Used Xas 125 for sale (3,532)

Condition: used, Year of construction: 2007, mast type: simplex, Charger Kdjdpjyvcnbjfx Abcji Mast type: Standard

Condition: good (used), Year of construction: 1987, functionality: fully functional, 1 x optical profile sanding machine Doebelie OP 125 X year of construction:1987 with dust extractor Esta KK 5 S in good condition. Kdsdpfx Aboqu Rh Nscji The machine can be inspected under power.

Condition: good (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 9,140 kg, lifting height: 12,500 mm, tire size: 15.5-25, Year of construction: 2018, machine/vehicle number: 2467618, Equipment: all wheel drive, cabin, Technical Data Kjdpfoyqzt Esx Abcedi Year of manufacture: 2018 Engine: 55 kW diesel Rated load capacity at LSP: 3.5 t Load center: 500 mm Transmission type: W Load capacity at max. reach: 1.2 t Load capacity at max. lift height: 3.5 t Tyres: 15.5-25 Reach: 8.0 m Lift height: 12.5 m Weight: 9.14 t Travel speed: 29 km/h Fully functional, general signs of use

Condition: used, Year of construction: 2006, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B - axis -30 - +180 ° tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min Kodpfx Absyui Ncecodi power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Spindle new 10/2025 Turning-table overhaul 2022

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 12,500 mm, mast type: telescopic, Year of construction: 2023, operating hours: 283 h, General information Year of manufacture: 2023 Technical information Engine capacity: 3.000 cc Drive: Wheel Engine type: JCB 430 TA5-55 Empty weight: 10.020 kg Dimensions (LxBxH): 580 x 235 x 259 cm Functional Lifting capacity: 3.500 kg Quick coupler system: Yes Kdedpjyvdvtjfx Abcei Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Pallet forks - Quick change = Remarks = Drivetrain Internship / Tier: Stage V / Tier IV final Condition CE type: CE Fork carriage, Support legs

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 1,25,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Kdsdpfeyl A Exex Abcji Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: used, mileage: 4,80,000 km, power: 294 kW (399.73 HP), first registration: 12/1999, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, loading space length: 4,750 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, Equipment: air conditioning, crane, * Mercedes-Benz 1840 Actros MP1 2-way tipper with Hiab crane * First registered in 1999 * 480,000 km * Euro 2 * Double H-gear transmission * Leaf-spring air suspension * 4x2 axle drive * Air conditioning * Hydraulic tow bar * Tipper body: 4.75 x 2.45 x 1.10 m * Wheelbase: 4.10 m * Unladen weight: 10,620 kg * Crane: Hiab 125-3 * 3 hydraulic, 1 mechanical Kjdpfxjyq A Aho Abcodi * 1,050 kg at 10 m * Max. weight: 6,000 kg * Radio control * Grab control * High seat

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D Kdedpfowdta Esx Abcei - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, Year of construction: 1992, faceplate diameter 1250 mm swing diameter 1400 mm turning height 980 mm table load 3 t Control Siemens type Sinumerik 880T x-axis 1000 mm z-axis 1000 mm w-axis 600 mm c-axis 360 ° Tool changer 62 Pos. grinding head horizonzal grinding head vertical power capacity - table 69 kW weight of the machine ca. 26 t dimensions of the machine ca. 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Kdsdpfxjyt Rzds Abcei If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1979, spindle diameter 125 mm x-travel 2500 mm y-travel 2100 mm spindle taper ISO 50 spindle turning speed range 5-1000 U/min spindle travel 900 mm radial face slide travel 250 mm weight of the machine ca. 25 t Table, Floorplate, tools The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Kedpfjyutt Sjx Abcedi Your Markus Hirsch Team

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t Kdjdpfx Absvut D Tjcoi required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL Kodpfx Asylzw Hobcedi as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Pressing force: 125 tons Column gap: 1050 mm Kdjdpsguvtlsfx Abcji Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Kdjdpfxsflt Ebj Abcei Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Kodpfxefim Thj Abcsdi Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: used, Year of construction: 2014, functionality: fully functional, overall weight: 80 kg, jaw width: 160 mm, total length: 650 mm, total width: 160 mm, jaw height: 50 mm, clamping width: 160 mm, clamping range: 495 mm, 5 pieces Allmatic TC 125 high-pressure vices with extended clamping width up to 495mm. 1 piece Allmatic Type 125, clamping width 202mm 4 pieces HOMGE HPAQ-160 mm, clamping width up to 490mm Prices are per unit Kjdpjytc Iiofx Abcodi All vices are fully functional with normal signs of use. Clamping accessories for the vices are included. Inspection possible by prior appointment. Shipping available at buyer's expense.

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Kodpex Ituqjfx Abcjdi Internal pressure sensor

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine brand Krauss-Maffei and type 125-520 C2 The machine was in a company that attaches great importance to cleanliness and maintenance Year of manufacture 2004 Pneumatic valve gate 2X Hydraulic core pull 83000 production hours Clamping force of the mold: kN 1500 MC 4 control system with color monitor, integrated control panel 4 additional cylinders 1* D35 /2* D40 / 1* D45 additionally included Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Kdjdpfslkbhwex Abcji For more information or to contact us, please visit our website

Condition: new, Year of construction: 2025, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Kdedjw A E U Sepfx Abcji Emission level: Stage V / Tier V Transport dimensions (LxWxH): 2,25x1,35x2,25 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel - Tank

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. Kdodjyuql Eepfx Abcei total power requirement 25 kW

Condition: used, spindle diameter 125 mm x-travel 8000 mm y-travel 3000 mm spindle bore 240 mm w-axis 1650 mm total power requirement . kW Kodpjyuqkusfx Abcedi

Condition: used, spindle diameter 125 mm x-travel 2800 mm Kdedpfx Absyuqffocoi y-travel 2000 mm z-travel 2500 mm number of spindle speeds 3,55 - 710 (27x) taper ISO 50 voltage 400 V total power requirement 18,5 kW

Condition: used, spindle diameter 125 mm spindle travel 1130 mm column travel 6000 mm headstock travel cross 1700 mm column travel on cross-slide 400 mm spindle speeds 2,24 - 450 (27x) U/min volt 380 V total power requirement 14 kW Kdodpfeyuqc Rex Abcji Facing head D.R.O.

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg Kdjdjxxz E Nopfx Abcsi

Condition: good (used), Swing over bed 270 mm Kedpfx Abetwpyajcsdi Center Height 125 mm Distance between centers 600 mm Spindle speeds 30-5000 rpm Control: FANUC 18i Manual Guide Misc. accessories MARCELS MASCHINEN CH