Section Shear - Combined

MUBEA BF 30-12

Condition: used, Year of construction: 1976, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 800 mm Isdpfx Aova Ertedwjtb turning length: plan =140 / quer =120 mm center height over bed: 170 mm spindle bore of work spindle: Ø 40 mm range of revolution per miute: 25 - 2000 / 20 step U/min feeds:: längs: 0,028 - 1,0 / quer: 0,012 - 0,44 mm tailstock quill taper MT: MK3 tailstock quill adjustment:: 120 mm total power requirement: 3,0 kW weight of the machine ca.: 1,1 t dimension machine xH: 2,0 x 0,8 x 1,4 m Threading possible: Metric, Withwort and modular thread Equipment: - 2-way measuring device VISUCONT - 3-jaw chuck Ø 205mm with internal clamping jaws - quick-change steel holder Multifix - foot brake - cooling water pump (exclusive supply) *

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Iodpfxerz Tuts Adwotb Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg Isdjtzf N Rjpfx Adwotb

Year of construction: 1983, condition: good (used), 1 Bracket milling machine make: RECKERMANN, type: KOMBI 900, year 1983 ser. no. 6367P, table size 1.000 x 310 mm, travel X/Y/Z 720 x 220 x 450 mm, Ijdpfoh E Du Djx Adwotb tool holders SK 50, HD machine vice, spindle speeds: 3...2800 rpm

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Itjdpfx Aowm D Ilodwob Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Itsdowgkq Tspfx Adwsb Throat: 250 mm Machine weight: approx. 1,800 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm Itjdpspuy H Dofx Adwsb - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), functionality: fully functional, Year of construction: 1998, working width: 2,000 mm, pressing force: 35 t, pressure 35to max. bending length 2000mm arrester behind Isdpfewagykox Adwstb drive capacity 4,5 kW weight 3000kg

Condition: used, Year of construction: 1973, turning diameter over bed 490 mm turning diameter over slide rest 280 mm turning length 2000 mm centre height 245 mm Iodpfx Ajtqqvvsdwjtb centre distance 2000 mm spindle bore 62 mm total power requirement 7,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant

Year of construction: 1983, condition: used, Hermle UWF 700 Brief description: Universal tool milling machine Universal tool milling machine Hermle Type UWF 700 year of manufacture 1982 table 700 x 285 mm travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm quill stroke 63 mm drive power 2,2 kw Iodpfx Adokhc A Dswetb Digital display counterholder weight 1500 kg