Screw tap

REMS A50

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Crjdpfx Aaex Dm Dnj Nsb

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Codpjum Ufljfx Aa Norb Chemical pre-treatment by spraying Dryer Powder coating system Powder curing oven Conveying technology (cycle process) Electrical control system

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling Crodpfx Ajuz If Nsa Nsb - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Thickness 45 mm Maximum pressure 70 tons Crodpfx Aaew Ryxmj Neb Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - max. material thickness at 40 kg/mm² strength approx. 3 mm - shaft reception 45 mm - manual hydraulic feed of the top roller - E. foot switch - drive 400 V / 1,1 kW - space requirement approx. W 550 x H 1200 x D 1200 mm - weight approx. 180 kg Credpjhrm Iusfx Aa Nob

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Crodew Hx Rzspfx Aa Njb Control Esa S630 control Including Wila Sealing stamp

Condition: used, Year of construction: 1989, saw blade diameter 320 mm Crjdpfxew Dvivs Aa Nob cutting diameter 140 mm total power requirement 3 kW weight of the machine ca. 0,5 t

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) Cedpexvbvvefx Aa Njrb - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Crodjt A Ar Sepfx Aa Neb Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, TECHNICAL DETAILS screen Ø : 300 [mm] Crjdpfxeuhb Nls Aa Nob EQUIPMENT - 3 objectives (10x, 20x, 50x) - 2 axis display