Glazing and control press

RUCHSER RU-SW3-90°

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - Hedpfx Agou R Sx Eowjfd manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Hsdpfxet R T Hce Agwjfd Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Hedpfx Ajwcyd Ijgwofd Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop Hfsdpfjxabztox Agwod - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: used, Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Hfjdowwl Nlspfx Agwed Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Hedonl Nqqspfx Agwjfd Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Year of construction: 1998, condition: excellent (used), I sell the window production set: Hfjdpfxefzzhys Agwed 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Hfodpfoxtbtpjx Agwjd Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: used, cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Hsdpfx Aowgwlksgwjfd Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.321,00 euros net Brackets: packages Hodpfovnh T Nex Agwefd 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)