Panel press

ORMA ORMA NPC DIGIT 3000/5

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min Ihodpfshcwrkox Adwst blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Ihedpon Ut Iljfx Adwjt Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm Ihedpfx Adegv I Unswet drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Iodexvz T Iopfx Adwoht Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Ihsdpeig Hu Njfx Adwjt Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Year of construction: 1994, condition: excellent (used), Longitudinal Flow Dryer in Cabinet Design Internal chamber length approx. 4300 mm Internal chamber width approx. 750 mm Internal chamber height approx. 630 mm Chamber volume 2.3 m³ Side loading – cabinet version with loading trolley Vertical lift door, spring-assisted Manual / fully automatic control Electronic control MP 902 Longitudinal ventilation Fans: 1 unit Fan motor power 0.55 kW, 400 V, 50 Hz Heating electric 4.2 kW Required space approx. 5500 mm x 1100 mm x 1300 mm Weight Iodpfx Adjxug Dcoweht INCLUDES: Aluminium stacking battens Wood moisture measurement probes Various spare parts Operating manual, electrical schematic, etc. Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location – free loading! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), The CFS Krämer+Grebe 325-liter vacuum bowl cutter is a high-performance machine designed for efficient meat processing. Machine equipped with a cooking option. Main features: Bowl Capacity: 325 liters, suitable for medium to large-scale production. Motor Power: 138 kW, providing robust performance for demanding processing tasks. Cutter Blade Speed: Infinitely variable from 60 to 4,100 rpm, allowing precise control over the cutting process. Iedou E Tlpjpfx Adwsht Mixing Speed: Stepless, with forward and reverse options, enabling thorough and adaptable mixing for diverse products. Bowl Speed: Stepless control for optimized processing efficiency and flexibility. Cutter Bowl Design: Equipped with a raised cutter rim to enhance safety and minimize spillage during high-speed operation. Vacuum Functionality: Reduces air incorporation, improving product texture and extending shelf life. Noise Protection: Includes an electro-hydraulic V2A noise protection cover for quieter operation. Loading and Ejector: Features an electro-hydraulic loading system and an electro-hydraulic product ejector, streamlining loading and discharge. Knife System: Incorporates the GEA Top-Cut knife system with a quick-locking nut (Quick-Lock-Nut) for efficient knife head fastening. Cooking Device: Equipped with a cooking device, allowing for integrated cooking processes within the cutter. Construction: Made from durable stainless steel for longevity and hygiene. Control Panel: Equipped with an analog control panel for straightforward operation and precise control over cutting, mixing, and bowl speeds. Incl. Extra main motor (used, very good working condition), extra control panel and extra electric box with Lenze inverter (complete)

Year of construction: 2003, condition: good (used), Strokes 560x 410 x 510 mm, table 900 x 410, magazine 30 tools, spindle 12.000 rpm, chip conveyor Iodpfxjiwkhkj Adwsht

Condition: new, Working width 3500 mm Ihsdpfx Aed Rzc Rjdwot Working height 2300 mm Number of cylinders 4 St.

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS Isdpfxjchhfue Adweht motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.