Pre-drawing machine

RMG 56-0776-85

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t Nsdjwu Suvspfx Alhelc - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Njdpfx Asiryyaolhelc Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg Nsdpfx Alof Dwa Ushelc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Nedpfx Alstmqi Djholc Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Nlsdpfx Aev Tctujlhoc

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, rotational speed (min.): 17 rpm, rotational speed (max.): 33 rpm, BERG+SCHMID vertical circular saw model VKS 315 Speed: 17+33 rpm - Miter left 60° + right 45° - Clamping vice with double clamping arm (4-fold fixed) for low-burr cuts and quick lateral movement - Saw table with large turntable and particularly stable vice for optimum material clamping - Robust prismatic guide of the saw head (adjustable dovetail guide) - Automatic cooling system - Machine base frame with chip drawer - Metal handle for high clamping force - Counter holder with spring assembly a. Saw blade dimensions: 315x40mm Nlodpforrvn Ajx Alhjc Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, Fette thread rolling unit T42, cross Please, contact us for getting more informations and pictures on or Nsdpfx Ajft Tk Holhelc *

Year of construction: 1964, condition: used, -WKG 429- We are offering a grinding machine from Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm Grinding wheel Ø: Shrink-fit arbor 475/254 Grinding wheel Ø: Plain arbor 457/357 Weight: 8t Grinding method: Segment grinding Segment grinding heads: 2 pcs Accessories: Dressing device Water tank with paper band filter Marposs control Nljdpfx Asg Nt Dbslhsc

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 28727, DOUBLE-STROKE HEADER NATIONAL 61MS operational Machinery operational, fully functional. Revised in 2024 (mechanical and electrical parts) Available for any test c/o HBR srl Nedot Rp A Hepfx Alhjlc Number of die: 1 Number of punches: 2 Pieces per min.: 400 Cutoff diameter: 6 mm. Cutoff length (min./max.): 10/52 mm. Kickout stroke-die (min./max.): 4.8/30 mm. Kickout stroke-punch (max.): 9.5 mm. Upset diameter: 14 mm. Quill diameter: 19 mm. Cutter insert diameter: 12 mm. Die diameter: 41 mm. Cone punch diameter: 32 mm. Finish punch diameter: 35 mm. Power of main motor: 15 KW Floor space (width): 1.340 mm. Floor space (length): 2.680 mm. Height: 1970 mm. Net weight: 4.700 kg. Gross weight: 5.400 kg.

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. Nljdpfx Aevlwqljlhec 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.