Tool grinder

SAACKE UW1F

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 1,00,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dedpfx Apeymk E Aetjkt

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW Dodpfxoyiz R Us Aptjkt • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Condition: used, Year of construction: 2006, Solid drill diameter / mm Dodexgu R Iopfx Aptekt bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: good (used), Year of construction: 2010, functionality: fully functional, 5-axis CNC tool grinding machine, Anca RX7 - Year of manufacture: 2010 - Software: ToolRoom RN32 - Spindle speed: 10,000 rpm - Double disc changer, capacity up to 8 discs Dkedpfszh Nuwjx Aptst - PLX tool loader

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle Dedezv Eglspfx Aptekt NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: good (used), Year of construction: 1994, functionality: fully functional, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, total length: 2,700 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm Dkedpfx Apeucdgpotst MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: excellent (used), Year of construction: 2013, operating hours: 8,200 h, functionality: fully functional, Control unit: OSP-P300M-R Table dimensions: 1530 x 660 mm Djdpey T Nhdsfx Aptskt Table load: max. 1500 kg X-axis travel: 1500 mm Y-axis travel: 660 mm Z-axis travel: 660 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 12000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 11000 kgs Dimensions (L x W x H): 3200 x 2950 x 2800 mm Accessories / Equipment: - Chip conveyor MAYFRAN - Coolant through system (CTS) with high-pressure pump - Spindle chiller - Transformer - Machining NAVI - DNC-T1 data communication - One Touch IGF - Helical cutting - Graphic-iMAP - One touch API - Common Variables: 200 - TAS-C (Thermo Active Stabilizer - Construction) - RENISHAW infra workpiece presetting system without touch probe - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: used, TECHNICAL DETAILS Dkodpfsuhbu Iox Aptst - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle power : 18,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 430 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 sur le X et 36 en Y/Z [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 x 430 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2062 x 2080 [mm] - Machine height : 2780 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of spindle hours : 3351 [h] EQUIPMENT - CNC : SMART - Interface : PCMCIA / RS232 - Interactive programming : Mazatrol - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Workpiece probe

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm Dodpfeyhrnuex Aptjkt SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control SIN 840 D Siemens B - axis +/- 110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X/Y/Z 40,00 m/min spindle turning speed - stepless 20 - 8.000 U/min tool taper SK40 power capacity at 100 % load 13,50 kW power capacity at 25 % load 23,50 kW max. torque at 10% load 85,00 Nm max. torque at 25% load 150,00 Nm table surface area 2.920 x 740 mm number of T-slots 7 T-slot - distance 100 mm T-slots 1x 18H7 / 6x 18H12 integrated rotary-table 750 mm table load of rotary table max. 500 kg tool magazin: 60 tool diameter 80,00 mm wotkpiece diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg total power requirement 57 kW weight of the machine ca. 15,5 t dimensions of the machine ca. 10,50 x 6,60 x H2,70 m 5-axis simultaneous machining center with SIEMENS SINUMERIK 840D control, ShopMill user interface, chip conveyor, coolant system, exhauster, coolant through the spindle, twin table machining possible – partition wall, electron. handwheel, TS649 measuring probe, Dodpfx Apey Tpk Eetjkt Renishaw TRS2 tool breakage detection, swivel milling head B-axis, NC rotary table C-axis. Milling spindle new in 10/2019 Guides and ball screws new in 01/2023