Welding fume extraction

NEDERMANN E-PAK 500

Condition: excellent (used), Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A) Djdpfx Adjtvf Ensdela

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. Dlodpfxswbvhae Addsa - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Djdpfxjtu Hy Ne Addsla Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: Dsdpfx Adotzmifsdjla -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: new, Year of construction: 2021, functionality: fully functional, surgical mask line, high speed surgical mask line, Food Pad, wound pad, mask line The 3-ply surgical mask line , wound pad, mask production system offered here combines efficiency and safety features with a first-class meat pad, food pad, fruit pad . The integrated extra module "Single Pack" enables the food pad production machine to pack each mask individually wrapped at full speed of up to 800 pads / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. Surgical mask line can be used as following outer layer Spunbond nonwoven middle layer is meltblown layer bottom layer is spunbond nonwoven The food pad is made up of 3 layers of non-woven material: - An outer layer of spunbond/film - A meltblown filtration layer/sap , saf , fluff, pulp absorbent layer - An inner layer of spunbond/film surgical mask line food pad meat pad fruit pad These product features are realized thanks to the use of precise welding rollers, a modern and intuitive HMI with touchscreen function for simple and clear operation, as well as web guiding systems implemented. Intelligent sensors ensure that the material levels are precisely determined. If a low material level is detected, the material is welded to one another using the autosplice function without stopping the system. Plant details: - Solid, high-quality system structure with over 25 tonnes for maximum stability - Pneumatic material winding shafts for flexible and easy exchange of the rolls - Pneumatic material winding shafts in double design for quick set-up times and convenient handling - Adjustable web tension through pneumatic modules - Autosplice function for convenient material welding at the end of the roll - Individually controlled winding shafts for maximum precision E3b2qnt - Servo driven unwinder, PLC control - Sensor technology for material presence control - Automated alarm & stop function in the event of material tear - Web guiding for maximum precision of the raw material - Large and intuitive touchscreen - The touch screen can display the diameter of the rolls, the material ratio, the servo load and alarm codes - The machine speed can be conveniently set on the touchscreen - Error messages can be tracked in the alarm and error history. These include: Raw material, joining, splicing and fan defects - The production quantities and other details can be viewed on the HMI aswell Performance data: - Power consumption: on request - Power connection: 380 V / 50 Hz - Number of cycles: up to 800 masks / min. - depending on the material Dlodpeh Rwk Tjfx Addsa - Carton: depending on the packaging format - Compressed air: 6-8 bar with sufficient volume / reserve - Dimensions: 15 m x 4 m x 3 m (LxWxH) - different depending on the equipment - Weight: 25 tonnes - varies depending on the equipment System modules: - Unwinding units for spunbond, meltblown andfilm with automatic splicing unit side embossing unit - Triple folding food pad. - food pad n the side embossing unit - End cutting unit (high speed steel) - Product exit conveyor - Single pack packaging module - Security doors with sliding construction

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive Dljdpfx Adotiy Ntodsa 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm Dedpfxsg Iirnj Addola strip thickness: 1 - 5 mm

Condition: good (used), Traypacker / wrap arround packer Trays and wrap-around boxes minimum packaging size L x W x H = 190 x 140 x 80 mm maximum packaging size L x W x H = 460 x 350 x 250 mm 4 lane machine Hotmelt machine was rebuild in 2018 siemens s7 plc controlled easy format change as-is or Dsdpjfxypiofx Addjla adjusted to customer needs

Year of construction: 2025, condition: new, consisting of: - Trailer Dsdscl Tvgjpfx Addjla - Washing Elevator KWEM 2000 - Apple Belt Press KEB 500 - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 750 - Bag in Box Filler KBF 2000 for mobile trailer - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . .

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, functionality: fully functional, - Top functional packaging machine (thermoforming machine) of the PowerPak series. - Perfect for packaging pasta products. - Viewing under production conditions (packaging of gnocchi) possible at any time. - With matching feed belt and ExaktaPack brand scale (included). Technical details GEA PowerPak: - Film width: 350 mm lower web, 334 upper web - Approx. 12 cycles / minute - Forming tools: 1.1, 2.1, 2.2 - Rigid film, PP, PET, etc. - Bottom web preheating - Longitudinal and cross cutting with silent edge strip winding - Machine length approx. 9m - Draw-off: 60 mm - Busch vacuum pump (included) - Eject station and distribution pneumatic Dlsdpfx Adoua Hchjdja - Flow cooler for cooling form and seal stations. Additional information on request and/or inspection gladly possible.