Face plate

RÖHM 500 mm DM

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Kwjdott Nd Repfx Adwjt Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Kwsdpjp T Twuefx Adwjt Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Kwodpfx Aoig Hu Njdwet Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system Kwodpfx Adovrxd Hewst The machine can be inspected under power.

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Y300mm Z300mm Ksdpfxerq D Uke Adwowt tool clamping hydraulic inverter on spindle SK40 machine in very good condition

Condition: new, The VHF 3.2 is a robust and versatile universal milling machine that fits seamlessly into the category of Conventional Vertical Milling Machines and the product group of Universal Milling Machines. This high-performance model enhances the proven capabilities of the VHF series, featuring a combination of a horizontal spindle and a swiveling vertical milling head, which expands its range of applications. Built with a rigid machine bed from high-strength HT-200 cast iron and equipped with precision-made headstock gears, the VHF 3.2 offers durability and reliability. Its extensive setup area of 1,370x320 mm and the ability to handle angular bores make it suitable for diverse tasks in both repair workshops and educational settings. The machine’s powerful servo-motor provides infinitely variable feed across all three axes, facilitating efficient operations. One can enjoy minimal downtime thanks to rapid positioning of the work table, alongside a comfortable control panel swiveling to enhance usability. Request a quote today to explore how the VHF 3.2 can elevate your machining capabilities in the realm of Conventional Vertical Milling Machines and Universal Milling Machines. Kwsdpjn E Ni Hjfx Adwet

Condition: excellent (used), Year of construction: 2000, operating hours: 1,600 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 6,300 rpm, overall weight: 5,500 kg, spindle speed (max.): 6,300 rpm, Universal Machining Center Deckel Maho DMU 80T Year of manufacture: 2000 Control: Heidenhain Operating hours: approx. 1,600 h Technical specifications: Spindle speed: 0 - 6,300 rpm Spindle torque: Tool holder: SK 40 Magazine capacity: 24 positions Kwodpfswq Dmcsx Adwjt X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Equipment: - Coolant system (KSS) - 30 SK 40 tool holders - 1x machine vice The machine is in very good condition and has seen very little use.

Condition: used, COVER MAHO TYPE DMU 50 M VERTICAL GOOD CONDITION Kwoderh Epyspfx Adwet

Condition: ready for operation (used), Year of construction: 2000, spindle bore: 60 mm, turning diameter: 590 mm, turning length: 1,100 mm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 2,800 kg, visual accuracy spindle bore 60 mm, variable spindle speeds up to 2500 rpm Ksdsw Ed Aajpfx Adwowt Multifix turret type C Ladner 3-jaw chuck capacity 1100x590 mm

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m Ksdeu Nda Eepfx Adwswt The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain *