Offset printing press

Sakurai OL575SD - 5 colori + L

Condition: used, Year of construction: 1999, color channels: 8, We offer this used Heidelberg Speedmaster 74 8 Color Plus Coater 4/4 offset printing press, year of construction 1999. Manufacturer: Heidelberg Model: Speedmaster 74 8 Color Plus Coater Perfecting 4/4 or Straight Year of manufacture: 1999 Console CPC 1.0.4 Technotrans Cooling Unit Condition: used Category ID: 839 Type ID: 520 Type: offset printing press Ljdpfeynvursx Akfjrk If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,89,90,620 h, functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 360 mm, type of input current: three-phase, Equipment: documentation/manual, The machine is with console and are also a two-way print. Lodjwa Ulzspfx Akfjrk

Condition: used, Selling as a package Dominant 715, Dominant 547 & PlateRite CTP Please see out other adverts to see the other machines. Lrodpowxtrqofx Akfok One color offset. Format A2

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Lrsdpfx Aewp Rqfjkfek Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Lrodpfxotyqhqo Akfsk

Condition: excellent (used), Year of construction: 2012, Offer very good flexo imprinting machine. Lrsdpfjqmnfhox Akfok Manufacturer is the company Sondermaschinenbau Oschersleben. Flexo machine 1 color. Very well maintained condition and ready for immediate use incl. various extras.

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Ljdpfxehwrgtj Akferk The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, RMGT 790ST-4 Year 2016 4 colors SAPC, Matic, paper size preset, S type, size 600x788 mm, all wash-ups, chromed impression cylinders. Lodoyyw Tnopfx Akfork

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. Ljdpfeuf Sy Aex Akfsrk All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Lrsdpfx Asif Ek Rekfsk • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.