Used Yag Laser for sale (2,685)

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 2,000 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 7,000 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 6,000 mm, space requirement width: 2,500 mm, Equipment: cooling unit, safety light barrier, G3015 HF Mini S 6KW Fiber Laser Cutting Machine The HF Mini S is a high-quality, very compact fiber laser cutting machine. Your perfect entry into laser part production. This machine is ideal for small steel fabricators and sheet metal processors who want to cut up to 25mm (with 6kW steel laser power) and minimize post-processing of the parts. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a comparable plasma system with the same cutting power. Alternatively, this machine can also be equipped with a 12kW laser source. This increases the cutting power to 50mm steel, stainless steel, or aluminum. German customer service in the Rhineland region of North Rhine-Westphalia with a spare parts warehouse on 400m² of storage space. German-speaking telephone and on-site support with short response times. All of our machines are installed and maintained by us. 1.5 x 3m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1550 Z-axis [mm]: 180 Maximum speed [m/min]: 120 Acceleration: 1.5 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 6200 Width [mm]: 2500 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 3 kW, 6 kW, 12 kW Cutting capacity at 6 kW Steel - 25 mm, stainless steel - 18 mm, aluminum - 18 mm Cutting capacity at 12 kW (additional charge) Steel - 50 mm, stainless steel - 50 mm, aluminum - 50mm • Fully enclosed, ensures laser safety Dodpfx Aov Nzrbjfpskh • Compact design, saves shipping costs and reduces installation time • Better accessibility thanks to the full-length sliding side door • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to the powerful controller and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response thanks to remote service • Fully enclosed machine with OD5+ laser safety glass windows • Small footprint • Thanks to the adjustable control panel, front door, and side sliding door Higher dynamics & productivity • Thanks to the optimized machine bed and the extruded aluminum gantry, equipped with the fast, real-time Han's 901 (Rexroth) controller and powerful Rexroth motors, the HF Mini S achieves very high speed and acceleration. Component Configuration and Selection Control System: Han's 901 (Rexroth, Germany) Servo Driver: Rexroth, Germany Cutting Head: Han's, China Linear Guide: PMI, Taiwan (China) Rack: Svarog, Czech Republic Gearbox: Shimpo, Japan Servo Valve: Lanny, Germany Machine Frame: Han's, China Gantry: Han's, China Z-Axis: Han's, China Shuttle Table: Han's, China

Condition: good (used), Haas Laser HL 1203D Optical configuration: 22-31-21-BX Laser class 4 1500 W Dksdpfx Afexam Ryspeh 1064 nm You can find more items—new and used—in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm Dkjdpfx Aevcbf Iofpeh - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system - Automatic door-up and table-out system - Dual temperature water cooling system Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 1 week. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Dsdpfxsvcbw De Afpjkh Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 2 weeks. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 Dkjdpfx Afjvca Nrspsh is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe, we have in Europe in 3 locations a sales and service organization.

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Dkodpfx Afsvcbrhepoh Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 1 week. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels Dkjdpfxowm Nu Do Afpoh • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 18,000 h, machine/vehicle number: A0215A0232, laser power: 2,500 W, sheet thickness (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.1 mm, overall weight: 8,900 kg, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Laser power: 2,500 W Maximum sheet thickness (mild steel): 15 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (aluminum): 5 mm Axis speed: max. 60 m/min Positioning accuracy: ±0.1 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): approx. 7,400 × 3,300 × 2,300 mm Machine weight: 8,900 kg Mains connection: 400 V / 50 Hz Connected load: 65 kVA Control voltage: 24 V Required fuse protection: 3 × 100 A Dkodpfx Aeyb Rzyjfpsh Compressed air connection: 7–14 bar Nitrogen connection (N₂): 29 bar Oxygen connection (O₂): 14 bar Operating hours: approx. 18,000 h EQUIPMENT Automatic pallet changer FocusLine laser technology NitroLine laser technology Maintenance-free AC servo drives

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, The machine was last overhauled in 2024! TECHNICAL DETAILS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Dkedpeyfv Exsfx Afpjh Service and inspection history available from 2019

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Dkedpfx Afeygu Tkjpeh Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Dsdpfx Afehv U Swjpokh Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 4000*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 69,301 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: Truflow3200, laser hours: 41,349 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 140 m/min, repeat accuracy: 0.01 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: nozzle changer, Trumpf TruLaser 3030 (L20) Laser Cutting Machine Dksdpfxsxmpn Us Afpoh Year of manufacture: 2013 Working area: 3000 × 1500 × 115 mm Rated laser power: 3,200 W Control system: Siemens Sinumerik 840 D SL Maximum sheet thickness: Steel (St): up to 20 mm Stainless steel (VA): up to 12 mm Aluminum (Al): up to 8 mm Maximum traverse speed: 140 m/min Positioning accuracy: 0.01 mm Dimensions: Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Equipment: Automatic nozzle changer, voltage stabilizers included

Condition: like new (used), Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical specifications: Laser type: Fiber Laser Source power: 3 kW Working area: 3000 mm × 1500 mm Laser source: Rofin FL030 Fiber Laser Source Laser source serial number: 987 Year of laser source manufacture: 2015 Additional equipment: Djdpfx Asyhppvjfpekh Thermotec Chiller Unit – chiller unit for laser source temperature stabilization Donaldson Torit DCE DFPro-4SPK – fume extraction and filtration system Infeed/Outfeed Shuttle Table – automatic loading/unloading table Light Guards – light curtain safety system

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981 Dkedpfx Afexrpmzepjh

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules Dkedpfsyfnbljx Afpjh - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Speeds: X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Pneumatic connection: 7–10 bar

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Operating hours: approx. 31,000 h. Dkjdjyh Hq Uepfx Afpjh

Condition: good (used), Year of construction: 2005, X working area max.: 2585 mm Y working area max.: 1280 mm Control: Siemens Sinumerik 840 D Dkjdpjyh N Ipsfx Afpjh Laser power: 2700 watts Laser beam on: 6,271 hours Operating hours: 34,581 hours Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting head - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Automatic tool changer with 21 stations - 2 hold-down clamps - Tool rotation for all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast hydraulic shutdown - Automatic shutdown - 2 automatic part chutes for parts 500 x 500 mm - Sensors for both part chutes - Punch slug extraction - Forming capability - Programmable punching tool lubrication with 2 containers - Programmable stripper - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ45 network connection - 3.5'' floppy disk drive - Thread forming function - Marking function - Multishear function - Multibend function - Roll technology function - Engraving tool function - Height-adjustable hold-down clamp - 1 additional hold-down clamp - Chip conveyor with container - Warping detection Automation: - SheetMaster - Rigid loading station - Unloading platform combined with SortMaster Pallet - Simultaneous loading and unloading during main time - Unloading monitoring - GripMaster - Scissor lift table - Skeleton pallet - ToolMaster - SortMaster Box

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Dkedpfxeu Nu R Ie Afpeh Cut Control *

Condition: used, Year of construction: 2010, Trumpf TruLaser 1030 – Laser Cutting Machine - B&R Automation PC 820 CNC Control - TruCoax 2500 Laser - Serviced annually by Trumpf (last service July 2025) - Year of manufacture: 2010 Technical Specifications: Working Area: - X-axis: 3078 mm - Y-axis: 1550 mm - Z-axis: 76 mm Maximum Material Thickness: - Mild steel: 16 mm - Stainless steel: 8 mm - Aluminium: 6 mm Speed: - Max. cutting speed: 40 m/min - Cutting acceleration: 2 m/s² Dkedsyghm Dopfx Afpsh - Positioning acceleration: 9 m/s² Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ± 0.1 mm/m - Average positioning scatter: ± 0.03 mm Laser: - Max. laser power: 2500 W - Wavelength: 10.6 µm - Power stability: ± 2 % - Power distribution: TEM00 Compressed Air Consumption: - Standard cutting: 333 l/min - Air cutting: 500 l/min Electrical Data: - Drive type: maintenance-free three-phase motors - Connection: 65 kVA - Protection at 400 V: 100 A Dimensions & Weight: - Dimensions (W x H x D): 7396 x 2291 x 3287 mm - Total weight: 8850 kg

Condition: good (used), functionality: fully functional, FOBA M 3000 P Fiber Laser Marking System - with CNC-controlled X, Y, and Z axes Motorized Z axis: - Z-axis travel: 590 mm - Speed: 25 mm/s (1.5 m/min) Motorized X and Y axes: - X-axis travel: 520 mm - Y-axis travel: 225 mm - Speed per axis: 100 mm/s (6 m/min) Dodoyh Iwpjpfx Afpjkh - Footprint: 1.36 m² - Working area: 0.2 m³ - Door opening (WxH): 970 x 450 mm - Max. workpiece weight: 30 kg - Max. workpiece size: 970 x 490 x 450 mm - Power consumption: depends on the integrated laser system,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,000 h, machine/vehicle number: 10026993, control type: CNC control, degree of automation: automatic, actuation type: electric, Used very clean Bystronic Bystar 3015 6 kW for sale Bystronic ByStar 3015 6 kW BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING MACHINE TYPE: LASER CUTTING MACHINE (CO2) Fully serviced CNC CONTROL BRAND: BYSTRONIC Technical information BRAND: BYSTRONIC LASER POWER: 6 KW LASER TYPE: CO2 LASER MODEL: BYLASER 6000 Dkedeygwz Depfx Afpjh MOVEMENT X-AXIS TRAVEL: 3000 MM Y-AXIS TRAVEL: 1500 MM Machine hours: Operating hours: 38,000 Turbo hours: 33,000 ADDITIONAL EQUIPMENT - RPP controlled pulse piercing - CUT-CONTROL - 2 CUTTING HEADS (5″, 7.5″) - Byloader - Donaldson Torit DF4: High-performance fume and dust extraction system with nanofiber filters.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,790 h, controller model: B&R APC 910, laser power: 3,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Laser power: 3,000 W Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 16 mm Sheet thickness (aluminium): 12 mm Travel speed: 100/140 m/min Accuracy: 0.1 mm MACHINE DETAILS Control: B&R APC 910 Connected load: 33 kVA Dimensions & Weight Space requirement: approx. 7,800 x 5,900 x 2,300 mm Machine weight: approx. 11,400 kg Controller power-on hours: 2,472 h Operating hours: 15,907 h Laser power-on hours: 7,790 h EQUIPMENT Integrated solid-state laser TruDisk 3001 with 1 fiber output Fully automatic pallet changer (with light barrier) Enclosed machine frame with integrated components Motion unit for high-precision processing Drives with maintenance-free three-phase servo motors Sheet support accessible from both sides Enclosed beam guidance via laser light cable (fiber optic cable) Fully integrated chiller for laser and machine Integrated control cabinet Travelling fume extraction system Slag drawers 19" touch colour screen Dkjdpeyhmxujfx Afpoh TruDisk power supply via machine Workspace lighting Positioning laser diode PierceLine FocusLine NitroLine Transport and installation device Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) TRUMPF Laser Fiber optic cable as per standard layout (laser placed directly next to machine) Excitation via pump diodes Laser power control Laser logbook function Universal cutting unit Pierce head strategy Protective glass against lens contamination ControlLine: Height control and detection of sheet outer edge Simple drawing module Easy workshop programming Quick reproduction Integrated TRUMPF technology data Auto shut-off Programmable cutting gas/pressure selection ContourLine FastLine Microweld Tele-service via Internet Microjoint - handling at the control panel Adjustable dynamics Data transfer RJ45 network connection and USB interface CE mark Compact extraction unit Machine enclosure with certified viewing windows Motorised front door and rear access Enclosed machine roof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 5,000 W Current laser power: 5,335 W (as of 27/04/2023) MACHINE DETAILS Control system: SINUMERIK 840 D SL Power supply: TruDisk via the machine Solid-state laser: TruDisk 3001 with 1 fiber optic output Dkedpoyhmvtofx Afpeh Operating hours Operating hours: 67,508 h Laser on-time: 41,657 h EQUIPMENT Excitation via pump diodes Laser power control Automatic shut-off Torque drive in combination with linear direct drives Enclosed beam guide with fiber optic cable (LLK) Machine chiller unit (water-air) Integrated control cabinet lighting Automatic longitudinal pallet changer 17" touch color display Wide longitudinal conveyor belt Workspace lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass against lens contamination Protective glass monitoring ControlLine: height control and sheet edge detection Simple workshop programming Advanced workshop programming Fast re-run Integrated technology data Programmable cutting gas/pressure selection FastLine FlyLine AdjustLine Teleservice via internet Data transmission via USB interface RJ-45 network connection Safety with CE marking Light barriers Multi-chamber extraction system Compact extraction unit Machine enclosure with certified viewing window Right-hand door and electric roll-up roof

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Dksdjwkd Efspfx Afpsh Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Dkodpfjxfin Sox Afpoh Laser on: 55,176 h