Tools for tenoning machine

RESCO TENONE

Condition: used, Tenoning spindle 1 St. Hedpfx Aovu Hfqsg Noi Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Hodpfx Ajgmn H Aog Noi

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Hsdodnxydopfx Ag Nsi Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: new, Holzkraft minimax t 45c table router (5502044) Low-priced, with rigid milling spindle and cast iron work table. - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3500 to 10000 min¯¹ - Milling spindle with right-left rotation - Large dimensioned milling unit made of grey cast iron, directly fixed to the table - With suction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5,0 kW - Standard arc milling protection hood - Quality Made in Italy Equipment details Cast iron milling unit - Directly mounted on the milling table - Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life - 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors - Equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Hsdpskyt Ulofx Ag Nsi - Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. - The integrated suction connection ensures a clear view Milling table opening - A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - versatile integratable stop for bridging the tool gap - enables safe working even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimum protection on every router table, individually adjustable to the task at hand - Universal basic elements for mounting AIGNER safety and working devices - Quickly adjustable due to simultaneous clamping of all individually adjustable rods - Made of high quality aluminum - Can be used universally on all HOLZKRAFT table routers - 500 mm: Item no.: 5851000 - 650 mm: Item no.: 5851650 TECHNICAL DATA Dimensions and weights Weight (net) approx.: 240kg Suction connection Suction port diameter: 2 x 120mm Work table Working table length:1000mm working table width: 575mm table height: 900mm Set up information Required space length: 1945mm Required space width/depth: 920mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Working area width/depth: 1600mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage: 400V Mains frequency: 50Hz Power drive motor: 5,0kW Milling spindle useful length of the spindle: 100mm spindle protrusion max. over table: 130mm Spindeldrehzahl(en): 3500/7000/10000min¯¹ spindle arbor diameter: 30mm Milling tool diameter max. Tool diameter max. lowerable: 180mm Tool diameter max. profile milling: 210mm SCOPE OF DELIVERY - arch milling protection cover - aluminum stop jaws Holzkraft dealer - accessories available on request!

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment Hedsrigxyjpfx Ag Nsi WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit Hsdpfjd Inktsx Ag Nei - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation motor brake socket for feed unit Hjdpfx Ageiinm Ho Nsi Protective covers for hand milling spindle Ø 30 mm Aigner stop suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: new, The KNWP 15 M is a reliable manual hydraulic workshop press designed for versatile applications within the Workshop Presses category and specifically under Manual Workshop Presses group. Engineered in Europe, this robust machine is ideal for general assembly, straightening tasks, and workpiece testing, ensuring professional usability in mechanical workshops, garages, and locksmiths. The KNWP 15 M supports a pressure force of 15 tons and features a total piston stroke of 160 mm, enabling efficient removal and installation of press-fit bearings, as well as straightening beams and shafts. Equipped with both hand and foot control, this press includes a rigid machine frame and an adjustable-height support table, making it easy to handle. You will appreciate the versatility of its multi-function die for straightening various materials. For your needs in power and precision, you can easily order online or request a quote. Experience the quality and utility that the KNWP 15 M offers today in the Workshop Presses category and Manual Workshop Press group. Hodpfx Agencdu Ne Noi

Condition: good (used), Code: 0272 Brand: STETON Model: TF 5 Working centre for door and window frames Technical data: Cut-off saw : Blade diameter mm 400 F30 Blade speed 3000 rpm Pneumatic blade horizontal movement Motor Hp 3 Tenoning shaft: Length 490 mm Motor Hp 10 Speed 3000 rpm Spindle diameter 50 mm Tool diameter 350 mm Spindle vertical movement 450 mm Tenoning carriage: Speed 5/22 m/min Dimensions 350 x 685 mm Workpiece min/max length 320/2600 mm Workpiece min/max width 20/200 mm Workpiece min/max thickness 20/120 mm Profiling side: 1st profiling jumping shaft (chipbreaker) Spindle length 325 mm Spindle diameter 50 mm Motor 5,5 Hp N° 4 positions Max tool diameter 220 mm Main profiling shaft: Length 490 mm Motor 10 Hp Speed 6000 rpm Spindle vertical movement 450 mm Max tool diameter 220 mm Glazing bead unit: Blade diameter 180 mm Spindle diameter 30 mm Speed 6000 rpm Motor 3 Hp Additional trolley Hardware grooving spindle Hedpfx Aox Itqfsg Nji Motor Hp 3 Spindle diameter mm 40 Tool diameter mm 180 Suction mouth diameter mm 120/80 Compressed air 6-7 bar Overall dimensions mm 2300 x 2800 x 1900 h Weight kg 2250

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: Hsdpfew I Uxcsx Ag Nei - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.