Glazing bead sww

OMGA TRF 527 NC CE

Condition: good (used), Year of construction: 2009, Weinig Conturex window production line C 114 Year 2009 Working width 25-260 mm Ndjdpfx Afeuzu Tyoled Working height 25-110 mm Table length PowerGrip 4 x 2280 mm Workpiece length 200-6000 mm

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm Ndsdpsvu Hghsfx Afljd > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: new, Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. weight 4770 kg Ndodpevnv Ubofx Aflod Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Year of construction: 1998, condition: excellent (used), I sell the window profiling automat centre Weinig Univar 10 Nsdpfefzzhrox Afledd Year 1998. Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 4 pcs. available. Condition very good !

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Ndodpfxjg Tumcs Aflsd Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: excellent (used), Year of construction: 2018, Circular saw with +/- 46° double blade tilting with 3 controlled axis - Version READY 3 UP - CE Standard equipped with following optionals : Start buttons integrated into the sliding table Squaring frame with Compex device Squaring fence with n° 2 LCD displays for position reading Technical data: Max. saw blade diameter with mounted scorer mm 400 Njdmay Tmod Dc Ecebewl Maximum saw blade projection from table to 90°/+46°/-46° mm 136/97/60 Ndsdpfx Afjxgbzmslsd Cutting width on rip fence mm 1270 Squaring capacity mm 3200

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Nodpfx Afsxnlgcslodd Storage location: Garbsen

Condition: new, Year of construction: 2025, functionality: fully functional, Stock machine: Subject to prior sale - Glass bead saw / double mitre saw Exenso DS350 - 3,000 mm for wooden glass beads, glazing bars, profile strips, aluminium trims, etc. Swivel range from 22.5° (internal) to 135° (external) Right-hand head is movable. Saw blade holder Ø 350 mm Working length 3000 mm - Includes 1 central support. - Pneumatic clamping of the units. - Positioning control Exenso DS3 with touch panel - 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swing axes. - Manual input of cutting data - Processing of data from a cutting list (data records as specified) - Processing of measuring gauge data (wireless GMF caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor and software licenses. 1.2 723.0121 DS/ES saw blade for wood, 2 pcs. 1.3 942.5997 DS Pneumatic feed device, 1 set 1.4 942.5236 DS Combined workpiece clamp, 2 sets Njdpfx Aow Exaaoflodd 1.5 942.5241 DS350 Grooved table supports, 1 pc. 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction Ndsdpfxew I Uzke Afljd - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: ready for operation (used), Technical characteristics Distance between blades: 225 to 2800 mm Minimum distance between blades at 45°: 385 mm Cutting capacity at 90°: 140 mm Cutting capacity at 45°: 102 mm Max. cutting height: 90 mm Blade diameter: 300 mm Suction: 2 x 80 mm Pneumatic clamping system Simultaneous blade lowering Power and Motors Voltage: 380 V Pluging: Three-phased Nsdpfx Asuciq Tofljdd Power: 5 Kw Motor: 2 x 3 CV Overall dimensions Lenght: 4000 mm Width: 650 mm Height: 1400 mm Weight: 800 Kg