Cutting Line Autotrimm PACE

Polar 137XT-AT

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Bsdpfxoxd U Sao Aqlodc Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) Bdjdowh Tq Sepfx Aqloc • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m Bodpfx Aqsvmfxgolodc ST40, Horizon ASF 30, SPF 30 Trimmer HTC 30 Counter reading only 14.2 million

Condition: used, Year of construction: 1981, machine/vehicle number: 5171754, Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Bdjdpeh Ax T Tsfx Aqloc Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1528 stitching unit Bedpfx Asd Eg Tujqljdc • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: good (used), Year of construction: 2014, feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 180 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 180 mm, Selling FIVE working Datron M10 Pro due to relocation, with a 6th M10 Pro for SPARES/REPAIR. 1 x Datron M10 Pro 2018 3kw 40k HSKE25, 2 x 12 tools fixe axis capable linear scale option 1 x Datron 8 Cube 2015 3kw 40k HSKE25, 2 x 12 tools fixe axis capable 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 Spares/Repair ONLY , no spindle, no XYZ servos, no computer. Bsdpfjywu Tyex Aqlsdc Available for immediate sale. The DATRON M10 Pro is a high-speed CNC milling machine designed for precision and versatility in industrial applications, particularly for the aerospace, medical technology, and electronics industries. Built with a solid granite table for vibration damping and thermal stability, it is engineered for high-speed cutting (HSC) of non-ferrous metals like aluminium, composites, and plastics with a 3.0 kW HF Spindle HSK-E 25.

Condition: excellent (used), Year of construction: 2022, operating hours: 3,752 h, functionality: fully functional, Magnus 800 Bdsdpfxjyarfwj Aqljc Plates 91251 Bacher die-cutter TFT PC

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions - Electrical circuit diagrams - Standard tools - Standard accessories Bjdpfxoqqkvqs Aqlodc

Condition: used, Year of construction: 2018, only approx.16K plates done Format 830 x 660 mm Bdedpfx Aqjyt I Unjlsc Apogee Workflow RIP Inlinepunch Azura C95 Clean out unit Stacker ST 95EX Available: at short term

Condition: excellent (used), functionality: fully functional, For sale: Heidelberg SGB Cylinder 56 × 77 cm with hot foil stamping attachment. Die-cutting is also possible. The machine is in very good technical and visual condition – fully functional, ready for operation, and requires no additional investment. Price: 17,500 EUR / 74,000 PLN – negotiable. The set includes a honeycomb plate for hot stamping and a frame for mounting the cutting die. Viewing on site is possible. Bjdpjycfnkefx Aqlsdc