Three-jaw chuck

RÖHM

Condition: excellent (used), Vise Manufacturer: Röhm Type: 721 UH 7 Jaw width: 300 mm Opening width: 405 mm Nlodpfeiqgbmox Airsh Jaw height: 78 mm Overall height: 165 mm Overall length: 790 mm

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm turning length 1000 mm Nsdpfxoyiu T Ao Airelh spindle bore 56 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,4 x 0,8 x 1,6 m

Condition: excellent (used), Year of construction: 2001, Steady rest in good condition, today's new price 55.000,- EUR span range max.: 400 mm span range min.: 50mm steady rest width: 170 mm Nledpfx Aie Ad Iy Usroh steady rest height: 730 mm

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 55 kg Nedpfxeu Nlp Ij Airslh span width: 310 mm Hydraulic vice Jaw depth 49mm i.D. *

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm Nledpfx Aispk A A Hsrjh single adjustable jaws bolt circle 120 mm

Condition: used, Technical details: jaw width: 110 mm weight of the machine approx.: 75 kg Nedpou Nungsfx Airolh Vise RÖHM with hydraulic clamping Clamping stroke max. 60mm, clamping width max. 150mm;jaw width 110mm; hydraulic connection Ø 13,5mm each 2x The jaws are equipped with prismatic clamping and with cylindrical shaped piece Hydraulic Enerpac: Oil tank 300x200x130mm; 5 liters capacity; 380Volt; flow rate 1,11 l/min; connection Ø 17,5mm Equipment: -There are connection cables on both hydraulic units. -on one vice a 2m hose connection for hydraulics is integrated two pieces available no. 1 and no. 2 price per piece *

Condition: used, Technical details: diameter: 400 mm width: 160 mm Nodeu Nlh Repfx Airolh weight of the machine approx.: 159 kg revolution per minute: 3000 U/min Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken *

Condition: used, Year of construction: 1951, Technical details: Nlsdeu Ix Hdspfx Airjh turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, Technical details: diameter: 200 mm passage: 50 mm Nlodpju Nlmaefx Airjh width: 65 mm weight of the machine approx.: 46 kg stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. Formbacken *

Condition: used, Technical details: Nljdpfxsu Nlihj Aireh diameter: 300 mm width: 165 mm weight of the machine approx.: 88 kg EMAG Nr. 20012826 X0501 Merkmale: automatisches spannen Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar *

Condition: ready for operation (used), machine/vehicle number: 1124, table mounting size: 300 x 1300 mm table movement x: 950 mm table movement y: 220 mm table movement z: 400 mm spindle taper horizontal: MK 4 spindle turning speed range: 25 - 1250 rpm carriages longitudinal and cross: 7,5 - 635 mm/min carriages vertical: 3 - 250 mm/min electrical connection: 380 V, 4 kW space needed: 1670 x 1500 x 1580 mm Nledpfxsd H Ilre Airjh weight: 2600 kg

Condition: used, Technical details: diameter: 260 mm width: 125 mm weight of the machine approx.: 50 kg revolution per minute: 4700 U/min Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm Nedpfx Aeu Nliujirjlh *

Condition: used, Technical details: diameter: 200 mm passage: 50 mm width: 65 mm weight of the machine approx.: 45 kg stationary vice SSH 200 Power chuck, hydraulic Features: Chuck flange Ø 280 x 17mm with clamping groove 4x / 18x30mm Njdpfsu Nln Dex Airolh base flange Ø 290x30mm flange mounting Ø 140x10mm 20 set of different jaws *

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Nsdpfx Aov Amryeirjlh Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: good (used), Powered tools, VDI 50 standard RÖHM 14.9934.0550-00, No. 5601 RÖHM 14.9934.0551-00, No. 5740 and various other models available Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Nsdpfez Ea Nksx Airolh