Overhauled ORT RP18 B PLC

ORT RP18 B PLC

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Iedjt Rmdzopfx Ahnjtl Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Ijdpfx Ahjh In Thonotl Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] Ijdpeuhb Uhsfx Ahnjtl EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump - 2 boring wheel 80, diameter : 260 [mm]

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, Equipment: chip conveyor, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions, as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in the medical technology, mechanical engineering, and precision engineering industries. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control. This enables both dialog-oriented and ISO programming and offers modern functions for efficient and productive manufacturing. Key technical data: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis has a swivel range of 225°, enabling complex 5-axis machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. The main spindle reaches speeds of up to 6,000 rpm with a power of approximately 11 kW, which enables dynamic and precise turning operations. The integrated milling spindle operates with speeds of up to 12,000 rpm with a power of approximately 5.5 kW and is ideally suited for milling, drilling, and threading operations. The machine features a tool changer (available) with a maximum tool length of 210 mm and a KM tool holder, which ensures high rigidity and fast tool changes. Equipment: The equipment includes: • Chip conveyor • Tool measurement system "Tool Eye" With a machine weight of approximately 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. Itjdjzpyvhspfx Ahnol You are in the best hands with us – professional, reliable, and with a passion for machines! Necoyir I Rs Eanhd Held PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Itjdpfsuz If Nex Ahnel Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Ijdpfsir Aihsx Ahnotl Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: good (used), Centerless grinding machine HERMINGHAUSEN SR40 III CNC Iodegq Ddfepfx Ahnjtl

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Itodpfx Ahsbrantensl Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Ijdpfx Ahew D Aq Tenotl Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: used, ORT RP18B overhauled Isdpjuua H Rjfx Ahnetl