Rolls bending machine - 3 Rolls

OSTAS SM 1070 x 76

Condition: new, – Capacity: 1070 x 2 mm – Conical rollers – Removable top roller – Foot control – Emergency stop – Documentation – 400V Chsdpfx Ashc Uvmjb Uja

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: hardened rollers Codpfohzq Dqox Ab Usha motorized rear roller adjustment digital display Sheet metal width 1250 mm Sheet metal thickness 3.0 mm max. Sheet metal thickness 2.5 mm for pre-bending Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1950 x 900 x 1130 mm Motor: 1.1 kW Equipment: Top and bottom rollers, electrically driven Top roller can be swung out Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Codjd Anz Ropfx Ab Uoha Very robust

Condition: ready for operation (used), functionality: fully functional, power: 21.6 kW (29.37 HP), color: gold, operation weight: 3,540 kg, Year of construction: 2004, operating hours: 5,900 h, Equipment: quick-change device, rubber tracks, Volvo EC35 Mini Excavator Year of manufacture: 2004 Approx. 5,900 hours (hour meter replaced) 21.6 kW Volvo 4-cylinder engine Chsdpfezhmc Esx Ab Uja 3,540 kg MS03 mechanical quick coupler All hoses

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. Codpjrq D Niefx Ab Uoha The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Cjdpforfx Utox Ab Ueha Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch Codpfofv H Edjx Ab Uoha - 7 pcs. Roll sets

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control Chodpfxocdrmmj Ab Usa

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm Codpfxov Tpxqs Ab Usha -Weight: 3900 kg

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Chsdpfsiknv Esx Ab Uea