyor belt width 1000 mm Screw drag chain conveyor KKF 500-1K-U/TS315 Individual sale possible!!!

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: Ljdpfju Idwbjx Aanoak - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec Lsdpfx Ajvut D Tsanoak feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine; it is connected and can be tested. A video of the machine can be sent via WhatsApp. Swing diameter over bed: 1250 mm – Swing diameter over support: 1000 mm – Turning length: 6000 mm. Lajdoxwqk Ejpfx Aansk

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted Lodpfx Aasxpqzzoneak - Fork entry pockets/forklift attachment Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1190 mm Good condition Suitable for collecting, storing and transferring recyclables

Condition: new, Undercarriage suitable for the mobile bandsaw MIOTAL® S 125 G Ljdpow Hxduofx Aanoak

Condition: used, Year of construction: 2022, operating hours: 267 h, maximum speed: 40 km/h, front tire size: 440/65 R28 | 0%, rear tire size: 540/65 R38 | 0%, tire size: 540/65 R38, Tyres (front): 440/65 R28, Tyres (rear): 540/65 R38, Operating hours: 267 Basic equipment / technical data Engine Rated power (ISO): 94 / 125 kW / hp at 2200 rpm Max. power: 97 / 131 kW / hp at 2000 rpm Max. torque: 520 Nm at 1500 rpm Manufacturer / Type: Agco Power / 44 MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4 valves per cylinder, Stage V Controlled turbocharger, SCR catalyst, DOC diesel oxidation catalyst, SC diesel particulate filter Idle speed 850, with parking brake engaged 720 rpm One-piece, foldable clear-view engine bonnet Exhaust pipe on the right side in front of the cab Fuel tank capacity: 200 litres / AdBlue 20 litres Transmission / PTO 24/24-speed Dyna-6, SpeedMatching, AutoDrive, 40 km/h ECO PowerControl lever on the left with powershuttle, clutch control, 4-step powershift with single lever, semi-automatic range shifting and Autotronic monitoring Permanently cooled wet travel clutches with independent lubrication system 2-speed switchable PTO: 540 / 540E / 1000, 1 3/8" 6-spline shaft PTO mode switching electrically from the cab PTO START/STOP button on the left rear fender Lsdpfx Aev T I Azoanoak Hydraulics / Linkage Load Sensing hydraulics 110 l/min Leak oil collection at quick couplers, Load Sensing lines with couplers (PowerBeyond P,T,LS) 1st & 2nd remote valve electrically controlled, MicroJoystick on MultiPad 3rd & 4th mechanical remote valves OC: s/d, MR, EA + d, EA, SST

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min Lodpfxou Nfibj Aansak distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, nominal force 100 t Lodjvuk N Tjpfx Aanjak stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation

Condition: excellent (used), functionality: fully functional, I am selling this machine, connected and can be tested. Can send a video of the machine via whatsapp. Swing diameter over bed: 1250 mm Swing diameter over slide: 940 mm Center distance: 5000 mm Lasdpfev Nw D Hsx Aanok Spindle bore: 102 mm

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm Lajdpfx Ajxp Ry Doanok max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: excellent (used), Year of construction: 2000, Engel ES 500/125 HL Clamping Force 125 tons Lsdpfx Aajxu Rqtjnoak Year of manufacture: 2000 Screw diameter: 45 mm Injection volume: 318 cm³

Condition: refurbished (used), Year of construction: 2022, Technical Specifications Brand: TRANE Model: RTAD 125 Ljdpfekw D Acox Aanoak Cooling Capacity kW/h: 430 kW/h Cooling Capacity Kcal/h: 370,000 Kcal/h Evaporator: Shell & Tube Condenser: Aluminum Fin Copper Tube Compressor: Trane Compressor Model: 2 x CHHP0M2TK Control Panel: Trane Adaptive Control Dimensions (mm): 2260 x 3600 x 2068 Weight (Kg): 4500

Year of construction: 2018, condition: used, Technical details: lifting capacity: 0,125 t swival range : 180 ° Arm length: 4000 mm arm length:: Säule - Kranhaken: 3850 mm height lower edge cantilever arm: 3000 mm column diameter: Ø 220 mm rotation: 270 ° Laedpfx Aaju Utmpsnjk Dimensions of the crane assembled: LxWxH: 4800 x 1300 x 3250 mm Dimensions of filling container: LxWxH: 1100 x 1000 x 740 mm Column height: 3200 mm Heavy-duty operation = manual with swivel stop Hoist: Hans Hebetechnik load capacity 1000kg; lifting height approx. 2400mm; hook Ø 30mm with rope safety device; travel distance hoist 2700mm; control via pendant control The crane can be moved via the filling container. *

Condition: excellent (used), Year of construction: 1995, Krauss-Maffei KM 125-620 C1 Clamping force: 125 tons Year: 1995 Laedpfx Aoxu Rk Hjansk Screw diameter: 50 mm Injection volume: 377 cm³ Shot weight: 343 g Tie bar distance: 47x47 cm

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. Ledju Idvkepfx Aansak *

Year of construction: 1979, condition: used, Technical details: Flow rate: 400 m³/h negative pressure : 1250 pa motor: Typ B5-71 mit 2850 U/min connection electric: 380 V total power requirement: 0,37 kW weight of the machine approx.: 35 / 28 kg dimension machine xH: Ø 0,5 x 1,3 m Trockenabscheider mit Ventilator, beide Geräte stehen als Ersatzteilspender zum Verkauf! Nr. 1 = 400 m³/h BJ 1979 (Zustand: Motor i.O., Saugprozess außer Funktion) Nr. 3 = 400 m³/h BJ 1979 (Zustand: unvollständig!) Dry separator with fan Nr. 1 + Nr. 2 (Nr. 1 = 400 m³/h + Nr. 3) Suction nozzle Ø 40 x 50mm Operating temperature 50°. Filter space = approx. Ø 400 x 500m Laedpfsu Nwwqjx Aansk i.D. *

Condition: used, Technical details: number of spindles: 9 Stück weight of the machine ca.: 10,2 t Laedou Idwnopfx Aansk Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *