Multi-spindle drill head

Paatz 280 x 280 mm

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. Gijdswf Dpgspfx Af Ast To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Gsdpfof Aad Nsx Af Asit Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Giodpfx Afofy T Aro Ajt Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head Gisdjb A I Ulopfx Af Ajt -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece -Weight: 2 kg/piece

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each 1 horizontal 21 spindles Gsdpfx Ajih H Epsf Ajit 2 vertical 21 spindles pneumatic clamps

Year of construction: 1994, condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm wall strength: 0,6 / 0,7 / 1,0 mm tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V Gedpfxju Icv Ao Af Asit total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm workpiece length 150 - 1000mm div. Zubehör/Werkzeuge Ø 120 und Ø 130 und weiteres, wie im Foto *

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm Gijdpfsw I Unwex Af Ajt 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 9 drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 310/60/H135 mm Giodpfxeb A R R Tj Af Aet -Weight: 8 kg

Year of construction: 2021, condition: ready for operation (used), overall weight: 4,920 kg, total width: 1,460 mm, total height: 1,520 mm, product length (max.): 2,925 mm, Roll bending machine manufactured in 2021. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details. • working width: 1,550 mm • Bending / pre-bending capacity: 20.0 / 16.0 mm • Top roll diameter: 270 mm • Bottom roll diameter: 260 mm • Side roll diameter: 220 mm • Drive power (central hydraulics): 7.5 kW (15 A) Godpfxoy Ifrzs Af Aoit • Control: CNC TouchCommand EVO • Electrical supply: 400 V, 50 Hz, 3Ph + PE Additional equipment • Crowning of rolls • Inductive hardened rolls • Calibration device • Cone bending device • Hydraulic brake for top roll • Additional roll (1,550 x 230 mm)

Condition: good (used), Welding device, welding robot Gisdpob A Hrlefx Af Ast -Welding device: for plates that are to be welded at an angle -with: travel adjustment (limit switch) -pneumatic: material clamping (angle) -Welding speed: adjustable -without: inert gas welding device