Three rolls angle roll

Roundo R6X / R62/S

Condition: new, Year of construction: 2026, The ERBA EVP-RA 350 vibratory finishing machine features a rising, sloped process bowl floor with integrated separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the built-in drop step. Discharge and separation are carried out via the integrated flap (manual or pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines via its side discharge port. The system can be equipped with a fully automatic PLC control system (optional). Pedpsn Ut Urefx Aa Degg ERBA vibratory finishing systems are distinguished by their durability and long service life, based in part on the hot-cast polyurethane lining of the process bowl. Technical data: - Gross volume: 385 liters - Channel width: 340 mm - Vibration motor power: 2.2 kW - Speed: 1,400 rpm - Inner bowl diameter: 1,200 mm All prices are net, excluding the currently applicable statutory VAT and freight costs. Some images may show the machine with accessories that are available as options and subject to additional charges. If you are interested, please contact us. We would be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, or messaging portal). You will first receive a non-binding offer from us, which will also provide information about our general terms and conditions, legal notice, and your right of withdrawal before any purchase or contract is concluded.

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Pgodpfod R Sipjx Aa Deg Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: used, functionality: fully functional, power: 27 kW (36.71 HP), total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2013, operating hours: 577 h, input frequency: 50 Hz, shaft diameter: 105 mm, feed length X-axis: 265 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, The PBT25 with automatic radius measurement—the absolute all-rounder in our product range. This powerful and precise bending machine impresses with maximum flexibility and ergonomics. The infinitely adjustable front roller spacing from 200 mm allows for the smallest radii with perfect transitions. Thanks to the PC300 software, re-bending becomes effortless. Three powerful, low-noise electric motors drive the rollers at up to 22 rpm, ensuring the highest precision. Standard roller supports on all three shafts provide optimal stability. For more information, visit the official PBT AG website. Pgjdpfxjwm N Epe Aa Dsg

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 Pgjdpjwglfxjfx Aa Djg 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Year of construction: 2024, condition: new, arm length 5 m Pgedpfovzhhtsx Aa Djg total column height 5,5 m weight max. in kg 80 kg travel of hook 4,3 m *NEW*Never used*OVP* Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v

Condition: used, Tool presetter EZSET EZ400 Pgodpfsuhb Stjx Aa Dsg

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a flat working container bottom with integrated separation, designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out through the integrated flap, which can be operated either manually or pneumatically. Upon request, reinforced suspension and a more powerful motor can be fitted to handle higher loads. The motor speed can be infinitely adjusted using a frequency converter (optional). With its side discharge system, the EVP-A 550 can be linked with other machines for integrated workflows. The system can also be equipped with a fully automated PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also attributable to the hot-cast polyurethane lining of the working container. Pgodpjn Ut Ugefx Aa Dsg Technical specifications: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor power: 4.0 kW - Speed: 1,400 rpm - Container inside diameter: 1,400 mm All prices are net plus the currently valid statutory VAT and shipping costs. The images may show the machine including optional accessories that are available at additional cost. If you are interested, please feel free to contact us. We are happy to offer professional, non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will make you a non-binding offer, which will also include information about our general terms and conditions, company details, and your right of withdrawal, before any purchase or contract is concluded.

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Pgedpsh Rdwxofx Aa Deg Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm Pgodpfehzbipjx Aa Djg DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. Pgedpfx Aovr Eh Esa Djg The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel